• Title/Summary/Keyword: 현상

Search Result 34,554, Processing Time 0.069 seconds

Effects of Wood Particles and Steel Wire Compositions on Physical and Mechanical Properties of the Boards (목재(木材)파아티클과 철선(鐵線) 복합체(複合體)가 보오드의 물리적(物理的) 및 기계적(機械的) 성질(性質)에 미치는 영향(影響))

  • Park, Heon;Lee, Pill-Woo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.14 no.1
    • /
    • pp.3-44
    • /
    • 1986
  • In order to obtain the basic physical and mechanical properties of steel wire reinforced particleboard, particleboards were formed with large particles through 2.11 mm (12 meshes) and retained on 1.27mm (20 meshes) sieves and small particles through 1.27mm (20 meshes) and retained on 0.42mm (60 meshes) sieves from the plywood mill wastes of meranti (Shorea spp.) in the form of pallmanchips, applying urea-formaldehyde resin as an adhesive on the particle surface in 10 percent on the oven dried weight of particles, and arranging steel wires of 1mm in diameter 5,10,15,20, and 25mm in longitudinal and transverse direction with crossing in the mid of the board depth in single layer boards, 10mm in longitudinal or transverse direction without crossing in two layers and 10mm in longitudinal and transverse directions with and without crossing in three steel wire layers boards. The stepwise 9-minutes-multi-pressing schedule in 5 minutes at 35 kgf/$cm^2$, 2.5 minutes at 25 kgf/$cm^2$. and 1.5 minutes at 15 kgf/$cm^2$ was applied for $300{\times}200{\times}13$mm board at the temperature of 160$^{\circ}C$ in a hot press. Specific gravity, thickness swelling, bending properties of modulus of rupture (MOR), modulus of elasticity(MOE), work to proportional limit, and work to ultimate load, internal bond (IB), and screw holding power(SHP) of the reinforced boards were analyzed on the wire openings and wire layers. The results obtained are summarized as follows; 1) In specific gravity, particleboards with large particles and small particles had higher value with more steel wire placements and more steel layers composition, 2) Particleboards with large particles in accordance with more steel wire liners composition gave very poor thickness swelling. 3) The mechanical properties of particleboards formed with large or small particles were reinforced with more steel wire layers. Therefore, bending strength was improved in modulus of rupture, modulus of elasticity, and work to ultimate load. Especiallv, particleboards with two or three steel wire layers showed the tension lamination effect when the steels in lower steel wire layer were oriented parallel to the board length. 4) The modulus of rupture, modulus of elasticity, and work to ultimate load in bending varied with opening area, distance of lengthwise wires multipled by distance of transverse wires. Particleboards formed with large particles resulted in higher value in modulus of rupture with 1.5-3 $cm^2$ opening area, 1-2cm distance between transverse wires, and 1.5-2.5cm distance between lengthwise wires. Particle boards formed with small particles showed higher value with 0.5-1.5$cm^2$ or 3.75-6.25 $cm^2$ opening area, 0.5 or 2.5cm distance between transverse wires. 5) In modulus of elasticity, particleboards formed with large particles with one steel wire layer suggested higher value with 5-3$cm^2$ opening area, 1-2.5cm distance between transverse wires and also 1-2.5 cm distance between lengthwise wires. Particleboards formed with small particles showed higher value with 0.75-1.25$cm^2$ or 3-6.25$cm^2$ opening area and 0.5 or 2.5cm distance between transverse wires. 6) Particleboards formed with large particles gaved higher value in work to ultimate load with 1-3$cm^2$ opening area. Particleboards formed with small particles showed increasing tendancy with decreasing opening area. 7) In internal bond and screw holding power, particleboards formed with large particles had increasing value in two and three steel wire layers compositions, but particleboards formed with small particles showed no difference. Particleboards formed with large particles containing one steel wire layer showed no difference in internal bond and screw holding power, and particleboards formed with small panicles containing one steel wire layer resulted in increasing value in internal bond and decreasing value in screw holding power in accordance with increase in opening area.

  • PDF

The Respiratory and Hemodynamic Effects of Prone Position According to the Level of PEEP in a Dog Acute Lung Injury Model (잡종견 급성폐손상 모델에서 Prone position 시행시 PEEP 수준에 따른 호흡 및 혈류역학적 효과)

