• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1014-1017
• /
• 2007

Sound focusing technologies has been studied for various purposes from early 1990s. As a result, these technologies make us possible to apply in many uses. For example, we can treat tumors using focused ultrasonic waves without surgical knife and communicate in the ocean using time reversal array. Also applications for personal audio system become issues. Recently, as technologies are developing, in some applications, needs for regional focusing become increasing because previously suggested focusing methods, such as phase conjugation, time reversal and inverse filtering, were all about a point focusing. Therefore, studies on regional focusing method are essentially needed. Regional focusing method was firstly mentioned by Choi and Kim in 2002: acoustic contrast control. However, in regional focusing, physical interpretations between control variables and results are still not easy because of its complexity. In this regard, we tried to understand the relations between control variables and results in wavenumber domain and suggested a solution method for regional focusing: wavenumber spectrum matching. We also showed how to make spatially focused sound shape using the suggested method from the simplest case: line focusing.

• Tunnel and Underground Space
• /
• v.14 no.2
• /
• pp.154-166
• /
• 2004

A numerical stability analysis was conducted on the large oil storage caverns excavated in a rock mass under high initial horizonal stress. The behaviors of the surrounding rock mass, rockbolts, and shotcrete were analyzedr and stability of the support members were assessed. For a proper support system design, the effect of the modelling technique, cavern shape and rockbolt length on the stability of the cavern was investigated. Results show that installation timing of supports and the change in cavern shape due to stepwise excavation affect the stress induced in support members. Also found was desperate need for a numerical technique which can properly reflect the behavior of the steel fiber reinforced shotcrete.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.241-244
• /
• 2004

전민동 성당은 얕은 팔각뿔대 형상의 지붕을 가진 팔각기둥의 형태로 재설계되었다. 팔각기둥의 형상은 마주보는 4쌍의 벽들로 인하여 공간에서 정상파가 발생하기 쉽고, 지붕 또한 둥근 형태로 음향 초점이 발생할 수 있는 등 여러가지 문제점을 가지고 있다. 이러한 형태의 전민동 성당에 대하여 여러 가지 음향 인자들을 예측하였고, 예측치와 측정치를 비교하였다. 사용된 음장해석 프로그램은 $CATT^{TM}$이고 예측 또는 측정된 음향인자는 RT, D50, C80 등이다. 건축물만의 특성과 전기음향설비가 포함된 음향특성을 비교하기 위하여, 무지향성 스피커를 이용한 측정과 성당에 장착된 전기음향장치를 이용한 측정을 수행하였다. 공연장과 마찬가지로 성당의 신도석에서도 음이 고르게 분포되는 것이 바람직하며, 신도석에서의 음압분포를 예측과 측정을 통하여 비교하여 보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1192-1196
• /
• 2010

As the space for installation of automotive exhaust system is limited, the space should be optimized with relation to the endurance and shape of the system. Geometric nonlinear analysis was used and deflection of bellows was assumed 6mm. Obtained results are as follows; (1) The Von-Mises stress of bellows is increased with increase of thickness or radius of bellows linearly. (2) As the principal stress varies according to the radius of convolution, it is necessary to decide the optimal radius of convolution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2219-2228
• /
• 2015

The proposed RDT(Reversed Double T) girder bridge is suitable to eco corridor, because of its cross section which resembles Korean alphabet vowel "ㅛ". The total height and cost of bridge would be reduced for its inner space containing some of plant soil. In this study, the performance of the RDT girder was assessed by comparing results of static test with those of nonlinear analysis. The cracking load of the RDT girder was evaluated more than two times of design load.

