• Journal of Internet Computing and Services
• /
• v.12 no.4
• /
• pp.35-43
• /
• 2011

Cognitive Radio (CR) ad hoc network is highly considered as one of promising future ad hoc networks, which enables opportunistic access to under-utilized licensed spectrum. Similarly to other CR networks, the spectrum sensing is a prerequisite in CR ad hoc network. Collaborative spectrum sensing can help increasing sensing performance. For such an infrastructureless network, however the coordination for the sensing collaboration is really complicated due to the lack of a central controller. In this paper, we propose a novel collaborative spectrum sensing scheme in which the final decision is made by the node with the highest data reliability based on a sequential Dempster Shafer theory. The collaboration of sensing data is also executed by the proposed contention-aware reporting mechanism which utilizes the sensing data reliability order for broadcasting spectrum sensing result. The proposed method reduces the collecting time and the overhead of the control channel due to the efficiency of the ordered sequential combination while keeping the same sensing performance in comparison with the conventional cooperative centralized spectrum sensing scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.421-427
• /
• 2009

This paper has proposed 1-2-1 coded cooperative communication that is a combination of STBC and ARQ. Coded cooperative communication is a protocol that integrates channel coding with cooperative communication. In this paper consider convolution encoder. ARQ method can increase the spectral efficiency than conventional cooperative communication because if the received signal from source node is satisfied by the destination preferentially, the destination transmits ACK message to both relay node and source node and then recovers the received signal. Where each relay 1, 2 forwards a punctured portion of receive data. When relay transmit to destination apply STBC the reliability to increase. Moreover this protocol can get better BER performance of receiver using simple comparator. We verified BER performance for the proposed protocol through Monte-Carlo simulation over Rayleigh fading plus AWGN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.624-631
• /
• 2007

This paper presents inter-cell cooperation methods with two transmit antennas for broadcast services in a coded OFDM cellular system. In the method, cells are divided into multiple cell groups and a coded packet is partitioned into the subparts. Then, a different cell group and antenna combination is assigned to each subpart for transmission of two orthogonal branches of the diversity code. For the method, we derive the bound on the pairwise error probability to predict the coded performance and verify the performance gain of the proposed method through the simulation using turbo code and analytically derived bound.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.61-68
• /
• 2009

In this paper, we propose a Cluster-based Cooperative Routing using ARQ (CCRA) for supporting both reliability and transmitting efficient service in mobile ad-hoc wireless sensor networks with Rayleigh fading environments. The main contributions and features of this paper are as follows. First, the clustering method which uses the position information of nodes as underlying structure for supporting reliable transmission services is used. Second, the cooperative data transmission method based on the underlying clustering informations is used to improve both reliability and data transmission efficiency. Third, the ARQ-based transmission is used to improve transmission reliability. Fourth, we consider a realistic approach, in the points of view of mobile ad-hoc wireless sensor networks, based on mobile sensor nodes as well as fixed sensor nodes in the sensor fields while the conventional research for sensor networks focus on mainly fixed sensor networks. The performance evaluation of proposed routing protocol implemented via simulation using Optimized Network Engineering Tool (OPNET) and theoretical analysis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.24-29
• /
• 2010

Selection-type relaying protocol, which is one of cooperative relaying protocols, provides low decoding complexity and improved system performance due to selection diversity. In this paper, we deal with linear precoding technique that minimize the error probability of cooperative MIMO system. Under the assumption that full channel state information is available at whole nodes, linear source and relay precoders, which minimize mean squared error of the estimated symbol vector, are proposed. Moreover, unlikely to the conventional selection-type relaying protocol using a fixed threshold signal-to-noise-ratio, new transmission link selection algorithm selects direct link or relay link as a transmission link, is introduced. Simulation results show that the proposed linear precoder with the transmission link selection algorithm outperforms the conventional precoders for two-hop relaying protocols or selection-type relaying protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.577-584
• /
• 2010

