• Geotechnical Engineering
• /
• v.8 no.3
• /
• pp.23-36
• /
• 1992

The flat dilatometer(DMT) has been practically used as an in-situ test equipment. It is a simple, rapid and cost-effective tool to characterize the in-situ stress-strain-strength properties of various types of ground materials. However, the results of flat DMT should be validated with considerable data with respect to the known reference values for a specific site. In this study, the applicability of existing relationships which were established for other local deposits is verified by performing the tests in several clay deposits. To compare with the DMT results, field vane tests and cone penetration tests were also carried out in the same field as reference tests, and unconsolidated undrained tests, oedometer tests, and other fundamental material properties tests were conducted on the thin-walled tube samples in the laboratory. The results of the flat DMT combined with empirical correlations are used to estimate soil types, unit weights, coefficients of lateral earth pressure at rest, overconsolidation ratios, constrained moduli and undrained shear strengths of three clay local deposits. It was found that various geotechnical properties estimated from the flat DMT generally well agree with those from the reference tests.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.4
• /
• pp.5-15
• /
• 2016

For achieving stability and economic construction at a retaining wall construction site, quantitative parameters of soil properties with excavation steps coincides with the actual field site. The main parameters of retaining wall design such as deformation modulus and modulus of horizontal subgrade reaction are common with N value of standard penetration test. Therefore, this study is compared and analyzed about the mutual relationship which is SPT, PBT and PMT for overcoming inconsistency of the existing retaining wall design generalized. In addition, modulus of horizontal subgrade reaction and reduction factor with excavation steps are proposed through back analysis of elasto-plasticity and finite element method with actual field monitoring data. Finally, it is purpose that parameter errors are reduced for applying effective retaining wall design at a construction small and medium-sized.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.860-865
• /
• 2009

This thesis deals with application of Windows CE for Embedded System and the development methode of "Speed Gate Controller Tester" taking advantage of development program. We can improve reliability, stability and convenience of maintenance work as use of "Speed Gate Controller Tester" which was developed and applied "Embedded System" We can provide customers with more qualified service naturally because of the higher rate of operation which makes people use more pleasant and comfortable subway facility. And also it is possible to manage processor, time schedule and hardware resource as application of Embedded System and Windows CE. Embedded System applied OS Windows CE makes it possible to develop other various products, another application of equipment and tester. Thus this paper treats problems the moment developed and the present condition, development process, field application results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.4
• /
• pp.139-147
• /
• 2003

The most tunnel damage such as cracks or leakage which exist in tunnel lining commonly, is caused by the voids where exist behind the tunnel lining, through the tunnel safety inspections. These voids were analysed to affect to a stability of a running-tunnel seriously. The aim of this paper is to develope the lightweight foam concrete for tunnel backfilling material using stone-dust of cake state and to apply the lightweight foam concrete developed to the old tunnel. This paper shows the basic properties of lightweight foam concrete mixed with stone-dust including flow rate, unit volume weight, absorption rate and compressive strength. In addition, according to the designed compound ratio, the lightweight foam concrete was applied to the ASSM tunnel for an application assessment. The engineering application of the lightweight foam concrete as the old tunnel's backfilling material was confirmed in this assessment.

• Explosives and Blasting
• /
• v.22 no.2
• /
• pp.1-11
• /
• 2004

일반적으로 국내 석회석 광산에서의 발파는 20ms나 25ms 시차를 가지는 지발발파로 시행되어지고 있다. 국외에서는 전자뇌관을 사용하여 암반의 지질학적인 특성에 따라 지발 시차를 사용자의 현장에 따라 선정하여, 주변 보안 물건에 따른 진동 및 소음을 경감하면서, 1회 발파의 생산량을 증대할 수 있으며, 2차 파쇄 비용 및 적재비용을 절감하는 최적의 시차를 적용하여 발파 규모를 줄이지 않는 발파패턴을 적용하고 있다. 본 연구는 해외에서 사용되고 있는 전자뇌관을 국내 현장 석회석 광산(단양)에 적용함으로 최적지연시차를 찾아내는 방법과 초시의 오차에 따른 문제점과 향후 국내 적용성을 판단하고자 하였다. 대규모 석회석 광산을 대상으로 최적시차를 판단하고자 동일 패턴에서 시차를 6ms ~ 30ms로 시험발파를 시행하여 4가지 요소 발파진동속도, 주 주파수특성, 파쇄입도, 암석 이동 및 버력의 상태를 분석하여 각 시차에 따른 배점을 두어, 당 현장에 요구되는 개별 가중치를 선정하여 분석하였다. 분석 결과 당 현장에서의 발파결과에 따른 요소별 가중치를 발파진동속도(20), 주 주파수 특성(20), 파쇄입도(40), 암석 이동(10) 및 버력의 상태(10)로 하여 분석한 결과 15ms가 최적시차로 나타냈다. 향후 각 현장에 적합한 요소별 가중치를 선정하여 현장별 최적시차를 도출한다면 최적의 발파효과를 있을 것으로 판단된다.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.267-275
• /
• 1996

