• Proceedings of the KSEG Conference
• /
• 2003.04a
• /
• pp.101-106
• /
• 2003

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.109-116
• /
• 2024

The Rapid Hardening Composite Mat (RHCM) is a product that improves the initial strength development speed of conventional Geosynthetic Cementitious Composite Mats (GCCM). It offers the advantage of quickly securing sufficient strength in railway slopes with insufficient formation level, and provides benefits such as preventing slope erosion and inhibiting vegetation growth. In this study, an analysis of the practical applicability of RHCM in railway settings was conducted through experimentation. The on-site applicability was assessed by categorizing it into fire resistance, durability, and stability, and conducting combustibility test, ground contact pressure test, and daily displacement analyses. In the case of South Korea, where a significant portion of the territory is composed of forested areas, the prevention of slope fires is imperative. To analyze the fire resistance of RHCM, combustibility tests were conducted as an essential measure. Durability was assessed through ground contact pressure tests to analyze the deformation and potential damage of RHCM caused by the inevitable use of small to medium-sized equipment on the construction surface. Furthermore, daily displacement analysis was conducted to evaluate the structural stability by comparing and analyzing the displacement and behavior occurring during the application of RHCM with railway slope maintenance criteria. As a result of the experiments, the RHCM was analyzed to meet the criteria for heat release rate and gas toxicity. Furthermore, the ground contact pressure was observed to be consistently above 50 kPa during the curing period of 4 to 24 hours under all conditions. Additionally, the daily displacement analyzed through field site experiments ranged from -1.7 mm to 1.01 mm, confirming compliance with the criteria.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1995.10a
• /
• pp.81-84
• /
• 1995

해안에 전파해오는 천해파는 주로 불규칙파이며, 이들의 천해변이를 해석하는 데 있어 스펙트럼파로 해석하는 기법을 많이 사용해 왔다. 본 연구에서 비교 검토된 두 수치모형은 유동훈(1993)의 쌍곡형 평균파 모형과 정신택(1990)의 타원형 모형인데, 두 모형 모두 실험조건에 적용하여 1차 검증을 확인하였던 것들이다. 본 연구에서는 영일만 일대에서 관측된 자료를 이용하여 두 수치모형의 현장검증을 수행하였으며, 관측결과와의 비교로부터 두 수치모형의 장단점과 특징을 비교하였다. (중략)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.133-135
• /
• 2011

플로팅 건축구조용 콘크리트 부유체 구조는 현장 근처의 제작장에서 제작한 후에 제작된 부재를 현장으로 이동하여 가설장비를 이용해 각 부재를 조립해서 부유체 구조를 완성하는 방법인 프리캐스트 부재 방법을 적용하는 것이 유리하다. 따라서, 연결부의 기능과 구조적 성능을 최대한으로 유지시킬 수 있는 적절한 연결기법을 적용해야 한다. 본 연구에서는 콘크리트 부유체 연결부의 강도특성연구를 수행하였다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.880-885
• /
• 2007

In the last decades, the resource used in the construction process has become much more various in kinds and increased in number as construction has become enlargement and complexity. Resource management on a construction site has been recognized as a detrimental factor to influence project success, therefore various technologies have been applied by the construction industry to streamline resource management. RFID/USN interworking system composed of RFID technology and sensor network supports automation of resource management and real-time information networking. Most of research efforts for RFID technology in the construction industry have been limited to object identification technology. The study proposed herein it to verify the applicability of RFID/USN interworking system to the construction industry. The identification rates of RFID/USN interworking system by distance and degree and by type of materials was identified and analyzed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.255-259
• /
• 2004

본 연구에서는 유류오염 토양현장샘플을 이용한 실험실 규모의 회분식 실험을 통해 다양한 환원조건하에서 BTEX와 MTBE의 자연정화 평가 및 현장 생복원 기술 적용 타당성을 검토하는데 있다. 첫째, 오염토양과 비오염 토양에서 충분한 전자수용체의 존재는 유류오염물질의 생분해능을 증가시킬 수 있었음 알았다. 둘째, 같은 토양이라도 전자수용체의 종류와 유류오염물질의 특성에 따른 생분해능의 다양성을 확인할 수 있었다. 셋째, BTEX에 비해 MTBE의 분해가 매우 느림을 확인하였다. 본 실험은 아직 초기 단계의 실험으로 현장 조건을 충분히 만족 시키지는 못한다. 추가적인 pH 변화에 따른 전자수용체의 이용 특성 및 토양-지하수 microcosm test, 혐기성 생분해 부산물인 $CO_2$, $N_2$ 또는 $N_2$O, TBA의 연구가 실시되어야 하겠다.