  • Lim, Chae-Man;Chin, Jae-Yong;Koh, Youn-Suck;Shim, Tae-Sun;Lee, Sang-Do;Kim, Woo-Sung;Kim, Dong-Soon;Kim, Won-Dong
    • Tuberculosis and Respiratory Diseases
    • /
    • v.45 no.1
    • /
    • pp.140-152
    • /
    • 1998
  • Background: Prone position improves oxygenation in patients with ARDS probably by reducing shunt Reduction of shunt in prone position is thought to be effected by lowering of the critical opening pressure (COP) of the dorsal lung because the pleural pressure becomes less positive in prone position compared to supine position. It can then be assumed that prone position would bring about greater improvement in oxygenation when PEEP applied in supine position is just beneath COP than when PEEP is above COP. Hemodynamically, prone position is expected to attenuate the lifting of cardiac fossa induced by PEEP. Based on these backgrounds, we investigated whether the effect of prone position on oxygenation differs in magnitude according to the level of PEEP applied in supine position, and whether impaired cardiac output in supine position by PEEP can be restored in prone position. Methods: In seven mongrel dogs, $PaO_2/F_1O_2$(P/F) was measured in supine position and at prone position 30 min. Cardiac output (CO), stroke volume (SV), pulse rate (PR), and pulmonary artery occlusion pressure (PAOP) were measured in supine position, at prone position 5 min, and at prone position 30 min. After ARDS was established with warmed saline lavage(P/F ratio $134{\pm}72$ mm Hg), inflection point was measured by constant flow method($6.6{\pm}1.4cm$ $H_2O$), and the above variables were measured in supine and prone positions under the application of Low PEEP($5.0{\pm}1.2cm$ $H_2O$), and Optimal PEEP($9.0{\pm}1.2cm$ $H_2O$)(2 cm $H_2O$ below and above the inflection point, respectively) consecutively. Results : P/F ratio in supine position was $195{\pm}112$ mm Hg at Low PEEP and $466{\pm}63$ mm Hg at Optimal PEEP(p=0.003). Net increase of P/F ratio at prone position 30 min, however, was far greater at Low PEEP($205{\pm}90$ mm Hg) than at Optimal PEEP($33{\pm}33$ mm Hg)(p=0.009). Compared to CO in supine position at Optimal PEEP($2.4{\pm}0.5$ L/min), CO in prone improved to $3.4{\pm}0.6$ L/min at prone position 5 min (p=0.0180) and $3.6{\pm}0.7$ L/min at prone position 30 min (p=0.0180). Improvement in CO was attributable to the increase in SV: $14{\pm}2$ ml in supine position, $20{\pm}2$ ml at prone position 5 min (p=0.0180), and $21{\pm}2$ ml at prone position 30 min (p=0.0180), but not to change in PR or PAOP. When the dogs were turned to supine position again, MAP ($92{\pm}23$ mm Hg, p=0.009), CO ($2.4{\pm}0.5$ L/min, p=0.0277) and SV ($14{\pm}1$ ml, p=0.0277) were all decreased compared to prone position 30 min. Conclusion: Prone position in a dog with saline-lavaged acute lung injury appeared to augment the effect of relatively low PEEP on oxygenation, and also attenuate the adverse hemodynamic effect of relatively high PEEP. These findings suggest that a PEEP lower than Optimal PEEP can be adopted in prone position to achieve the goal of alveolar recruitment in ARDS avoiding the hemodynamic complications of a higher PEEP at the same time.

  • PDF

Morbidity Pattern and Medical Care Utilization Behavior of Residents in Urban Poor Area (도시 영세지역 주민의 상병양상과 의료이용행태)

  • Kang, Pock-Soo;Lee, Kyeong-Soo;Kim, Chang-Yoon;Kim, Seok-Beom;SaKong, Jun;Chung, Jong-Hak
    • Journal of Yeungnam Medical Science
    • /
    • v.8 no.1
    • /
    • pp.107-126
    • /
    • 1991
  • The purpose of the study was to assess the morbidity pattern and the medical care utilization behavior of the urban residents in the poor area. The study population included 2,591 family members of 677 households in the poor area of Daemyong 8 Dong, Nam-Gu, Taegu and 2,686 family members of 688 households, near the poor area in the same Dong, were interviewed as a control group. On this study the household interview method was applied. Well-trained interviewers visited every household in the designated area and individually interviewed heads of households or housewives for general information, morbidity condition, and medical care utilization with a structured questionnaire. Individuals were interviewed from 1 to 30 December 1988. The major results were summarized as follows : The proportion of the people below 5 years of age was 4.2% of the total study population and 5.5% were above 65 years of age in the poor area. This was slightly higher than in the control area. The average monthly income of a household in the poor area was 403,000 won versus 529,000 won in the control area. Fifty-eight percent of the residents in the poor area and sixty-one percent in the control area were medical security beneficiaries, but the proportion of medical aid beneficiaries was 7.8% in the poor area and 4.6% in the control area. The 15-day period morbidity rate of acute illnesses was 57.1 per 1,000 in the poor area and 24.2 per 1,000 in the control area. Respiratory disease is the most common acute illness in both areas. The most frequently utilized medical facility was the pharmacy among the patients with acute illnesses in the poor area. Among them 58.1% visited pharmacy initially while 38.4% of the patients in the control area visited a clinic. Among persons with illnesses during the 15 days 8.8% in the poor area and 4.6% in the control area did not seek any medical facility. Mean duration of utilization of medical facilities was 3.5 days in the poor area and 3.3 days in the control area. Initially of the medical facilities in Daemyong 8 Dong, The pharmacy in the poor area and the clinic in the control area were most commonly utilized. The most common reason for visiting the hospital was 'regular customers' in the poor area and 'geographical accessibility' in the control area. The one year period morbidity rate of chronic illness in the poor area was 83.0 per 1,000 population and 28.0 per 1,000 in the control area. Disease of nervous system was the most common chronic illness in the poor area while cardiovascular disease in male and gastrointestinal disease in female were most prevalent in the control area. The most frequently utilized medical facility was the pharmacy among the patients with chronic illnesses in the poor area. Among them 24.2% visited the pharmacy initially while 34.7% of the patients in the control area visited the out-patient department of the hospital within a 15-day period. Among the patients with chronic illnesses 34.9% in the poor area and 16.0% in the control area did not seek any medical facility. Mean duration of utilization of medical facilities was 9.2 days in the poor area and 9.9 days in the control area within a 15-day period. Initially of the medical facilities in Daemyong 8 Dong, the pharmacy in the poor area and the hospital in the control area were most commonly utilized. The most common reason for visiting the hospital, clinic, health center or pharmacy in the poor area was 'geographical accessibility' while the reason for visiting herb clinic was 'good result' and 'reputation' in both areas.

