• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.21-28
• /
• 2018

Despite a number of studies on consolidation behavior that have been carried out in the Nakdong River estuary in Busan, these are focused on the prediction of final settlement during ground improvement process, and there is almost no research on the long-term settlement occurring after that. For the practical study on the long-term settlement, the field monitored settlement data that measured over 10 years in the Busan new port facilities area were used, and the final settlement and predicted time-settlement line were constituted by hyperbolic function. As a result, the measured settlements depend on the thickness of clayey soils, and the pattern were similar to each other and good agreement with the predicted time-settlement line using hyperbolic method. Also, the settlement in the lower non-improved layer occupied 62-76% of total settlement. Information about above results would be quite helpful to understand the long-term settlement behaviors as well as the non-improved layer's settlement is more careful consideration needed at design phase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.660-667
• /
• 2018

This study examined the optimal manufacturing conditions of RDF using heat-dried sludge from sewage treatment plant in Cheonan with the oil-drying method. The amounts of oil evaporation and oil drying of the heat-dried sludge were measured at different temperatures to evaluate the value of the product. The performance of the product was then measured using a calorimeter and TGA. In addition, the concentration of odor, NH3, H2S, and TVOC during drying was determined using a portable odor-meter. Ingredient analysis was performed by EDS. Considering mass-production, the oil to heat-dried sludge weight ratio was fixed to 4:1. At $130^{\circ}C$, only physical mixing occurred after the instantaneous drying of internal water. Considering the eco-friendly aspects, there was no significant difference in the drying efficiency between $160^{\circ}C$ and $190^{\circ}C$. Therefore, the optimal conditions were a drying temperature of $160^{\circ}C$ within 5 minutes. Finally, the RDF manufactured in this study and fuel used in the thermal power plants were compared. The calorific value was 4,449kcal/kg, the water content was 2% and the ash content was 34%, which is higher than the fuel of thermal power plants. Therefore, it is believed that coal energy as well as wood pellets can be replaced.

• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.969-978
• /
• 2004

According to the report of hydrologic modeling study, from a quantitative point of view, a lumped model is more efficient than a distributed model. A distributed model has to simplify geospatial characteristics for the shake of restricted application on computer calculation and field observation. In this reason, a distributed model can not help having some errors of water quantity modelling. However, considering a distribution of rainfall-runoff reflected spatial characteristics, a distributed model is more efficient to simulate a flow of surface water, The purpose of this study is modeling of spatial rainfall-runoff of surface water using grid based distributed model, which is consisted of storage function model and essential basin-channel parameters( slope, flow direction & accumulation), and that procedure is able to be executed at a personal computer. The prototype of this model is developed in Heongseong Multipunose Dam basin and adapted in Hapchon Multipurpose Dam basin, which is larger than the former about five times. The efficiency coefficients in result of two dam basin simulations are more than about 0.9, but ones at the upstream water level gauge station meet with bad result owing to overestimated rating curves in high water level. As a result of this study, it is easily implemented that spatially distributed rainfall-runoff model using GIS, and geophysical characteristics of the catchment, hereafter it is anticipated that this model is easily able to apply rainfall data by real time.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.219-227
• /
• 2013

Although Mohr-Coulomb failure criterion has limitations in that it is a linear criterion and the effect of the intermediate principal stress on failure is ignored, this criterion has been widely accepted in rock mechanics design. In order to overcome these shortcomings, the Hoek-Brown failure criterion was introduced and recently a number of 3-D failure criteria incorporating the effect of the intermediate principal stress on failure have been proposed. However, in many rock mechanics designs, the possible failure of rock mass is still evaluated based on Mohr-Coulomb criterion and most of practitioners are accustomed to understanding the strength of rock mass in terms of the internal friction angle and cohesion. Therefore, if the equivalent Mohr-Coulomb strength parameters of the advanced failure criteria are calculated, it is possible to take advantage of the advanced failure criteria in the framework of the Mohr-Coulomb criterion. In this study, a method expressing the tangential Mohr-Coulomb strength parameters in terms of the stress invariant is proposed and it is applied to the generalized Hoek-Brown criterion and the HB-WW criterion. In addition, a new approach describing the geometric meaning of the ${\sigma}_2$-dependency of failure criteria in 3-D principal stress space is proposed. Implementation examples of the proposed method show that the influence of the intermediate principal stress on the tangential friction angle and cohesion of the HB-WW criterion is considerable, which is not the case for the 2-D failure criterion.

• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.33-42
• /
• 2000

This Paper is a Part of research Project series to analyze unique traffic characteristics observable within weaving sections on urban freeways. The research objectives were to establish with headway distribution and maximum Passing volume on weaving sections the basis of weaving designs that can promote safety and efficiency. Until now, when one wants to check the maximum Passing volume on weaving sections, it is taken for granted using headway distribution of freeway basic section. However. it was suspected in this research that for weaving sections different form of headway distribution had better be used. To prove this, field surveys were made to count headway intervals which supposedly were influenced not only by freeway basic section flows but also by weaving flows and later on used to develop headway distribution for weaving sections. For validation of the developed headway distribution, $x^2$-test was applied to three different data set of observed headways, currently used headway distribution for basic sections(Pearson Type III distribution) and new headway distribution. The result indicated new headway distribution as the most appropriate distribution form. Also, maximum passing volume within weaving sections was calculated based on new headway distribution and compared with Drew's maximum Passing volume.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.5-14
• /
• 2006

