• Resources Recycling
• /
• v.23 no.3
• /
• pp.44-50
• /
• 2014

In this study, a method of shear crushing and a two-stage disk mill were introduced to grind the waste tire powder. Rubber chips with various size were obtained during the crushing or grinding step. The two-stage disk mill was composed of two drum-type blades rotating at various speed and in opposite directions. Therefore, more roughly surfaced particles of micronized waste tire powder were obtained using shear crushing rather than using conventional cutting crushing. In this study, the shape of shear-crushed waste tire particles was compared with conventional cutting crushing particles by scanning electron microscope. In addition, the particle size analyzer was employed to determine the appropriate particle size of waste ground tire powders obtained in this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.311-320
• /
• 2005

In this paper an enhanced quadratic finite element for static and dynamic analysis of plate structures is presented. The performance of a proposed plate element is improved by the coupled use of non conforming displacement modes, the selective integration scheme, and the assumed shear strain fields. An efficient direct modification method is also applied to this element to solve the problem such as failure of the patch test due to the adoption of non conforming modes. The proposed quadratic finite element does not show any spurious mechanism and does not produce shear locking phenomena even with distorted meshes. It is shown that the results obtained by this element converged to analytical solutions very rapidly tough numerical tests for standard benchmark problems. It is also noted that this element is applicable to transient dynamic analysis of Mindlin plates.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.315-325
• /
• 1997

This paper describes the application of discretized continuum-type optimality criteria (DCOC) and the development of optimum design program for the multispan partially prestressed concrete beams. The cost of construction as objective function which includes the costs of concrete, prestressing steel, non-prestressing steel and formwork is minimized. The design constraints include limits on the maximum deflection, flexural and shear strengths, in addition to ductility requirements, and upper and lower bounds on design variables as stipulated by the design Code. Based on Kuhn-Tucker necessary conditions, the optimality criteria are explicitly derived in terms of the design variables-effective depth, eccentricity of prestressing steel and non-prestressing steel ratio. The prestressing profile is prescribed by parabolic functions. The self-weight of the structure is included in the equilibrium equation of the real system, as is the secondary effect resulting from the prestressing force. An iterative procedure and computer program for updating the design variables are developed. Two numerical examples of multispan PPC beams with rectangular cross-section are solved to show the applicability and efficiency of the DCOC-based technique.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.515-522
• /
• 2017

In this paper, an isogeometric analysis for multipatch problem is investigated, in which two or more geometries are connected at the interface in a conforming or non-conforming conditions. To express higher continuity at the patch interface, two approaches such as Nitsche based method and master-slave method are formulated for the linear elasticity problem and discretized using the isogeometric approach using NURBS basis functions. A short comparison between two approaches in formulations reveals the pros and cons of them with the applicability in the isogeometric multipatch problem. In addition, a NURBS based stress recovery is adopted to express a better stress continuity through the post-processing. Numerical examples indicate the effectiveness of Nitsche method in the non-conforming patch, following the exact solution well. For the stress concentration problem with the conforming patch, introduced two methodologies show comparative results, meanwhile the NURBS based stress recovery presents an improved smooth stress contour in the whole domain including the patch interface.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.25-33
• /
• 2017

In this study, combustion tests were performed to investigate combustion performance of a pintle injector engine with double row rectangular slot which uses kerosene and liquid oxygens as propellants. The double row rectangular slot was designed to improve the combustion performance of a pintle engine with a single row and the blockage factor was changed from 0.7 to 1.0. The main design parameters of the double row were distance between rows, area ratio and aspect ratio. The characteristic velocity efficiency was measured from 92.4 to 96.9 percentage for double row but 86.8 percentage for single row. It showed the highest combustion performance at the BF 0.85.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.283-286
• /
• 2014