  • PDF

Studies on Growth Stimulation of Lactic Starter (유산균(乳酸菌) Starter의 생육촉진(生育促進)에 관(關)한 연구(硏究))

  • Kim, Jong Woo;Lee, Young Soo
    • Korean Journal of Agricultural Science
    • /
    • v.19 no.1
    • /
    • pp.40-50
    • /
    • 1992
  • This experiment was carried out to stimulate lactic starter culture for yoghurt manufacturing. A each of 1.5% of Bios 2000, CR starter medium, and Yeast extract were added to bulk medium, acidity, pH and changes in the number of lactic acid bacteria were investigated at, intervals of two hours for Lactobacillus bulgaricus and four hours for Streptococus thermophilus and Lactobacillus casei. The results obtained were summarized as follows. 1. The acidity of control arrived at 0.99% after 16 hours of incubation during the incubation of Lactobacillus bulgaricus. Whereas that of CR starter medium reached 1.00% at 12 hours of incubation. Yeast extract, 1.12% at 12 hours, and Bios 2000 reached 0.97% at 10 hours respectively, Thus, Bios 2000 showed the fastest rate of acid production. 2. When the acidity of experiment medium peaked on optimum levels. pH of control was 4.03 in 16 hours of incubation during the incubation of Lactobacillus bulgaricus. Whereas that of Bios 2000 reached 4.10 of Yeast extract reached 3.97 at 12 hours, and of CR starter medium reached 4.05 at 12 hours. 3. Lactic acid bacterial counts were $3.1{\times}10^{10}/ml$ after 16 hours of incubation during the incubation of lactobacillus bulgaricus, Whereas those of Bios 2000 reached $2.1{\times}10^{10}/ml$ at 10 hours, with the fastest stimulation of growth, The counts in CR starter medium were at $2.9{\times}10^{10}/ml$ at 12 hours, and Yeast extract were $3.8{\times}10^{10}/ml$ at 12 hours. 4. The acidity of control, CR starter medium, and Yeast extract reached 0.92% at 44 hours, and 0.96% at 32 hours, and 0.90% at 32 hours respectively, Also, that of Bios 2,000 reached 0.97% at 32 hours, which exhibited the highest, among the treatments. 5. The pH of control was 4.27 at 44 hours. that of CR starter medium was 4.33 at 40 hours and that of Yeast extract was 4.25 at 32 hours during the incubation in Streptococcus thermophilus. Besides, pH of Bios 2000 is lowest as 4.18 at 32 hours. 6. Lactic acid bacterial counts in control, CR starter medium, and Yeast extract during the incubation of Streptococcus thermophilus were $9.8{\times}10^{9}/ml$ at 44 hours,$9.5{\times}10^{8}/ml$ at 40 hours, and $9.6{\times}10^{8}/ml$ at 32 hours. And, the highest number was $2.0{\times}10^{9}/ml$ for Bios 2000 at 32 hours. 7. The acidity of control during the incubation of Lactobacillus casei reached 0.92% at 40 hours, and those of CR starter medium and Yeast extract were 0.95% at 40 hours, and 1.01% at 36 hours respectively. Also, Bios 2000 had the highest acidity as 0.94% at 32 hours. 8. The pH of control, CR starter medium and Yeast extract during the incubation Lactobacillus casei was 4.27 at 40 hours. 4.21 at 40 hours, and 4.15 at 36 hours respectively. Also, Bios 2000 showed the lowest pH, as 4.23, at 32 hours. 9. Lactic acid bacterial counts in control, CR starter medium and Yeast extract during the incubation of Lactobacillus casei were $9.4{\times}10^{7}/ml$ at 40 hours, $1.1{\times}10^{8}/ml$ at 40 hours, and $5.0{\times}10^{8}/ml$ at 36 hours respectively. And, the progress of 32 hours showed the highest number of lactic acid bacteria as$6.4{\times}10^{8}/ml$ in Bios 2000.

  • PDF

Analysis of p53 and Retinoblasoma(Rb) Gene Polymorphisms in Relation to Lung Cancer in Koreans (한국인 폐암 환자에 대한 p53 및 Rb유전자의 다형성 분석)