In general, the dredged ground was composed of a big difference of sediment shape through segregating sedimentary of finer soil in case of reclaiming by dredged coarse soils. Therefore, this study was performed to evaluate the change of settling velocity of flow, and the density of sedimentary which is based on settling tests and self-weight consolidation tests, and consolidation test by seepage force according to the percentage of coarse of Kunsan dredge soils. The Yano's method has been applied to estimate the settlement of self-weight consolidation in finer soils at design but it only considers pouring water content and elevation of interface, therefore the other method needs to be introduced for the exact prediction of the settlement of coarse soil in which the segregation sedimentation is occurring. In this study, the settlement of self-weight consolidation was calculated by the change of the density of segregating sedimentary of coarse and finer soils which was analyzed by Yano's method to extend a serious of researches. The self-weight consolidation by Yano's method will not reflect the segregated settling in dredging coarse soil under 40% of #200 passing percentage. As a result, the evaluation technique of settlement of self-weight consolidation considering a change of the density of segregating sedimentary is suggested as a reasonable method that considers the sediment shape of coarse soil.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.1
• /
• pp.1-12
• /
• 1983

The wave and hydrologic climate at a beach location are everchanging and coastal engineers have always been interested in the deformation of the natural beach caused by wave action over short or long interval of time. The drift of sand on a beach particulary manifests itself when blocked construction of seawalls, jetties, breakerwaters and groins etc.${\cdots}$ For this reason, the understanding and evaluation of littoral drift has been especially important to the coastal engineers. The resulting of the sand drift movement, such as the type of beach profile, width of beach, storage volume of the littoral sand over the profile are rapid everchange. We have studied the geological changes due to the littoral drift on a beach with field investigation and model tests in laboratory. But, it is impossible to make quantative correct analysis because of the factors are everchange and complicate. And then, most of study are incline to qualitative analysis. In this paper, authors studied mainly on the transition of beach profile and sediment storage on the profile using statistical field data as qualitative analytical method. The used theoretical beach transition model by Sonu and Beek have developed to obtain the change of HAEUNDAE beach backed with seawall. Results of this study indicate that the transition model are useful in the analysis of beach profile changement and the littoral drift movement on the beach. Qualitative analysises for HAEUNDAE beach are as follows. 1) Transition sequence of profile has 4 major transition for one cycle. 2) Storage sediment model of beach profile by Sonu and Beek well coincided with HAEUNDAE beach. 3) Seasonal cycle has ill-balanced process for the 5-yr. investigation.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.2
• /
• pp.43-55
• /
• 2012

In this study, the resistance bias factors are calculated to determine the resistance factor of Gravel Compaction Piles which is one of the soft ground improvement methods. In order to calculate resistance bias factors for gravel compaction piles, two ultimate bearing capacities were analyzed. One is the ultimate bearing capacity in 2.54 cm settlement measured using data of the field loading test on 41 piles and the other is the ultimate bearing capacity calculated using the seven equations concerning bulging failure. The results of analysis show that the probability density function of the calculated ultimate bearing capacities has a lognormal distribution. Resistance bias factor and the coefficient of variation for Greenwood equation are 0.91 and 0.38, respectively, and for those of Hughes & Withers are 1.19 and 0.39. The two equations are suitable for calculating resistance factors for LRFD of soil improvement using gravel compaction piles.

• Geotechnical Engineering
• /
• v.10 no.1
• /
• pp.71-82
• /
• 1994

According to the field measurement of dredging-reclaimed land, the actual self-weight consolidation settlement has been frequently reported to be less than the predicted values based on the laboratory tests results. The author estimates that one of the reasons is the reduction of the compressibility due to the sedimentation of the dredging material, Furthemore, the aging effect is ignored in the consolidation characteristics of the very low stress range as a pump dredging-reclaimed land. In this paper, a series of seepage consotidation tests has been carried out by applying the seepage force to the specimen prepared by sedimentation in consolidmeter in order to clarflfy the aging-effect on the compressibility of dredging clayey soil, Also, with a view to overcome unstable consolidation solution occurring in the case where the initial water content is higher as pumpdredging reclaimed land, the finite difference analysis technique using predictorforrector method is suggested that it gets good agreement with ezperimental results. Finally, the compressibility of the dredging clayey soil is depended on self-weight consolidation time.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.113-123
• /
• 2011

The application of micro-simulation model has been extended farther with improvement of computer performance and development of complicated model. To make a micro-simulation model accurately replicate field traffic conditions, model calibration is very crucial. Studies on calibration of micro-simulation model have not been enough while lots of studies on calibration of macro-simulation model have been continued in our country. This paper presents an auto-calibration of parameter values in micro-simulation model(VISSIM) using genetic algorithm. RMSE(Root Mean Square Error) of collected volume on the urban expressway versus simulated volume is set as MOP(measure of performance) and objective function of optimization is set as to minimize the RMSE. Applying to urban expressway(Nae-bu circular) as a case study, it shows that RMSE of optimized parameter values decrease 60.4%($19.3{\longrightarrow}7.6$) compared to default parameter values and the proposed auto-calibration system is very effective.