금속과 같은 균질한 재료의 균열파괴의 특성을 설명하기 위하여 도입된 파괴역학의 이론들은 1960년대 이후 콘크리트나 암석 등에 대하여 적용되기 시작하였다. 파괴인성계수(fracture toughness)는 균열의 성장에 대한 재료의 저항을 나타낸다. 그러나, 암석의 파괴역학적 특성은 암석이 갖는 불균질성이나 비등방성에 의하여 영향을 받는다. 즉, 암석의 파괴역학적 특성의 측정은 시험편의 크기나 초기균열의 길이, 시험편의 형상 등에 의하여 측정자료의 분산이 심하며 따라서 다른 기본 물성들의 경우에서와 마찬가지로 일정한 시험기준의 도입이 요구되었다. 1988년에 국제암반공학회(ISRM)에서 제시한 표준시험방법은 시험편의 제작이나 시험방법에 있어서 복잡한 과정을 요구하고 있다. 본 논문에서는 표준시험방법에서 사용되는 시험편의 형태에 비하여 비교적 간단한 시험방법들에 의하여 얻어진 파괴적인성계수들을 서로 비교하여 제시하고 시험편의 크기와 기타 시험조건에 따른 파괴인성계수 측정치의 변화를 나타내고 있다. 또한, 암석에 포함되어있는 자연균열들의 특성과 파괴역학실험 중 유발되는 인공균열들의 형태를 비교하여 실험실에서 얻은 파괴역학적 계수들의 현장적용에 대한 문제점들을 지적하고 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.87-95
• /
• 2021

In this study, seven companies(A~G) designated as new construction technology selected and evaluated KS F 2622: Method of test for performance evaluation of membrane roofing systems that are similar to field application conditions. As a result of the test, it was confirmed that although all test specimens exceeded KS standards in the basic physical, it was difficult to obtain field quality performance in weak areas such as joints and vertical parts of the adhesive coating method in water-tightness, sagging resistance, swelling resistance tests except for fatigue(crack behavior) tests.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.361-375
• /
• 2015

An energy pile is one of the novel ground heat exchangers (GHEX's) that is a economical alternative to the conventional closed-loop vertical GHEX. The combined system of both a structural foundation and a GHEX contains a heat exchange pipe inside the pile foundation and allows a working fluid circulating through the pipe, inducing heat exchange with the ground formation. In this paper, a group of energy piles equipped with parallel U-type (5, 8 and 10 pairs) heat exchange pipes was constructed in a test-bed by fabricating in large-diameter cast-in-place concrete piles. In addition, a closed-loop vertical GHEX with 30m depth was constructed nearby to conduct in-situ thermal response tests (TRTs) and to compare with the thermal performance of the cast-in-place energy piles. A series of thermal performance tests was carried out with application of an artificial cooling and heating load to evaluate the heat exchange rate of energy piles. The applicability of cast-in-place energy piles was evaluated by comparing the relative heat exchange efficiency and heat exchange rate with preceding studies. Finally, it is concluded that the cast-in-place energy piles constructed in the test-bed demonstrate effective and stable thermal performance compared with the other types of GHEX.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.203-210
• /
• 2003

격자망식 전선배치에 의한 전기비저항 측정기법을 이용한 침출수 누출감지시스템을 개발하여 그 적용성을 평가하기 위하여 현장모형시험을 수행하였다. 현장모형시험을 수행한 결과 침출수 누출지점에서 전기비저항이 크게 감소하여 누출지점을 정확하게 감지할 수 있었다. 격자망식 전선배치에 의한 전기회로적인 효과로 인하여 전기비저항이 감소된 지점과 동일 전선상에 연결된 다른 센서에서의 측정값도 다소 감소하는 경향을 나타내었다. 이를 보정하기 위하여 P-SPICE를 이용하여 전기회로 시뮬레이션을 수행하여 전기회로 효과를 정량적으로 평가하였다 P-SPICE 시뮬레이션의 결과를 토대로 보정계수를 도출하여 현장모형시험결과를 보정하였으며, 보정된 겉과에 의하면 전기회로적 특성에 의한 영향을 효과적으로 제거되어 누출지점에서의 전기비저항 감소가 명확하게 나타났다.

• Tunnel and Underground Space
• /
• v.14 no.2
• /
• pp.97-107
• /
• 2004

Various kinds of rock mass properties, which can be obtained from laboratory tests as well as field tests, can be reasonably applied to the design of earth structures. An extrapolation technique can be used for this application and it generally guarantee its quality from a sufficient amount of test results because it is based on the RMR value in most cases. When the confident RMR can not be obtained because of the insufficient testing results, the Monte Carlo Simulation technique can be introduced fer deducing the proper RMR and this assessed RMR can be reused fur the major input parameters. Authors' proposed method can be verified from the comparison between the results of numerical analysis and the evidences of field site.