  • Lee, Kyung-Sang;Sohn, Jang-Won;Yang, Suck-Chul;Yoon, Ho-Joo;Shin, Dong-Ho;Park, Sung-Soo;Lee, Jung-Hee;Lee, Chun-Geun;Cho, Youl-Hee
    • Tuberculosis and Respiratory Diseases
    • /
    • v.44 no.3
    • /
    • pp.534-546
    • /
    • 1997
  • Background : The p53 and retinoblastoma(Rb) tumor suppressor genes are associated with the pathogenesis of several types of human cancer. Substantial proportion of the primary lung cancers or cell lines have been reported to have the p53 and/or the Rb gene mutations. But, so far there is no report on the analysis of the Rb gene polymorphism as one of the genetic susceptibility marker. This study was undertaken to establish the gene frequencies of the polymorphic genotypes of the p53 and Rb genes in Koreans to evaluate the possible involvement of these genotypes as a risk factor of lung cancer. Methods : In this study 145 controls without previous and present tumor history and 128 lung cancer patients were subjected to analysis. The two intragenic polymorphisms of the p53 gene(exon 4/ AccII, intron 6/MspI) and one intron 17/XbaI polymorphism of the Rb gene were analysed by the method of polymersae chain reaction- restriction fragment length polymorphisms(PCR-RFLPs). The genotype of the intron 3/16 bp repeat polymorphism of p53 was determined by PCR and direct gel electrophoresis. Results : There were no significant differences in the genotype distributions of the p53 gene between lung cancer patients and controls. But heterozygotes(Arg/Pro) of the exon 4/AccII polymorphisms were slightly over-represented than controls, especially in the Kreyberg type I cancer, which was known to be associated with smoking. The intron 3/16 bp duplication and the intron 6/MspI polymorphisms were in complete linkage disequilibrium. About 95% of the individuals were homozygotes of the common alleles both in the 16 duplication and MspI polymorphisms, and no differences were deteced in the genotype distributions between lung cancer patients and controls. Overall genotype distributions of the Rb gene polymorphisms between lung cancer patients and controls were not significantly different However, the genotype distributions in the Kreyberg type I cancer were significantly different from those of controls(p = 0.0297) or adenocarcinomas(p = 0.0008). It was noticeable that 73.4% of the patients with adenocarcinomas were heterozygotes(r1/r2) whereas 39.2% of the Kreyberg type I cancer were heterozygous at this polymorphisms. In the lung cancer patients, significant differences were also noted between the high dose smokers and low dose smokers including non-smokers(p = 0.0258). The relative risk to Kreyberg type I cancer was significantly reduced in the individuals with the genotype of r1/r2(odds ratio = 0.46, 95% C.I. = 0.25-0.86, p = 0.0124). The combined genotype distribution of the exon 4 AccII of the p53 and the intron 17 Rb gene polymorphisms in Kreyberg type I cancers were significantly different from dose of controls or adenocarcinomas. The highest odds ratio were observed in the individuals with the genotypes of Arg/Pro and r2/r2(odds ratio = 1.97,95% C.I. = 0.84-4.59) and lowest one was in the patients with Arg/Arg, r1/r2 genotype(odds ratio = 0.54, 95% C.I. = 0.25-1.14). Conclusion : The p53 and the Rb gene polymorphisms modulate the risk of smoking induced lung cancer development in Koeans. However, the exact mechanism of risk modulation by these polymorphism remains to be determined. For more discrete clarification of associations between specific genotypes and lung cancer risk, the evaluations of these polymorphisms in other ethnics and more number of patients will be needed.

  • PDF

Spatial Distribution of Aging District in Taejeon Metropolitan City (대전광역시 노령화 지구의 공간적 분포 패턴)

  • Jeong, Hwan-Yeong;Ko, Sang-Im
    • Journal of the Korean association of regional geographers
    • /
    • v.6 no.2
    • /
    • pp.1-19
    • /
    • 2000
  • This study is to investigate and analyze regional patterns of aging in Taejeon Metropolitan city-the overpopulated area of Choong-Cheong Province-by cohort analysis method. According to the population structure transition caused by rapid social and economic changes, Korea has made a rapid progress in population aging since 1970. This trend is so rapid that we should prepare for and cope with aging society. It is not only slow to cope with it in our society, but also there are few studies on population aging of the geographical field in Korea. The data of this study are the reports of Population and Housing Censuses in 1975 and 1985 and General Population and Housing Censuses with 10% sample survey in 1995 taken by National Statistical Office. The research method is to sample as the aging district the area with high aged population rate where the populations over 60 reside among total population during the years of 1975, 1985, 1995 and to sample the special districts of decreasing population where the population decreases very much and the special districts of increasing population in which the population increases greatly, presuming that the reason why aged population rate increases is that non-elderly population high in mobility moves out. It is then verified and ascertained whether it is true or not with cohort analysis method by age. Finally regional patterns in the city are found through the classification and modeling by type based on the aging district, the special districts of decreasing population, and the special districts of increasing population. The characteristics of the regional patterns show that there is social population transition and that non-elderly population moves out. The aging district with the high aged population rate is divided into high-level keeping-up type, relative falling type below the average of Taejeon city in aging progress, and relative rising type above the average of the city. This district can be found at both the central area of the city and the suburbs because Taejeon city has the characteristic of over-bounded city. But it cannot be found at the new built-up area with the in-migration of large population. The special districts of decreasing population where the population continues to decrease can be said to be the population doughnuts found at the CBD and its neighboring inner area. On the other hand, the special districts of increasing population where the population continues to increase are located at the new built-up area of the northern part in Taejeon city. The special districts of decreasing population are overlapping with the aging district and higher in aged population rate by the out-migration of non-elderly population. The special districts of increasing population are not overlapping with the aging district and lower in aged population rate by the in-migration of non-elderly population. To clarify the distribution map of the aging district, the special districts of decreasing and increasing population and the aging district are divided into four groups such as the special districts of decreasing population group-the same one as the aging district, the special districts of decreasing population group, the special districts of increasing population group, and the other district. With the cohort analysis method by age used to investigate the definite increase and decrease of aging population through population transition of each group, it is found that the progress of population aging is closely related to the social population fluctuation, especially that aged population rate is higher with the out-migration of non-elderly population. This is to explain each model of CBD, inner area, and the suburbs after modeling the aging district, the special districts of decreasing population, and the special districts of increasing population in Taejeon city. On the assumption that the city area is a concentric circle, it is possible to divide it into three areas such as CBD(A), the inner area(B), and the suburbs(C). The special districts of increasing and decreasing population in the city are divided into three districts-the special districts of decreasing population(a), the special districts of increasing population(b), and the others(c). The aging district of this city is divided into the aging district($\alpha$) and the others($\beta$). And then modeling these districts, it is probable to find regional patterns in the city. $Aa{\alpha}$ and $Ac{\beta}$ patterns are found in the CBD, in which $Aa{\alpha}$ is the special district of decreasing population and is higher in aged population rate because of aged population low in mobility staying behind and out-migration of non-elderly population. $Ba{\alpha}$, $Ba{\beta}$, $Bb{\beta}$, and $Bc{\beta}$ patterns are found in the inner area, in which neighboring area $Ba{\alpha}$ pattern is located. $Bb{\beta}$ pattern is located at the new developing area of newly built apartment complex. $Cb{\beta}$, $Cc{\alpha}$, and $Cc{\beta}$ patterns are found in the suburbs, among which $Cc{\alpha}$ pattern is highest in population aging. It is likely that the $Cc{\beta}$ under housing land readjustment on a large scale will be the $Cb{\beta}$ pattern. As analyzed above, marriage and out-migration of new family, non-elderly population, with house purchase are main factors in accelerating population aging in the central area of the city. Population aging is responsible for the great increase of aged population with longer life expectancy by the low death rate, the out-migration of non-elderly population, and the age group of new aged population in the suburbs. It is necessary to investigate and analyze the regional patterns of population aging at the time when population problems caused by aging as well as longer life expectancy are now on the increase. I hope that this will help the future study on population aging of the geographical field in Korea. As in the future population aging will be a major problem in our society, local autonomy should make a plan for the problem to the extent that population aging progresses by regional groups and inevitably prepare for it.