• Journal of Korea Water Resources Association
• /
• v.36 no.5
• /
• pp.741-749
• /
• 2003

This study presents a combined experimental and numerical effort to investigate experimentally and numerically the Bragg reflection of sinusoidal waves due to trapezoidal submerged porous breakwaters. Numerical predictions of the study are verified by comparing to laboratory measurements. In the numerical model, the flow in porous structures is described by the spatially averaged Navier-Stokes equations and the volume of fluid method is employed to track the free surface displacements. Numerical solutions are agree well with laboratory measurements. The reflection coefficients of porous structures are smaller than those of non-porous structures and become stronger in proportion to the increase of number of submerged breakwaters.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.181-187
• /
• 1995

Recent researches in dynamics are focused on finding effective methods to analyze the dynamic behavior of structures by fewer mode shapes their number of dgrees of freedom. Ritz algorithm and mode acceleration method were developed to improved the mode superposition. Ritz algorithm can include distribution of external loads but be apt to lose the orthogonality condition, which is useful properties in the analysis. Also mode acceleration method should consider a large number of mode shapes to get a satisfactory results. Another method, combining previous two method, was developed but too much computational efforts and times were required. The purpose of this study is to develop and evaluate the Ritz algorithm modified with the lanczos algorithm to improve the efficiency and accuracy. As a result of !this study, dynamic analysis using modified Ritz algorithm was proved to be the rational analysis method.

• Journal of Power System Engineering
• /
• v.11 no.4
• /
• pp.18-25
• /
• 2007

제 2세대 직접분사식 가솔린 기관에서 6공 연료분사기의 연료분무특성을 관찰하였다. 실험에 사용한 직접분사식 가솔린 기관은 2개의 흡입밸브와 2개의 배기밸브를 갖는 텀블형 Spray Guided 연소실과 Quartz로 제작된 실린더 라이너와 실린더 헤드 창으로 구성되어 있다. 선회유동을 유도하기 위하여 흡입매니폴드에 선회유동 제어밸브를 부착하였다. 2차원 Mie 스캐터링 기법을 이용하여 연료분사시기, 연료분사압력과 실린더 내 유동 및 냉각수 온도가 연료분무에 미치는 영향을 관찰하였다. 실험결과로는 흡기과정동안 흡기 선회유동은 분사된 연료의 공간적 분포에 크게 작용하였고, 압축과정동안에는 텀블 및 선회유동의 영향이 흡기과정에 비해 크지 않음을 확인하였다. 또한 성층연소를 위해서 압축과정에서 연료를 분사하는 경우 고압의 연료분사압은 분무도달거리의 성장을 촉진시키나 상승하는 피스톤과 이로 인한 실린더 압력의 상승으로 분무도달거리의 성장이 억제됨을 확인할 수 있었다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.15-17
• /
• 2009

The line simplification method based on the turning function is studied in this paper for conversion of ground plan data to geospatial data to update the digital map. This method eliminate vertices effectively by estimating the length and the angle between the vertices based on the turning function which is useful to express the shape of linear feature. As the result, this method shows high shape similarity, high elimination rate of vertices and 100% of satisfaction degree to the drawing rules. Thus this line simplification method is judged to be effective in updating the digital map with ground plans.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.538-541
• /
• 2002

탄소나노튜브 (CNT)가 도포된 평면형 에미터와 원형 개구의 게이트 전극을 가지는 삼전극 전계방출 소자의 전계방출 특성을 시뮬레이션하였다. 체계적인 시뮬레이션을 위해 소자 내 전위의 공간적 분포 특정을 결정하는 전계형상인자 $\gamma$를 정의하고 이 값에 따른 전위분포의 특성과 방출 전자의 궤적을 계산하였다. 계산 결과$\gamma$ > 1 인 전압조건에서는 에미터의 가운데를 중심으로 강한 전자방출이 발생하고 전자빔이 구조의 축 방향으로 자체 집속됨을 알 수 있었다. 이렇게 되면 에미터와 게이트의 정렬이 전혀 필요하지 않게 되며 또한 별도의 전자집속회로 없이도 에미터와 양극에 있는 형광체가 1:1 로 대응하는 획기적인 디스플레이 구조를 가능하게 해 준다 적정 전압조건에서 CNT의 전계강화인자 $\beta$의 변화에 따른 총 전류를 계산한 결과，$\beta$ >3000인 CNT를 사용할 경우 실제 소자로서 구현이 가능함을 확인하였다.