• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.1-6
• /
• 1989

Narrowband bandpass weveguide filters using inductive post obstacles in rectangular waveguide are designed and constructed to have an equal-ripple bandwidth of 50MHz (0.56% fractional band-width) at a center frequency of 9GHz. Both the triple-post and the single-post configurations are realized and compared. The measured center frequency, bandwidth, and attenuation characteristics for both filters show good agreement with the theoretical calculations. When the two filters are compared, the insertion loss characteristic of the triple-post filter is better than that of the single-post filter by 0.8dB at the passband.

• Journal of Advanced Navigation Technology
• /
• v.5 no.2
• /
• pp.141-148
• /
• 2001

This paper describe the development of narrow-band passband filter with small package and low loss, high selectivity performance. This filter is placed between power amplifier and frequency mixer of IMT-2000 mobile equipment. The elliptic-function narrow-band passband filter is designed with new architecture using the microstrip line. This package is very small by $3.2cm{\times}1.25cm$ and have the 3 % 3 dB bandwidth. Also in the passband the insertion loss is about 2.5 dB and is better than older RF SAW filter(insertion loss: 3.2 dB). In the stop-band it has the two deep notch under the -56 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.214-217
• /
• 2004

In this paper, a Ka-band LTCC (low temperature co-fired ceramic) narrow bandpass filter (BPF) is firstly presented. This BPF shows very narrow 3dB fractional bandwidth of 4.5 ％ centered at 28.7㎓. The advantages of multi-layered LTCC technology such as high integration and vertical stacking capabilities were employed to design three-dimensional interdigital end-coupled embedded microstrip narrow BPF. The difficulties in controlling the precise distance between two adjacent resonators in LTCC end-coupled BPF were overcome by locating the resonators on different layers. The measured insertion loss is 3dB at 28.7㎓, pass band is from 27.9 ㎓ to 29.2 ㎓, and the return loss in the pass band is less than 10 dB.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.184-188
• /
• 2006

This paper presents DSP based narrow band satellite communication signal power detector for tracking control of mobile satellite antenna system. An analog filter based conventional power detector has poor performance due to frequency drift of carrier. Also, it is very difficult to change an analog filter bandwidth according to changed bandwidth of transmitted signal. To solve these difficulties, we proposed DSP based signal power detector, which is easy to change bandwidth of filter and to match shifted frequency of carrier. The proposed signal power detector consists of a FFT function to measure frequency drift of carrier, a programmable filter bank function to limit of received signal bandwidth and a power calculation function to measure power of filtered signal in 12-bit linear scale. Test results of implemented signal power detector, based on TMS320C5402 DSP, showed that it satisfied required functions and performances and properly operated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1305-1312
• /
• 2000

This paper presents the design and implementation of the CPW end-coupled band-pass filter with the finitely backed conductor (FBC). To reduce the large insertion loss in CPW structure, the improvement in loss characteristic through the change of CPW structure is introduced. The CPW filters with narrow bandwidth are suggested and characterized for their microwave performance using the finitely backed conductor. This structure

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.37-42
• /
• 1993

In this study of statistical characteristics of roll response of ships to narrow band exciting moment generated by passing white noise through a linear filter is investigated. The parameters of linear filler are determined by comparing the results of exciting moment generated through filler equation tilth those evaluated from JONSWAP spectrum. The statistical results of the roll response of shops are presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.68-73
• /
• 2011

In this paper, a compact-narrow open stub band-pass filter with parasitic-signal of low frequency range and second harmonics rejected using the parallel coupled line and FLCLM(Frquency Locked Controlled Length Method) is proposed. The characteristic of the parallel coupled line can be rejection for parasitic-signal of low frequency range and second harmonics. In last filter of experimental results show that insertion loss is 1.2 dB and return loss is 14.8 dB, and the fractional bandwidth is 10 % at the center frequency of 5.8 GHz. In additional, the rejection for parasitic-signal of low frequency range and second harmonics are 28.9 dB and 28.8 dB, respectively.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1666-1667
• /
• 2011

본 논문에서는 CSRR을 이용하여 0.5~1.5GHz 대역의 광대역 필터를 최적 설계 연구 하였다. Metamaterial의 일종인 CSRR은 LC 공진기 역할을 하며 전송선로와 결합하여 필터 특성을 나타낸다. 또한 높은 Q-factor의 특성을 갖기 때문에 협대역 대역통과 필터 특성을 갖는다. 이에 본 논문에서는 CSRR을 이용하여 광대역 대역통과 특성을 갑기 위해서 전송선로의 형태를 변형하고 진화알고리즘중 하나인 진화 전략기법을 이용하여 단일 셀의 최적 설계를 수행하였다. 이후 단위 셀을 다단으로 연결하여 최종 광대역 필터를 설계하였다. 본 논문에서 설계된 광대역 필터는 0.5~1.5GHz의 대역폭을 갖으며 00~00dB의 삽입손실을 갖는다. 그리고 저지대역에서 00~00dB의 저지 특성을 갖는다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.3
• /
• pp.151-158
• /
• 2018

This paper proposes a new design method for narrow bandpass filters using two cascaded hairpin step impedance resonators (SIRs) with wideband harmonic suppression. The proposed bandpass filter utilizes a suspended strip line (SSL) to maximize the characteristic impedance ratio, thereby maximizing the harmonic suppression bandwidth. As an example of the proposed design method, the SSL bandpass filter with a center frequency of $f_0=1.4GHz$ and fractional bandwidth of 5 % was implemented, and proved to suppress harmonics up to $7.5f_0$ with a passband insertion loss of approximately -0.9 dB. This result implies that the proposed SSL narrow bandpass filter (NBPF) can suppress the harmonic bandwidth more than two times as compared with the filter design on a microstrip line (MSL).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.84-90
• /
• 2010

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR(Stepped Impedance Resonator) and multi-grade type structures than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 20.9 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.