  • PDF

GENERAL STRATIGRAPHY OF KOREA (한반도층서개요(韓半島層序槪要))

  • Chang, Ki Hong
    • Economic and Environmental Geology
    • /
    • v.8 no.2
    • /
    • pp.73-87
    • /
    • 1975
  • Regional unconformities have been used as boundaries of major stratigraphic units in Korea. The term "synthem" has already been propsed for formal unconformity-bounded stratigraphic units of maximum magnitude (ISSC, 1974). The unconformity-based classification of the strata in the cratonic area in Korea comprises in ascending order the Kyerim, $Sangw{\check{o}}n$, $Jos{\check{o}}n$, $Py{\check{o}}ngan$, Daedong, and $Ky{\check{o}}ngsang$ Synthems, and the Cenozoic Erathem. The unconformites separating them from each other are either orogenic or epeirogenic (and vertical tectonic). The sub-$Sangw{\check{o}}n$ unconformity is a non-conformity above the basement complex in Korea. The unconformities between the $Sangw{\check{o}}n$, $Jos{\check{o}}n$, and $Py{\check{o}}ngan$ Synthems are disconformities denoting late Precambrian and Paleozoic crustal quiescence in Korea. The unconformities between the $Py{\check{o}}ngan$, Daedong, and $Ky{\check{o}}ngsang$ Synthems are angular unconformities representing Mesozoic orogenies. The bounding unconformities of the $Ky{\check{o}}ngsang$ Synthem involve non-conformable parts overlying the Jurassic and late Cretaceous granitic rocks.

  • PDF

Ecological Characteristics of Leading Shoot Elongation in the Plantation (I) (조림목(造林木) 신초생장(新稍生長)의 생태학적특성(生態學的特性)에 관(關)한 연구(硏究) (I))

  • Ma, Sang Kyu;Kuk, Ung Hum
    • Journal of Korean Society of Forest Science
    • /
    • v.47 no.1
    • /
    • pp.37-43
    • /
    • 1980
  • This study have done to get the basical information that would be useful to make the ecological planting, selection of suitable species and weeding plan by the relation between the leading shoot elongation of several species and the climatic factors in the plantation. Sampling measurement have been done in the trial forest of Korean German Forest Management Project located in Joil-ri, Samnam-myeon and Ichcon-ri, Sangbug-myeon, Ulju-gun. The former is in lowland at 100m latidude and the latter is in highland of 600 m latitude. The elongation of leading shoot has been measured in the plantation with 10 days interval from the beginning of March in 1979 and the climatic datas has gotten in the weather station closed to the plantation. 1. The change of air temperature and rainfall in each measuring site is like Fig 1. and 2. The similar temperature in 600 m high latitude is coming about 10 days latter than 100 m latitude. 2. Genus pine as Pinus thunbergii, P. rigida, P. rigitaeda. P. koraiensis and P. taeda begin their leading shoot growth during March and air temperature in that time is around $6^{\circ}C$. In highland their beginning of leading shoot elongation has been found out 10 days latter than lowland. However Abies, Larix and Picea has shown to open their leading shoot during May, 40 days late in comparing with genus pine, and then temperature is making around $15^{\circ}C$. But Cryptomeria, Chamaecyparis and Cedrus deodora has shown their leading shoot opening in March in lowland and May in high land. The reason of late opening, specially in highland, seems to be the influence of winter frost. 3. Most of leading shoot elongation of genus pine has finished during the end 10 days of April and May under range of air temperate $10^{\circ}C$ and $20^{\circ}C$ and other species has finished most of their elongation during the end 10 days of May and June with air temperature range of $18^{\circ}C$ to $20^{\circ}C$. So the suitable season of weeding works show to genus pine in May and other species in June. 4. The leading shoot growth of genus pine has started earlier and closed earlier too than other species and, when over than $20^{\circ}C$ air temperature, their growth is decreasing quickly. Pices abies as well show to be decreased suddenly in over than $20^{\circ}C$ temperature. Other species show the similar trend when over than $22^{\circ}C$. This reason is considered as high temperature of summer season. 5. Annual elongated days of leading shoot of Picea abies is 50 days, Abies hollophylla 70 days, and more than 85 percentage of shoot growth of Pinus koraiensis and Larix leptolepsis are growing during 70 dys as well. The shoot growing days of Chamaecyparis, P. rigida, P. rigitaeda, P. taeda and P. shunbergii show longer period as over than 120 days. 6. The shoot elongation times per year of Abies and Picea has closed as one times and Genus pine is continuring their elongation more than two times. But Cryptomeria, Chamaecyparis, Cedrus deodora and Larix show one or two times elongation depending on the measuring site. The reason of continuring elongation more than than two times seems to be influenced by the temperature in summer season except the genetical reason. 7. Depending on the above results, as the high temperature in summer season could give the influence to grow the leading shoot in the plantation, this would be the considering point on the ecological planting and selection of the suitable species to the slope aspect. The elongation pattern by the season show to be the considering point too to decide the the weeding and fertilizer dressing time by the species.

