• Smart Media Journal
• /
• v.11 no.1
• /
• pp.46-57
• /
• 2022

In this paper, multi-region based Radial Graph Convolutional Network (MRGCN) algorithm which can perform end-to-end action recognition using the optical flow and gradient of input image is described. Because this method does not use information of skeleton that is difficult to acquire and complicated to estimate, it can be used in general CCTV environment in which only video camera is used. The novelty of MRGCN is that it expresses the optical flow and gradient of the input image as directional histograms and then converts it into six feature vectors to reduce the amount of computational load and uses a newly developed radial type network model to hierarchically propagate the deformation and shape change of the human body in spatio-temporal space. Another important feature is that the data input areas are arranged being overlapped each other, so that information is not spatially disconnected among input nodes. As a result of performing MRGCN's action recognition performance evaluation experiment for 30 actions, it was possible to obtain Top-1 accuracy of 84.78%, which is superior to the existing GCN-based action recognition method using skeleton data as an input.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.641-647
• /
• 2008

This paper introduces a new technique that can extract natural frequencies and damping ratios from output-only vibration data. Firstly, the free vibration data is obtained from the cross correlations of the output-only response data using a singular value decomposition process. Secondly, the well-known system identification algorithm is applied to extract the natural frequencies and damping ratios from the extracted free vibration data. Comparing to ERADC technique, the accuracy of the proposed modal parameter identification algorithm has been numerically examined. Furthermore, the practicability of the proposed algorithm has been examined through the output-only acceleration data collected from the Seohae cable-stayed bridge. Using the proposed technique, total 24 modes have been identified for the deck plate motions of the bridge.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.292-295
• /
• 2009

본 논문에서는 평판구조물의 정적 및 동적해석에 사용할 목적으로 성능이 향상된 평판유한요소를 제시하였다. 이 요소는 비적합변위형과 선택적 감차적분방법 그리고 대체전단변형률장을 복합적으로 적용하여 각각의 장점들을 포함하는 향상된 거동을 보여주고 있다. 또한 비적합변위형의 적용으로 발생되는 조각시험의 실패 문제점을 해결하기 위하여 직접수정법을 평판유한요소의 개선에 사용하였다. 대표적인 검증문제에 대한 수치해석작업을 통하여 본 연구에서 개발한 요소는 가상적인 제로에너지모드 및 전단잠김현상의 발생과 같은 문제를 나타내지 않음을 알 수 있었다. 특히 찌그러진 형상으로 모형화 한 경우에 있어서도 전단잠김현상이 발생하지 않았다. 본 연구에서 수행한 동적반응해석 시험에 있어서도 이론해와 잘 일치하는 결과를 보여주었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.349-353
• /
• 1993

공정게획은 일반적으로 숙련된 공정계획자에 의해 결정되는 데 공정계획자의 육성및 보급이 어려우므로 자동공정계획시스템의 필요성이 대두되었다. 지난 80년대에는 공정계획자의 지식에 의존한 공정계획의 알고리즘 개발에 치중하였지만 실용적인 측변에서 효율이 떨어지는 관계로 산업계에서 외면당하는 경우가 종종 발생하였다. 이러한 문제를 해결하고자 본 연구에서는 AutoCAD로 부터 자동 또는 대화식으로 부품의 형상 및 치수데이터를 인식하여, 이 데이터를 기준 으로 최적의 공구선정이 가능하게 데이터베이스를 구축하였다. 공작물의 크기에 따라 적절한 공작기계의 선정이 가능하도록 하였으며, 공구의 이동속도는 회귀분석방법에 의해 재질별로 구분하여 표준작업시간 계산규칙 및 알고리즘을 개발하였다

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2315-2327
• /
• 1992

A robot assembly method which uses configuration and force/torque information of tactile sensor system and performs chamferless peg-in-hole tasks is suggested and experimentally studied. When the robot gripes the peg with random orientation, the realignment of the peg to the hole center line is successfully performed with the gripping configuration information of the tactile sensor and the inverse kinematics of the robot. The force/torque information of the tactile sensor makes it possible to control the contacting force between mating parts during hole search stage. The suggested algorithm employs a hybrid position/force control and the experiments show that the algorithm accomplishes well peg-in-hole tasks with permissible small contacting force. The chamferless peg-in-hole tasks with smaller clearance than the robot repeatibility can be excuted without any loss or deformation of mating parts. This study the possibility of precise and chamferless parts mating by robot and tactile sensor system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.63-68
• /
• 2010

