• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.905-909
• /
• 1995

We constructed the large 3-axis square Helmholtz coil system for the power frequency magnetic field immunity test. We measured the coil factors and magnetic field homogeneities of the fabricated 3-axis square Helmholtz coil. The experimental results for the field homogeneities are in agreement with the theoretical data. From these results, we determined the effective areas for the immunity test. We also confirmed that the low current using the multi-turns coil can be applicable to the immunity test for the high field in short duration.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1573-1578
• /
• 2011

In this study, a novel electromagnetic microrobot system with locomotion and drilling functions in threedimensional space was developed. Because of size limitations, the microrobot does not have actuator, battery, and controller. Therefore, an electromagnetic actuation (EMA) system was used to drive the robot. The proposed EMA system consists of three rectangular Helmholtz coil pairs in x-, y- and z-axes and a Maxwell coil pair in the z-axis. The magnetic field generated in the EMA coil system could be controlled by the input current of the EMA coil. Finally, through various experiments, the locomotion and drilling performances of the proposed EMA microrobot system were verified.

• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.156-162
• /
• 1992

In the measurement of proton gyromagnetic ratio by a low field cechnique, the compensation of earth's field is required to keep a zero-field space. The constant earth's fild is compensated by a cur-rent flowing through a Helmholtz coil, whereas small time-varying component is compensated automatically by a closed loop of feedback system. A feedback amplifier, and two three-dimensional Helmholtz coils having the same coil constant have been constructed in order to compensate the earth's field. field. Preliminary test performed at the ordinary laboratory showed that the time-vary-ing field of ${\pm}100nT$ and the constant field have been reduced to the level of ${\pm}10nT$ using the compensating system.

• Journal of the Korean Magnetics Society
• /
• v.24 no.1
• /
• pp.22-27
• /
• 2014

North indicating azimuth angle sensors have been used in airplanes, ships traditionally and nowadays employed in smart phones. For the azimuth and roll angle measurement of the sensor, 3-axis acceleration sensor was added to the 3-axis magnetic field sensor. In this work, we have constructed a measuring system for the measurement of the magnetic field and the angle uncertainty of the magnetic field sensors. Measuring system could be useful not only in non-magnetic laboratory but also in normal laboratory, we constructed small size of 3-axis Helmholtz coils for the compensation environment magnetic field (Earth magnetic field and magnetic field from building) and the generation of magnetic field for the test of magnetic field sensor. The constructed measuring system could compensate environment magnetic field below 10 nT level and generate 3-dimensional magnetic field with magnitude uncertainty of 0.2 % and angle error of $0.2^{\circ}$ within the volume of ${\pm}30mm$ diameter at center of Helmholtz coils. For the conformation of developed measuring system, We tested commercially available 3-axis magnetometer and heading sensor.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.244-252
• /
• 2015

This paper describes design and construction results of the measurement system developed on the purpose of measuring properties of AC magnetic field sensors used in the weapon system. The system for measuring the properties of AC magnetic field sensors consist of 3-axis helmholtz coil, signal generator, signal amplifier, sensor data acquisition unit and AC magnetic field sensor property measurement & analysis equipment including the operating software. By using this system, we can measure various properties of AC magnetic field sensor such as sensitivity, linearity and dynamic response in the frequency from 1 Hz to 10 kHz. Finally we also verified its performance by measuring the property of a MAG 639, standard magnetic field sensor of bartington instruments, with the developed measurement system.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.36-39
• /
• 1996

We have constructed a disp1acerrent sensor for measuring dynamic magnetostriction of an arrvrphous ribbon under alternating magnetic field using fiber optic Fabry-Perot interferorreter. The signal of the sensor was depen¬dent on the index matching oil and the optical isolator. The resolution of the sensor was $30{\AA}$ and the measured peak to peak magnetostriction of the amorphous ribbon $Fe_{81}B_{13.5}Si_{3.5}C_{2}$ was $28{\times}10^{-6}$.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.388-394
• /
• 1998

We designed and fabricated an improved null-type torque magnetometer for measuring magnetic anisotropy of magnetic materials. This torque magnetometer has a measurement range of $~{\pm}15$ dyne.cm, and the range can be controlled. Resolution is ~0.0005 dyne.cm. Noise level is less than 0.01 dyne.cm with one measurement, and less than 0.004 dyne.cm with 10 averaged measuremets. The precision is less than 0.5 %. In contrast to typical null-type torque magnetometers, we placed a small ferrite magnet in the Helmholtz coil, instead of placing coil in the permanent magnet. From this novel sturucture, we can design a geometrically isotropic and relatively light-weight sample rod. Also, we can prevent the effect of input and output lines of coil exposed in the magnetic field in torque meter. Consequently, our novel null-type torque magnetometer can have a better sensitivity, faster response time, and smaller distortion of torque curve than commercially available torque magnetometers.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.150-153
• /
• 1994

Magnetic field annealing method has been used to obtain proper hysteresis loop shapes which are useful to a device using amorphous ribbon. In this study, two pairs of Helmhotz coils were used to apply longitudinal and transverse magnetic field during annealing. For the measurement of coercive field strength noise which depends on magnetic field annealing, Co-based amorphous alloy ribbon $VITROVAC^{\circledR}$ 6030 was used. For the sample which was annealed under dc transverse and dc longitudinal magnetic field, coercive field strength noise was nearly independent of magnetizing frequency ranging from 1 to 100 kHz, but dc transverse and ac longitudinal magnetic fields annealed samples show that the coercive field strength noise decreased in power of magnetizing frequency. When magnetic domain nucleation occurred, the coercive field strength noise increased remarkably and decreased in power of magnetizing frequency.

• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.150-155
• /
• 1992

The low magnetic field standard below 1 mT with resolution of 100 nT has been established for the calibration and testing of low field magnetometers. A precision single layered solenoid, which is made of quartz tube and bare copper wire, was constructed in order to generate a precise magnetic field. To improve the field homogeneity in the solenoid, three-current method was employed. The injected current and injection points on the solenoid were optimized by computer simulation. The magnetic field uncertainty in the solenoid was 0.1 % and 0.01 % in the range of ${\pm}5\;cm$ from the center for a single and three-current methods respectively. We also constructed a testing system for the dynamic properties of low field magnetometers.