  • PDF

Evaluation for Rock Cleavage Using Distributional Characteristics of Microcracks and Brazilian Tensile Strengths (미세균열과 압열인장강도의 분포 특성을 이용한 결의 평가)

  • Park, Deok-Won
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.33 no.2
    • /
    • pp.99-114
    • /
    • 2020
  • The characteristics of the Brazilian tensile strengths(σt) parallel to the rock cleavages in Jurassic granite from Geochang were analysed. The evaluation for the six directions of rock cleavages was performed using the parameter values on microcrack length and the above strength. The strength values of the five test specimens belonging to each direction were classified into five groups. The strength values of these five groups increase in order of group A < B < C < D < E. The close dependence between the above microcrack and strength was derived. The analysis results of this study are summarized as follows. First, the chart showing the variation and characteristics of strength among the three rock cleavages were made. In the above chart, the strength values of six directions belonging to each group were arranged in order of rift(R1 and R2), grain(G1 and G2) and hardway(H1 and H2). The strength distribution lines of the five groups concentrate in the direction of R1. And the widths among the above five lines indicating strength difference(Δσt) are the most narrowest in R1 direction. From the related chart, the variation characteristics among the two directions forming each rock cleavage were derived. G2(2)-test specimen shows higher value and lower value of the difference in strength compared to the case of G1(1)-test specimen. These kinds of phenomena are the same as the case between the test specimen H2(2) and H1(1). The strength characteristics of the above test specimens (2) suggest lower microcrack density value and higher degree of uniformity in the distribution of microcracks arrayed parallel to the loading direction compared to those of test specimens (1). The six strength values belonging to each group were arranged in increasing order in the above chart. The strength values of the test specimens belonging to both group D and E appear in order of R1 < R2 < G1 < H1 < G2 < H2. Therefore, the strength values of group D and E can be indicator values for evaluating the six directions of rock cleavages. Second, the correlation chart between slope angle(θ) and strength difference(Δσt) were made. The values of the above two parameters were obtained from the five strength distribution lines connecting between the two directions. From the chart related to rift plane(G1-H1, R'), grain plane(R1-H2, G') and hardway plane(R2-G2, H'), the slope values of linear functions increase in order of R'(0.391) < G'(0.470) < H'(0.485). Among three planes, the charts related to hardway plane show the highest distribution density among the five groups. From the related chart for rift(R1-R2, R), grain(G1-G2, G) and hardway(H1-H2, H), the slope values of linear functions increase in order of rift(0.407) < hardway(0.453) < grain(0.460). Among three rock cleavages, the charts related to rift show the highest frequency of groups belonging to the lower region. Taken together, the width of distribution of the slope angle among the three planes and three rock cleavages increase in order of H' < G < R' < R < G' < H. Third, the correlation analysis among the parameters related to microcrack length and the tensile strengths was performed. These parameters may include frequency(N), total length(Lt), mean length(Lm), median length(Lmed) and density(ρ). The correlation charts among individual parameters on the above microcrack(X) and corresponding five levels of tensile strengths for the five groups(Y) were made. From the five kinds of correlation charts, the values of correlation coefficients(R2) increase along with the five levels of strengths. The mean values of the five correlation coefficients from each chart increase in order of 0.22(N) < 0.34(Lt) < 0.38(ρ) < 0.57(Lmed) < 0.58(Lm). Fourth, the correlation chart among the corresponding maximum strength for group E(X) and the above five parameters(Y) were made. From the related chart, the values of correlation coefficient increase in order of 0.61(N) < 0.81(Lt) < 0.87(ρ) < 0.93(Lm) < 0.96(Lmed). The two parameters that have the highest correlations are median length with maximum strength. Through the above correlation analysis between microcrack and strength, the credibility for the results from this study can be enhanced.