본 논문에서는 카메라형 OCR (Optical Character Reader) 기술을 이용해 오프라인 중고서점의 효율적 장서관리 시스템을 구축하기 위한 디지털 데이터화 관리시스템 방안을 제안한다. OCR은 광학적으로 인식할 수 있는 문자를 컴퓨터가 읽을 수 있도록 하는 기술이다. 원리적으로 문자 한 개를 수십 개의 모눈으로 분할해 특정한 모눈의 흑백 또는 자획형상 특징에 의해 문자를 판독한다. 이 논문에서는 OCR 기술을 활용함으로써 디지털 데이터화의 효과는 물론 적용 환경의 개선효과를 기대해 볼 수 있는 오프라인 중고서점 시장을 목표로 했다. 오프라인 중고서점에서 보유하고 있는 장서의 디지털 데이터화는 기업형 중고서점과의 경쟁에 있어서도 생존을 위해 필요한 요소이다. 카메라형 OCR 기술을 활용한 장서 디지털 데이터화는 오프라인 중고서점 판매자가 도서재고 검색 및 판매 관리 효율을 높이도록 도와줄 뿐 아니라, 도서판매 유형, 소비자 분석과 수요 예측을 가능하게 한다. 또한 소비자에게 오프라인 중고서점에서 보유하고 있는 희귀 장서와 중고서적들을 검색해 구입할 수 있는 편의를 제공할 것이다. 오프라인 중고서점 판매를 촉진하고 활성화시킨다면 출판의 선순환적 구조를 만드는 데 기여할 것으로 예상된다.

• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.320-326
• /
• 2011

This paper proposes a baseline-free SHM technique in which the time-reversal process of Lamb waves and the imaging method are used. The proposed SHM technique has three distinct features when compared with the authors' previously proposed one: (1) It use the reconstructed signal for damage diagnosis, without need to extract the damage signal as the difference between reconstructed signal and initial input signal; (2) It use the imaging method based on the time-offlight information from the reconstructed signal, instead of using a pattern comparison method; (3) In order to make the damage image more clear, the modified mathematical definition of damage image in a pixel is used. The proposed SHM technique is evaluated through the damage detection experiment for an aluminum plate with damage at different locations.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.94-102
• /
• 2016

This paper proposes a new prediction method to reduce times and labor of repetitive multi-physics simulation. To achieve exact results from the whole simulation processes, complex modeling and huge amounts of time are required. Current multi-physics analysis focuses on the simulation method itself and the simulation environment to reduce times and labor. However this paper proposes an alternative way to reduce simulation times and labor by exploiting machine learning algorithm trained with data set from simulation results. Through comparing each machine learning algorithm, Gaussian Process Regression showed the best performance with under 100 training data and how similar results can be achieved through machine-learning without a complex simulation process. Given trained machine learning algorithm, it's possible to predict the result after changing some features of the simulation model just in a few second. This new method will be helpful to effectively reduce simulation times and labor because it can predict the results before more simulation.

• Clean Technology
• /
• v.18 no.4
• /
• pp.410-418
• /
• 2012

The performance of the ammonia injection gun (AIG) used for maximizing the utilization of reducing agent in the selective catalytic reduction (SCR) system is decided by several parameters such as the pattern of flow distribution, geometry of the air distribution manifold (ADM) and the array and geometry of nozzles. In the study, the uniformity of jet flows from the nozzles in AIG was analyzed statistically by using the computational fluid dynamics (CFD) method to evaluate the role of design parameters on the performance of the SCR system. The uniformity of jet flows from the nozzles is being deteriorated with increasing the supplying flow rate to the AIG. Distribution rates to each branch pipe become lower with decreasing distance to the header, and flow rates from nozzle are also reduced with decreasing distance to the header. The uniformity of jet flows from nozzles becomes stable significantly when the ratio of summative area of nozzles to each sectional area of the branch pipe is below 0.5.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.5
• /
• pp.39-48
• /
• 2007

Recently, the trend of construction has been concentrated on the development of structural systems improved economically. As a result, the usage of High Performance Steel which simplifies the girder structures and shortens the construction time is increasing. Also the interest in Longitudinally Profiled(LP) plate as a structural element for girders has been increased. The LP can distribute efficiently the sectional force applied to the structure, and also reduce the self-weight and the number of welding points. The LP plate was developed in Europe originally and its application has been increased rapidly on steel structures in Korea. Though it is used widely and internationally, the study for the LP plate application is rarely performed. In this paper, sectional stress and deflections were analyzed in the different section types by solid element in the finite element method; finally the workability, as well as economical efficiency of the LP plate produced in Korea was evaluated.