• Journal of the Korean Geophysical Society
• /
• v.3 no.4
• /
• pp.251-260
• /
• 2000

Applicabilities of two numerical methods, the 2-dimensional and the 3-dimensional method, are evaluated to inverse test results obtained from the underwater SASW(Spectral -Analysis-of-Surface-Waves) method. As a result of this study, it has been found that the 2-dimensional method can supposed to be applicable for the cases where stiffness of soil layer increases gradually with depth, and the stiffness is relatively low. For the other cases, however, it has been concluded that the 3-dimensional method needs to be applied to determine realistic theoretical dispersion curves. An example is also shown that in situ soil profile underwater is estimated from experimental dispersion curves using the 3-dimensional method. As a results, it can be concluded that the underwater SASW method can be effectively applied to explore the underwater soil condition.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.858-863
• /
• 2020

We experimented with the particle-settling velocity and CHCl3 absorption efficiency of seven activated-carbon and analyzed seven heavy metal contents by elution for application to the field treatment of sunken HNS on the marine seabed. The mean particle-settling velocity was in the range 0.5-8 cm/s, except when the 8-20 mesh was used. The larger the HNS particle, the faster the particle-settling velocity was, and the CHCl3 absorption efficiency increased considerably owing to the larger surface area. In addition, the elution test results showed that the total Zn and As contents in >100-meshed activated carbon was higher than the contents criteria for the standard for water-treatment agents, and Cr, Zn, and As were released at higher concentrations than those released by other activated-carbon groups. Taken together, the CHCl3 absorption efficiency, settling velocity, and elution test results suggested that the 20-60, 20-40, and 2mm&down mesh activated-carbon adsorbents could be applied to the field treatment of HNSs and that the minimum required amount for field treatment were 0.82, 0.90, and 1.28 ton/㎘, respectively, as calculated based on the HNS-adsorption-capacity priority.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.99-105
• /
• 2011

The Korean Government is promoting Korean Land Spatialization Program(KLSP) to commercialize and practice of the technology from 2006 to 2012. It is preparing for field test to make research achievements verified in Sejong City by selecting a test-bed area. It creates the conditions to be satisfied standards that can be recognized at internal and external. This paper proposes to design a test bed considering site conditions and various requirements for performance verification of Surveying Equipments in KLSP.

• IE interfaces
• /
• v.10 no.1
• /
• pp.95-107
• /
• 1997

본 논문은 실험계획법을 반도체 공정 및 소자 시뮬레이터에 적용하여, 시뮬레이션 회수를 최소화하고, 동시에 현장과 유사하게 시뮬레이터 내부 파라미터가 튜닝 될 수 있도록 하는 교정 문제에도 활용된 반도체 공정 최적화 사례를 소개한다. 또한, 일반적 시뮬레이터가 실제 현장과의 차이점으로 갖는 문제인 동일한 입력 값에 대해 항상 같은 출력 값이 산출되는 점을 공정의 규격을 고려해 시뮬레이션 함으로써 현장에서의 재현성을 높이고자 하였다. 이는 $0.8{\mu}m$급 BIMOS 공정의 기본 소자 중 하나의 NPN 트랜지스터의 전류이득(Current Gain : hFE) 특성을 최적화하기 위한 주요 공정조건 결정과 연관된 것이며, 기존 방법에 비해 시뮬레이션 횟수를 줄이는 동시에 현장에 직접 투입되는 검증 로트를 최소화시켜 비용과 시간을 절감할 수 있었다. 또한, 얻어진 추전 조건에서 실제 생산된 검증 로트를 통해 시뮬레이션으로부터 얻어진 결과들이 재현됨으로써 제시된 방법의 유용성을 확인하였다.