홍삼 유래 성분들의 면역조절 효능

  • Jo, Jae-Yeol
    • Food preservation and processing industry
    • /
    • v.8 no.2
    • /
    • pp.6-12
    • /
    • 2009
  • 면역반응은 외부 감염원으로부터 신체를 보호하고 외부감염원을 제거하고자 하는 주요항상성 유지기전의 하나이다. 이들 반응은 골수에서 생성되고 비장, 흉선 및 임파절 등에서 성숙되는 면역세포들에 의해 매개된다. 보통 태어나면서부터 얻어진 선천성 면역반응을 매개하는 대식세포, 수지상 세포 등과, 오랜기간 동안 감염된 다양한 면역원에 대한 경험을 토대로 얻어진 획득성 면역을 담당하는 T 임파구 등이 대표적인 면역세포로 알려져 있다. 다양한 면역질환이 최근 주요 사망률의 원인이 되고 있다. 최근, 암, 당뇨 및 뇌혈관질환 등이 생체에서 발생되는 급 만성염증에 의해 발생된다고 보고됨에 따라 면역세포 매개성 염증질환에 대한 치료제 개발을 서두르고 있다. 또한 암환자의 급격한 증가는 암발생의 주요 방어기전인 면역력 증강에 대한 요구들을 가중시키고 있다. 예로부터 사용되어 오던 고려인삼과 홍삼은 기를 보호하고 원기를 회복하는 명약으로 알려진 대표적인 우리나라 천연생약이다. 특별히, 홍삼은 단백질과 핵산의 합성을 촉진시키고, 조혈작용, 간기능 회복, 혈당강하, 운동수행 능력증대, 기억력 개선, 항피로작용 및 면역력 증대에 매우 효과가 좋은 것으로 보고되고 있다. 홍삼에 관한 많은 연구에 비해, 현재까지 홍삼이 면역력 증강에 미치는 효과에 대한 분자적 수준에서의 연구는 매우 미미한 것으로 확인되어져 있다. 홍삼의 투여는 NK 세포나 대식세포의 활성이 증가하고 항암제의 암세포 사멸을 증가시키는 것으로 확인되어졌다. 현재까지 알려진 주요 면역증강 성분은 산성다당류로 보고되었다. 또 한편으로 일부 진세노사이드류에서 항염증 효능이 확인되어졌으며, 이를 통해 피부염증 반응과 관절염에 대한 치료 효과가 있는 것으로 추측되고 있다 [본 연구는 KT&G 연구출연금 (2009-2010) 지원을 받아 이루어졌기에 이에 감사드린다]. 면역반응은 외부 감염물질의 침입으로 유도된 질병환경을 제거하고 수복하는 중요한 생체적 방어작용의 하나이다. 이들 과정은 체내로 유입된 미생물이나 미세화학물질들과 같은 독성물질을 소거하거나 파괴하는 것을 주요 역할로 한다. 외부로 부터 인체에 들어온 이물질에 대한 방어기전은 현재 두 가지 종류의 면역반응으로 구분해서 설명한다. 즉, 선천성 면역 반응 (innate immunity)과 후천성 면역 반응 (adaptive immunity)이 그것이다. 선천성 면역반응은 1) 피부나 점막의 표면과 같은 해부학적인 보호벽 구조와 2) 체온과 낮은 pH 및 chemical mediator (리소자임, collectin류) 등과 같은 생리적 방어구조, 3) phagocyte류 (대식세포, 수지상세포 및 호중구 등)에 의한 phagocytic/endocytic 방어, 그리고 4) 마지막으로 염증반응을 통한 감염에 저항하는 면역반응 등으로 구분된다. 후천성 면역반응은 획득성면역이라고도 불리고 특이성, 다양성, 기억 및 자기/비자기의 인식이라는 네 가지의 특징을 가지고 있으며, 외부 유입물질을 제거하는 반응에 따라 체액성 면역 반응 (humoral immune response)과 세포성 면역반응 (cell-mediated immune response)으로 구분된다. 체액성 면역은 침입한 항원의 구조 특이적으로 생성된 B cell 유래 항체와의 반응과 간이나 대식세포 등에서 합성되어 분비된 혈청내 보체 등에 의해 매개되는 반응으로 구성되어 있다. 세포성 면역반응은 T helper cell (CD4+), cytotoxic T cell (CD8+), B cell 및antigen presenting cell 중개를 통한 세포간 상호 작용에 의해 발생되는 면역반응이다. 선천성 면역반응의 하나인 염증은 우리 몸에서 가장 빈번히 발생되고 있는 방어작용의 하나이다. 예를 들면 감기에 걸렸을 경우, 환자의 편도선내 대식세포나 수지상세포류는 감염된 바이러스 단독 혹은 동시에 감염된 박테리아를 상대로 다양한 염증성 반응을 유도하게 된다. 또한, 상처가 생겼을 경우에도 감염원을 통해 유입된 병원성 세균과 주위조직내 선천성 면역담당 세포들 간의 면역학적 전투가 발생되게 된다. 이들 과정을 통해, 주위 세포나 조직이 손상되면, 즉각적으로 이들 면역세포들 (주로 phagocytes류)은 신속하게 손상을 극소화하고 더 나가서 손상된 부위를 원상으로 회복시키려는 일련의 염증반응을 유도하게 된다. 이들 반응은 우리가 흔히 알고 있는 발적 (redness), 부종 (swelling), 발열 (heat), 통증 (pain) 등의 증상으로 나타나게 된다. 즉, 손상된 부위 주변에 존재하는 모세혈관에 흐르는 혈류의 양이 증가하면서 혈관의 직경이 늘어나게 되고, 이로 인한 조직의 홍반과, 부어 오른 혈관에 의해 발열과 부종이 초래되는 것이다. 확장된 모세혈관의 투과성 증가는 체액과 세포들이 혈관에서 조직으로 이동하게 하는 원동력이 되고, 이를 통해 축적된 삼출물들은 단백질의 농도를 높여, 최종적으로 혈관에 존재하는 체액들이 조직으로 더 많이 이동되도록 유도하여 부종을 형성시킨다. 