• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.565-568
• /
• 2011

NURBS는 매개변수를 이용하여 3차원에서 곡면을 표현한 방법으로서 노트벡터, 조정점, 가중치로 구성된다. 레벨셋은 공간을 음함수로 정의된 장으로 형성하여 음함수의 일정한 값을 추적하여 곡면을 표현한 방법이다. 본 논문에서는 스캔 데이터를 NURBS 형태로 추출한 뒤 이를 정밀한 레벨셋 모델로 변환하였다. 레벨셋 모델을 구성하기 위해서 형성된 음함수는 부호를 갖는 거리함수를 사용하였고, 거리함수를 정밀하게 나타내기 위해 Newton 순환법을 이용하였다. 변환된 레벨셋 모델을 이용하여 형상의 몰핑을 수행하였다. 몰핑은 초기 형상을 목표 형상으로 변화시켜 나가는 과정으로서 레벨셋 모델을 이용한 몰핑은 용이성과 질적인 측면에서 우수하다. 수치 예제에서는 스캔 데이터의 레벨셋 모델 변환과 변환된 형상이 자연스럽게 목표형상으로 변화하는지를 확인한다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1999.10a
• /
• pp.122-123
• /
• 1999

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.279-288
• /
• 2015

Using the Vehicle Modeling Function, which can model various 3D nose shapes, nose shape optimization is performed to reduce the aerodynamic drag of the KTX Sancheon. 2D characteristic shapes of the KTX Sancheon nose were extracted and a base model of the KTX Sancheon was constructed for design optimization using the Vehicle Modeling Function. The design space was constructed with the base model and does not violate the shape constraints of commercial trains. Through nose shape optimization with the Broyden-Fletcher-Goldfarb-Shanno algorithm, the aerodynamic drag of the optimized shape was reduced by 6% compared to that of the base model. The longer nose and sharper edge of the optimized shape weaken the vortices behind the last car and can reduce the aerodynamic drag.

• The Korean Journal of Applied Statistics
• /
• v.9 no.2
• /
• pp.145-159
• /
• 1996

We propose an adaptive searching method using some spatial relations among sample points to estimate the interesting area in the spatial population. The fundamental idea is to observe the neighboring sample points when a sample point is satified with some condition of an adaptive searching observation. For obseving the sample points with this method to estimate the area the sample size is decreased. From this result, we may expect to reduce the cost and time consuming in observation the sample points and to draw the shape of the interesting area without prior information of an spatial population. Some analytical simulation results are also presented.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.3
• /
• pp.71-78
• /
• 2012

The dynamic behavior of spatial structures is different depending on the aspect ration of arch structure, as the rise-span ratio or open-angle, and these spatial structures show differently the character of seismic response in accordance with stiffness and connection of the lower support structures that are directly influenced by earthquake. Therefore, in this paper, dynamic analysis is conducted for seismic response of single layer arch structures by the influence of column's stiffness and connection, to reflect the different vertical and horizontal vibration mode of single layer arch structures. The vertical response of single layer arch structures is more influence by lower columns and the influence of column's connection rotational stiffness is not large, except to the hinged connections.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.695-696
• /
• 2021

최근 다양한 연령층과 직업군들 사이에서 기능성 신발에 대한 관심이 증대되고 있다. 그러나 기능성 신발 및 맞춤형 신발은 높은 가격대와 긴 제작 시간이 필요하다. 이러한 문제점은 3D 스캐너 도입으로 해결이 가능하나, 정확한 발 형상 측정이 가능한 3D 스캐너는 고가의 장비이기 때문에 매장별 보급이 어렵다. 본 논문은 기능성 신발의 보급을 위하여 저가형 3D 스캐너에서 정확한 발 고유 변인을 측정할 수 있는 시스템에 대해 서술한다. 이를 위해 이를 위해 저가형 Depth Camera를 이용한 저가형 3D 스캐너의 발 형상 3D 점군 데이터를 2차원으로 변형하고, 발 형태를 감싸는 최소 사각형(Min Area Rect)를 형성하여 발 안쪽점 및 발 가쪽점을 추정한다. 생성된 최소 사각형과 발 안쪽점 및 발 가쪽점 등은 발 고유 변인 측정의 기준이 된다. 실험 결과에서는 측정 기준을 이용하여 발 고유 변인인 발 길이, 발 너비, 발꿈치 너비, 발꿈치에서 발안쪽점 및 발 가쪽점 길이 등 5가지 고유 변인을 측정하는 것을 보여준다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.250-251
• /
• 2012

여러 분야에서 공간적 물리량, 패턴 또는 분포 등의 공간정보를 공간적으로 처리하는 방법이 연구 개발되어 왔다. 공간필터링 또는 공간필터법이라고 불리기도 하는 이 기법은 현재 직선 회전 군속도, 표면거칠기, 토석류속도, 형상, 결함 등 여러 계측분야에서 활용되고 있다. 이들 분야에 활용되는 공간필터는 복수개의 슬리트로 구성되며, 최상의 계측목적을 달성하기 위해서는 최적하중함수를 설계하여 각각의 슬리트에 맞는 하중값을 적용하여야 한다. 본 연구에서는 계측계의 간략화를 구현하기 위한 기초연구로서 기본이 되는 단슬리트의 구조 및 회전에 따른 필터링특성을 분석하였다.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2012

In the current construction planning and designing process, an architectural miniature model was designed to verify the interior or exterior spatial sense of a building structure, but building of the miniature model is demand much more effort and time; in addition to this it has limitation to identify interior information of the building. For a complement of it, CAD would be used in the existing planning and designing process to visualize the building information, but its visualization is not satisfactory for the 3D volume which could be easily verified with the miniature model. CAD is the specific software for designing building structures and the 3D results are usually rendered on 2D monitor screen. Therefore, there is a shortage of cognitive immersion for the 3D space. In this paper, we introduce the conversion process of BIM shape data into the Augmented Reality contents by using a series of softwares. As a result of modification on construction plan or design we reduced the cost and time to reconstruct the final visualization. We have shown that the interior or exterior information of the building structures are easily visualized with BIM shape data on augmented reality environment. Several proposed interaction methods, such as rem oval of building components, and slice-cut operation, provide the user for the effective manipulation of models on the augmented reality environment.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.123-134
• /
• 2004

In this research, a multilevel decomposition technique to enhance the efficiency of the configuration optimization of truss structures was proposed. On the first level, the nonlinear programming problem was formulated considering cross-sectional areas as design variables, weight, or volume as objective function and behavior under multiloading condition as design constraint. Said nonlinear programming problem was transformed into a sequential linear programming problem. which was effective in calculation through the approximation of member forces using behavior space approach. Such approach has proven to be efficient in sensitivity analysis and different form existing shape optimization studies. The modified method of feasible direction (MMFD) was used for the optimization process. On the second level, by treating only shape design variables, the optimum problem was transformed into and unconstrained optimal design problem. A unidirectional search technique was used. As numerical examples, some truss structures were applied to illustrate the applicability. and validity of the formulated algorithm.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.225-235
• /
• 2013

Cutter forces acting on a disc cutter in TBM are the key parameters for TBM design and its performance prediction. This study aimed to experimentally evaluate cutter forces with different ring shapes in a hard rock. The stiffness of a cutter ring was indirectly estimated from a series of full-scale linear cutting tests. From the experiments, it was verified that the rolling stress acting on a V-shape disc cutter was much higher than on a CCS disc cutter even though the penetration depth by a V-shape disc cutter could be increased in the same cutting condition. Finally, it is suggested that a prediction model considering the shape parameters of a disc cutter should be used for its better prediction.