• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.630-639
• /
• 2005

The purpose of this study was to investigate the classifying ability of the igneous rocks with the naked eye for 36 preservice science teachers. For this, we selected six specimens of igneous rocks that consisted of rhyolite, andesite, basalt, granite, diorite, and gabbro, and performed the questionnaire with them. Preservice science teachers needed the average of 3 tools to classify the rocks. Most of the selected tools were loupe, streak plate, hammer and Mohs’ hardness scale. Many preservice science teachers selected basalt and granite samples to classify igneous rocks among 6 kinds of the rocks which were exhibited. However, the results of the identification with the naked eye showed that the right answer rate was significantly different based on what rock sample had been selected. Nobody gave the right answer among 10 students who chose the rhyolite sample, but all of 36 students who picked the basalt sample answered correctly. And $62\%$ of 8 students who chose the andesite sample, 62% of 32 student choosing granite, $7\%$ of 13 students choosing diorite and $44\%$ of 9 students choosing gabbro were correctly answered. In identifying igneous rock samples with the naked eye, most subjects relied on vesicular texture to basalt, and they used textural, color and empirical characters to granite. But, some felt more or less difficulty to distinguish between intermediate and light colors and to recognize porphyry.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.3
• /
• pp.19-27
• /
• 2010

In this study, a series of triaxial tests to Jeju basalt were carried out and then shear strength parameters of rock were estimated by the Lade's three-dimensional failure criterion. Also, the characteristics of shear strength parameters and failure plane which were estimated by the three-dimensional failure criterion were analyzed and this failure criterion was compared with the Mohr-Coulomb failure criterion. The variables of ${\eta}_1$ and m are derived from the relationship between ($I_1^3/I_3-27$) and ($P_a/I_1$) during the failure period using the Lade's three-dimensional failure criterion. The failure plane size of Tracy-basalt has the largest plane and that of Scoria has the smallest plane among other octahedral planes which is the three-dimensional failure plane. Also, the failure plane of Tracy-basalt is formed as a triangle and that of Scoria is formed as a circle among other octahedral planes. As the result of comparison with the triaxial test results and the Lade's failure envelope and the Mohr-Coulomb failure envelope, the Lade's failure envelope matched up under higher stress, while the Mohr-Coulomb failure envelope matched up under lower stress. Also, the Lade's three-dimensional failure plane is larger than the Mohr-Coulomb three-dimensional failure plane. It means that the shear strength parameters estimated by the Lade's failure criterion is larger than that of the Mohr-Coulomb failure criterion.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.3
• /
• pp.167-181
• /
• 2017

Cheongryangsan area ($49.51km^2$) has been designated as the Provincial Park in 1982, because it has magnificent aspect and seasonally spectacular landscapes. Especially, Cheongryangsa sitey ($4.09km^2$) has been designated as Noted Scenery No. 23 in 2007, because it has the same topographical landscape as rock cliffs, rock peaks and caves. The most spectacular landscapes are exhibited in the Cheongryangsan Conglomerate and Osipbong Basalt. There are twelve rock peaks on the ridges of the two strata, and many rock cliffs in the several valleys of strata, in which a few caves are formed by differential weathering and erosion. The valleys, in which flow Cheongryang, Bukgok and Cheonae streams, are classified as fault valleys along WNW-ESE faults. The rock cliffs were generated from vertical joints parallel to WNW-ESE faults in the two strata, and the caves were formed by differential weathering and erosion along bedding of sandstones and shales intercalated in the conglomerates. The rock peaks are landscapes formed by differential erosion along crossed vertical joints in the ridges. The vertical joints are developed subparallel to two WNW-ESE faults and a NNE-WWS fault. Therefore the topographical features are caused by existence of the faults and Lithologic difference in the Cheongryangsan Conglomerate and Osipbong Basalt, and by differential weathering and erosion along them.

• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.19-37
• /
• 1991

The geology of the northwestern Cheju Island consist of Pleistocene to Holocene volcanic rocks which could be devided into basalt layers, the Sungsan Formation composed mainly of volcaniclastic debris exposed along the shoreline, and more than 30 cinder cones. Columnar joints and vesicles are dominant in the basalts of the Pyeosunri and the Sihungri basalt Formations. Volcaniclast and clay layers are intercalated in basaltic layers. When volcaniclast of the interlayers would be swept away by ground water and some caves of channel shape would be formaed. Overlying lavas cracked by columnar joints could be easily destroyed, collapsed and/or sunk. Geomechananical nature of the rocks such as strength may be controlled by the vesicularity(size, shape, and orientation of the vesicles) of the rocks. On the basis of vesicularity as a factor of strength, the effective strength ratio(Ke) could be calculated as Ke=0.3-0.72, in which the smaller Ke value reflects the lower in internal stress. In the studied area, the strength of the rocks tends to decrease as increasing in altitude of provenance of the rocks. The rocks in the area show relatively low values in angle of failure strength($\phi$) ranging from 10$^{\circ}$ to 30$^{\circ}$. In conclnsion, the rocks in question, majority of which the critical value exceeds 0.33, belong to the unstable rocks in the aspect of engineering geology.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.276-283
• /
• 2012

Changes in rock properties due to freezing and thawing cycles ranging from $-20^{\circ}C$ to $10^{\circ}C$ were checked for the typical Korean rocks: granite (weathered), limestone, sandstone, tuff, shale and basalt. The porosity, seismic velocity, shore hardness and specific gravity were measured every 10 cycles for each type of rock up to 40 cycles. The specific gravity was rarely changed. Granite (w), shale and basalt decreased gradually in their shore hardness and seismic velocity values, these values for limestone, sandstone and tuff changed only a very little. The porosity increased in the granite (w), shale and basalt, whereas in the others it did not change. Due to the low tensile strength with high porosity, granite (w), shale and basalt were susceptible to the F-T cycles. A linear regression equation was calculated based on the experiment results according to properties and types of rock. The relationship between the freeze-thaw sensitivity (=initial porosity/initial tensile strength) and the coefficients of the regression equation was examined. With additional experimental data, the coefficients of the regression equation can be estimated using the F-T sensitivity. This makes it possible to predict the properties of rock as affected by freeze-thaw weathering by only measuring the initial properties without knowledge of the regression equation coefficients for each type of rock.

• Journal of the Speleological Society of Korea
• /
• v.13 no.14
• /
• pp.17-98
• /
• 1986

제주도는 제3기 말에서 제4기 초에 걸친 화산활동에 의해 형성된 화산도로서 그 지질계층은 신생대 제3기 말 플라이오세의 서귀포층과 제4기의 성산층, 화순층, 신양리층 등의 퇴적암층과 현무암, 조면암질, 안산암, 조면암 등의 화산암과 기생화산에서 분출한 화산쇄층물로 구성되어 있다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.793-794
• /
• 2008

• Food preservation and processing industry
• /
• v.14 no.2
• /
• pp.70-81
• /
• 2015

• Proceedings of the Petrological Society of Korea Conference
• /
• 2009.05a
• /
• pp.85-86
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.2
• /
• pp.78-85
• /
• 2009

High performance functional fibers are demanded increasingly in the modern industries, while the inorganic fibers such as carbon fibers, glass fibers, and metal fibers are representative among them in that they have high strength, consistent properties in a broad temperature change, etc.. This paper reports on the experimental trial to apply the microwave furnace on melting the natural basalt rock that spreads overall on the global surface and is supposed to be used as the raw material for the inorganic high performance fiber. Results showed that the new method to use the microwave as the heating source to melt the basalt rock was feasible. The crucible spinning could effectively applied for producing the basalt fibers up to 10 micrometer diameter, when the crushed basalt rocks were used. For drawing the molten basalt the drawing roller surface feature was a very important factor.