마지막으로 혈관 내 존재하는 면역세포들은 혈판 내벽에 점착되고 (margination), 혈관벽의 간극을 넓히는 역할을 하는 히스타민 (histamine)이나 일산화질소(nitric oxide : NO), 프로스타그린딘 (prostagladins : PGE2) 및 류코트리엔 (leukotriens) 등과 같은 chemical mediator의 도움으로 인해 혈관벽 사이로 삼출하게 되어 (extravasation), 손상된 부위로 이동하여 직접적인 외부 침입 물질의 파괴나 다른 면역세포들을 모으기 위한 cytokine (tumor necrosis factor [TNF]-$\alpha$, interleukin [IL]-1, IL-6 등) 혹은 chemokine (MIP-l, IL-8, MCP-l등)의 분비 등을 수행함으로써 염증반응을 매개하게 된다. 염증과정시 발생되는 여러 mediator 중 PGE2나 NO 및 TNF-$\alpha$ 등은 실험적 평가가 용이하여 이들 mediator 자체나 생성관련효소 (cyclooxygenase [COX] 및 nitric oxide synthase [NOS] 등)들은 현재항염증 치료제의 개발 연구시 주요 표적으로 연구되고 있다. 염증 반응은 지속기간에 따라 크게 급성염증과 만성염증으로 나뉘며, 삼출물의 종류에 따라서는 장액성, 섬유소성, 화농성 및 출혈성 염증 등으로 구분된다. 급성 염증 (acute inflammation)반응은 수일 내지 수주간 지속되는 일반적인 염증반응이라고 볼 수 있다. 국소반응은 기본징후인 발열과 발적, 부종, 통증 및 기능 상실이 특징적이며, 현미경적 소견으로는 혈관성 변화와 삼출물 형성이 주 작용이므로 일명 삼출성 염증이라고 한다. 만성 염증 (chronic inflammation)은, 급성 염증으로부터 이행되거나 만성으로 시작된다. 염증지속 기간은 보통 4주 이상 장기화 된다. 보통 염증의 경우에는 염증 생성 cytokine인 Th1 cytokine (IL-2, interferone [IFN]-$\gamma$ 및 TNF-$\alpha$ 등)의 생성 후, 거의 즉각적으로 항 염증성 cytokine인 Th2 cytokine(IL-4, IL-6, IL-10 및 transforming growth factor [TGF]-$\beta$ 등)이 생성되어 정상반응으로 회복된다. 그러나, 어떤 원인에서든 면역세포에 의한 염증원 제거 반응이 문제가 되면, 만성염증으로 진행된다. 이 반응에 주로 작용을 하는 염증세포로는 단핵구와 대식세포, 림프구, 형질세포 등이 있다. 암은 전세계적으로 사망률 1위의 원인이 되는 면역질환의 하나이다. 산화적 스트레스나 자외선 조사 혹은 암유발 물질들에 의해 염색체내 protooncogene, tumor-suppressor gene 혹은 DNA repairing gene의 일부 DNA의 돌연변이 혹은 결손 등이 발행되면 정상세포는 암화과정을 시작하게 된다. 양성세포 수준에서 약 5에서 10여년 후 악성수준의 암세포가 생성되게 되면 이들 세포는 새로운 환경을 찾아 전이하게 되는데 이를 통해 암환자들은 다양한 장기에 동인 오리진의 암세포들이 생성한 종양들을 가지게 된다. 이들 종양세포는 정상 장기의 기능을 손상시켜며 결국 생명을 잃게 만든다. 이들 염색체 수준에서의 돌연변이 유래 암세포는 거의 대부분이 체내 면역시스템에 의해 사멸되는 것으로 알려져 있다. 그러나 계속되는 스트레스나 암유발 물질의 노출은 체내 면역체계를 파괴하면서 최후의 방어선을 무너뜨리면서 암발생에 무방비 상태를 만들게 된다. 이런 이유로 체내 면역시스템의 정상적 가동 및 증강을 유도하게 하는 전략이 암예방시 매우 중요한 표적으로 인식되면서 다양한 형태의 면역증강 물질 개발을 시도하고 있다. 인삼은 두릅나무과의 여러해살이 풀로써, 오랜동안 한방 및 민간에서 원기를 회복시키고, 각종 질병을 치료할 수단으로 사용되고 있는 대표적인 전통생약이다. 예로부터 불로(不老), 장생(長生), 익기(益氣), 경신(經身)의 명약으로 구전되어졌는데, 이는 약 2천년 전 중국의 신농본초경(神農本草經)에서 "인삼은 오장(五腸)을 보하고, 정신을 안정시키고, 혼백을 고정하며 경계를 멈추게 하고, 외부로부터 침입하는 병사를 제거하여주며, 눈을 밝게 하고 마음을 열어 더욱 지혜롭게 하고 오랫동안 복용하면 몸이 가벼워지고 장수한다" 라고 기술되어있는 데에서 유래한 것이다. 다양한 연구를 통해 우리나라에서 생산되는 고려인삼 (Panax ginseng)이 효능 면에서 가장 탁월한 것으로 알려져 있으며 특별이 고려인삼으로부터 제조된 고려홍삼은 전세계적으로도 그 효능이 우수한 것으로 보고되어 있다. 대부분의 홍삼 약효는 dammarane계열의 triterpenoid인 ginsenosides라고 불리는 인삼 saponin에 의해 기인된 것으로 알려져 있다. 이들 화합물군의 기본 골격에 따라, protopanaxadiol (PD)계 (22종) 및 protopanaxatriol (PT)계 (10종)으로 구분되고 있다 (표 1). 실험적 접근을 통해 인삼의 약리작용 이해를 위한 다양한 노력들이 경주되고 있으나, 여전히 많은 부분에서 충분히 이해되고 있지 않다. 그러나, 현재까지 연구된 인삼의 약리작용 관련 연구들은 심혈관, 당뇨, 항암 및 항스트레스 등과 같은 분야에서 인삼효능이 우수한 것으로 보고하고 있다. 그러나 면역조절 및 염증현상과 관련된 최근 연구결과들은 많지 않으나, 향후 다양하게 연구될 효능부분으로 인식되고 있다.

  • PDF