In this paper, a cooperative MAC protocol that is reliable over bad wireless channel environments and thus can enhance the system performance much more is proposed. Its performance is evaluated with the computer simulation. The system throughput and average waiting delay are used as performance measures. According to numerical results, the proposed MAC protocol provides better system throughput by 24% than the traditional rDCF scheme. From the average waiting delay point of view, when the number of terminals is small, the proposed MAC protocol has the better performance in an average view-point than the rDCF scheme. However, when the number of terminals is large, the proposed MAC protocol provides a little worse performance than the rDCF scheme. That is because, when the number of terminals is large, the dominant factor affecting the system performance is channel contention procedure, which results in lots of collisions. However, if the queuing delays in the waiting buffers are included for calculating the average waiting delay, then the total system delay will be smaller than the rDCF scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5C
• /
• pp.479-486
• /
• 2010

In this paper, we propose a novel low-complexity Alamouti coded orthogonal frequency division multiplexing (OFDM) scheme for asynchronous cooperative communications. Exploiting the combination of OFDM symbols at the source node and simple operations including sign change and complex product at the relay node, the proposed scheme can achieve cooperative diversity gain without use of time-reversion and shifting operations that the conventional scheme proposed by Li and Xia needs. In addition, by using the cyclic prefix (CP) removal and insertion operations at the relay node, the proposed scheme does not suffer from a considerable degradation of bit-error-rate (BER) performance even though perfect timing synchronization is not achieved at the relay node. From the simulation results, it is demonstrated that the BER performance of the proposed scheme is much superior to that of the conventional scheme in the presence of timing synchronization error at the relay node. It is also shown that the proposed scheme obtains two times higher diversity gain compared with the conventional scheme at the cost of half reduction in transmission efficiency.

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.345-355
• /
• 2012

The WiMedia Alliance has specified a Distributed Medium Access Control (D-MAC)/WUSB protocol based on UWB for high speed wireless home networks and WPANs. In this paper, we propose a novel SoQ-based cooperative communication protocol adaptive to current UWB link transmission rate and QoS measure. The proposed SoQ-based cooperative communication protocol has compatibility with current WiMedia D-MAC/Wireless USB standard and is executed at each device according to a SoQ-based Relay Node Selection (RNS) criterion.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.95-103
• /
• 2009

In this paper, a generation method of transmit and receive beamforming vectors based on base station cooperation is proposed which maximizes the user SINR in mobile cellular multi-user MIMO systems. There are two main sources of interference which deteriorate the performance of the system, i.e. the inter-user interference caused by the usage of the same radio resource for multiple users in the system, and the inter-cluster interference from neighboring base stations which are not participating in cooperative transmission. The proposed scheme cancels out the inter-user interference by using the block diagonalization(BD) method, and mitigate the inter-cluster interference by using optimal transmit and receive beamforming vectors based on optimal combining(OC) with the statistic information of inter-cluster interference. We perform computer simulations to verify the performance of the proposed scheme, and compare the result to the conventional performance obtained from utilizing the receiver side information only or utilizing the information from neither sides. The performance evaluations are conducted not only over the independent MIMO channels, but over correlated MIMO channels to demonstrate the robustness of the proposed scheme over the channels with correlation among antennas.

• Electronics and Telecommunications Trends
• /
• v.20 no.4 s.94
• /
• pp.176-188
• /
• 2005

분산 네트워크 환경을 기반으로 다양한 시스템과 장비가 서로 연결되어 사용되고 있는 현재의 IT 환경의 문제점을 해결하기 위해 DMTF는 선도적인 기업 및 교육 기관과 협력하여 이기종 시스템간 상호호환성을 제고하기 위한 시스템 자원 관리 표준 규격을 제정해 나가고 있으며, 그 중 하나가 WBEM 표준이다. 이 표준에서는 공통 정보 모델인 CIM을 비롯하여 데이터를 인코딩하고 전송하기 위한 XML과 HTTP를 표준으로 채택하고 있으며, CIM 데이터를 더욱 효과적으로 표현하고 전송하기 위해 필요한 XML문서의 형식과 태그 그리고 HTTP 헤더와 오류 코드 등을 추가로 정의하고 있으며, 이들 표준의 적용에 있어 필요한 몇몇 요구사항들도 정의하고 있다. 본 고에서는 표준 규격을 바탕으로 WBEM 표준에서 채택하고 있는 데이터의 전송방식에 대해 자세히 소개하고, 끝으로 현재 WBEM 표준이 갖고 있는 문제점과 주요 이슈를 함께 살펴보고자한다.