Recently, to accelerate the Ubiquitous generation, the input interface of the mobile machinery and tools are actively being researched. In addition with the existing interfaces such as the keyboard and curser (mouse), other subdivisions including the handwriting, voice, vision, and touch are under research for new interfaces. Especially in the case of small-sized mobile machinery and tools, there is a increasing need for an efficient input interface despite the small screens. This is because, additional installment of other devices are strictly limited due to its size. Previous studies on handwriting recognition have generally been based on either two-dimensional images or algorithms which identify handwritten data inserted through vectors. Futhermore, previous studies have only focused on how to enhance the accuracy of the handwriting recognition algorithms. However, a problem arisen is that when an actual handwriting is inserted, the user must select the classification of their characters (e.g Upper or lower case English, Hangul - Korean alphabet, numbers). To solve the given problem, the current study presents a system which distinguishes different languages by analyzing the form/shape of inserted handwritten characters. The proposed technique has treated the handwritten data as sets of vector units. By analyzing the correlation and directivity of each vector units, a more efficient language distinguishing system has been made possible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.59-68
• /
• 1999

Recently, research and developmental direction of communication system is concurrent adopting voice data and face image in speaking to provide more higher recognition rate then in the case of only voice data. Therefore, we present a method of lipreading in speech image sequence by using the 3-D facial shape model. The method use a feature information of the face image such as the opening-level of lip, the movement of jaw, and the projection height of lip. At first, we adjust the 3-D face model to speeching face image sequence. Then, to get a feature information we compute variance quantity from adjusted 3-D shape model of image sequence and use the variance quality of the adjusted 3-D model as recognition parameters. We use the intensity inclination values which obtaining from the variance in 3-D feature points as the separation of recognition units from the sequential image. After then, we use discrete HMM algorithm at recognition process, depending on multiple observation sequence which considers the variance of 3-D feature point fully. As a result of recognition experiment with the 8 Korean vowels and 2 Korean consonants, we have about 80% of recognition rate for the plosives and vowels. We propose that usability with visual distinguishing factor that using feature vector because as a result of recognition experiment for recognition parameter with the 10 korean vowels, obtaining high recognition rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.783-788
• /
• 2002

Recently, research and developmental direction of communication system is concurrent adopting voice data and face image in speaking to provide more higher recognition rate then in the case of only voice data. Therefore, we present a method of lipreading in speech image sequence by using the 3-D facial shape model. The method use a feature information of the face image such as the opening-level of lip, the movement of jaw, and the projection height of lip. At first, we adjust the 3-D face model to speeching face Image sequence. Then, to get a feature information we compute variance quantity from adjusted 3-D shape model of image sequence and use the variance quality of the adjusted 3-D model as recognition parameters. We use the intensity inclination values which obtaining from the variance in 3-D feature points as the separation of recognition units from the sequential image. After then, we use discrete HMM algorithm at recognition process, depending on multiple observation sequence which considers the variance of 3-D feature point fully. As a result of recognition experiment with the 8 Korean vowels and 2 Korean consonants, we have about 80% of recognition rate for the plosives md vowels.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.6
• /
• pp.704-709
• /
• 2003

The digital image can be distorted by a noise for a transmission or other elements of system. It happen to be vague of a boundary side in the division of an image object, especially, boundary side of an input image is very important because it can be determined to the division and detection element in pattern recognition. Therefore it is proposed an edge detection method of optimal to divide and detect exactly a boundary part. In this paper, it detected the optimal edge with applying this image to Meyer wavelet-CNN algorithm, after it does level up a boundary side of an image by using the adaptive morphology as the threshold of an input image. It confirmed that the proposed algorithm is more superior to the conventional methods and the conventional Sobel method which is an image edge detection algorithm. Especially, it is confirmed by simulation that the proposed algorithm can be got the better result edge at the place of closing to each edges and having smoothly curved line.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1767-1775
• /
• 2010

As factory automation is getting popular, there has been a lot of research concerned with stereo vision systems as a part of an automation system with unmanned moving equipment. In the stereo vision system, information about an object could be gained by searching through images. Edges which are based on the information about an object are used to find the position of the object and send a message of its position coordinate to a unmanned crain. This thesis proposes an algorithm to find the center point of the object's surface which is connected to the unmanned crain's hookblock, and to recognize the shape of the object by using two CCD cameras. At first, getting information about the edges, and distinguishing each edge's characteristics depend on user's option, and then find the location information by a set of positions that are proposed. This thesis is expected to be devoted to the development of an automation system of unmanned moving equipment.