• The tire
• /
• s.13
• /
• pp.5-11
• /
• 1968

도로사정의 개선에 따라 우리 나라의 자동차 사용조건은 저속, 과적, 험로라고 일컬어지는 한국적인 조건에서 고속, 정량적재 및 포장도로의 서구조건으로 이행하고 있으며 특히 최근에 경부간 고속자동차도로가 일부 착수되고 있다. 이 도로의 설계속도는 80km~120km의 고속으로서 종래 험로에만 대부분 주행해 왔던 우리 나라의 타이어는 고속이란 새로운 사용조건을 맞이하게 되었다. 여기서는 주로 고속타이어의 성능 및 고속을 극복할 수 있는 타이어의 성능에 대하여 개괄적으로 설명키로 한다.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.58-63
• /
• 2010

In this paper, design and implementation of multi-modular robots of similar structure to the arthropods for rock path driving. Each module corresponds to an arthropod joint, which has an independent power supply and control equipment including drive and short-range Zigbee wireless communication that were implemented. On various directions and paths each module has the same driving direction and each module is controlled to operate or not by wireless communication. Depending on path condition, each module calculate the speed and torque and depending on the slope of a rough path, the number of active modules can be changed for the efficient driving on a variety of roads conditions. Experimental driving through rough road model, variable multi-module robot is implemented.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.11a
• /
• pp.359-360
• /
• 2006

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.104-110
• /
• 2005

In this paper, unmanned vehicle system and VFF algorithm development with vehicle dynamics is the main topic as a part of Intelligent Transportation System. Unmanned vehicle system is classified by vehicle system and control system. Authors used RC servo motor for longitudinal control via throttle angle, shift lever control, and brake control. For lateral control, authors used step motor, equipped with reduction gear. Unmanned vehicle has nine ultrasonic sensors in front of the unmanned vehicle. After the microcontroller computes the distance between unmanned vehicle and obstacle, the control computer calculates the steering angle enough to avoid the obstacle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.157-165
• /
• 2016

In wartime conditionsmilitary combat vehicles are required to be driven on rough roads that have significant obstacles. A wheel type dog-horse robot with a rotary suspension system was applied to overcome the obstacles. To achieve real-time analysis, a simplified model was proposed by using velocity transformations. Through comparison with the multi-body dynamics model, the efficiency and accuracy of the proposed modeling was proven.

• Journal of Intelligence and Information Systems
• /
• v.11 no.2
• /
• pp.47-57
• /
• 2005

In this research, the main theme is the system integration of driving simulator and unmanned vehicle. The total system is composed of the mater system and the slave system. The master system has a cockpit system and the driving simulator. The slave system means an unmanned vehicle, which is composed of the actuator system the sensory system and the vision system. The communication system is composed of RS-232C serial communication system which combines the master system with the slave system. To integrate both systems, the signal classification and system characteristics considered DSP(Digital Signal Processing) filter is designed with signal sampling and measurement theory. In addition, to simulate the motion of tele-operated unmanned vehicle on the driving simulator, the classical washout algorithm is applied to this filter, because the unmanned vehicle does not have a limited working space, while the driving simulator has a narrow working space and it is difficult to cover all the motion of the unmanned vehicle. Because the classical washout algorithm has a defect of fixed high pass later, fuzzy logic is applied to reimburse it through an adaptive filter and scale factor for realistic motion generation on the driving simulator.

• Journal of the KSME
• /
• v.34 no.10
• /
• pp.787-795
• /
• 1994

이상과 같이 소개한 KIST 휴먼 로봇의 4족 보행시스템을 개발하는 데에 있어서 최대 목표는 보행제어의 지능화를 통해서 외관상 유사한 히타치사의 극한작업 로봇과 차별화시키는 것이다. 이를 위해서는 성능이 급격히 향상되어가고 있는 최신의 컴퓨터와 센서들을 적극 활용하면서 국내외 관련 전문가들이 축적하고 있는 노우 하우들을 최대한 활용하는 것이 필요하고, 기술적 으로는 걸음새의 지능제어, 반사제어, 소비동력의 최소화 등을 집중적으로 해결하는 것이 요구 된다. 휴먼 로봇 보행기구의 연구 성과는 궁극적으로 계단 등과 같은 단순 장애물은 물론 얼마나 악조건의 험로 위 자율 보행이 가능하고, 평제에서는 얼마나 빠른 최대 보행속도를 발휘할 수 있으며, 로봇에 탑재된 축전지만으로 얼마나 먼거리를 보행할 수 있는 지에 의해 그 질적 수 준이 판가름 나게 될 것이다. 이러한 점에서 이 과제의 추진은 국내의 로봇 연구 분야에 있어서 전혀 새로운 매우 거대한 도전이라고 할 수 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.259-266
• /
• 2000

Crash test data from different impact modes and threshold speeds were used to assess the effects of impact conditions on air bag electronic single point sensing (ESPS) activation requirements. The requirements are expressed in terms of the desired sensor activation time based on unbelted driver dummy kinematics. A crash discriminator pre-displacement is introduced to crash recognition algorithm to the ESPS. The new crash recognition algorithm named Velocity Energy Pre-displacement(VEPD) method is developed and the ESPS algorithm based on the VEPD technique is used to assess the ESPS system performance. It is shown that VEPD method correlates very well with desired sensor activation time and meets the activation requirement.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.44-45
• /
• 2014

본 논문은 ITER의 플라즈마 제어를 위하여 자기적으로 결합된 초전도 PF 코일에 흐르는 전류를 제어하는 기법과 RTDS 실험결과를 분석하였다. MATLAB/SIMULINK를 이용하여 유도 결합된 4개의 초전도코일을 모델링하여 전류제어기법을 시뮬레이션하였으며, 실험은 RTDS를 이용하여 진행하였다. 각 부하전류가 전류 지령치를 추종할 때, 동시다발적으로 발생하는 상호 인덕턴스와 전류 극성변화의 영향을 MIMO(Multi Input Multi Output) 시스템 기반으로 하여 각 초전도코일의 전압변화 특성을 해석하였다. 시뮬레이션과 실험을 통해 MIMO 시스템 특성의 유도 결합된 초전도코일의 전류제어 특성을 검증하였다.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.6
• /
• pp.287-292
• /
• 2001

This paper deals with the configuration, operating principles, systematic calculation method of parameter and optimization method of test circuit for parallel current injection method, series voltage injection method and hybrid synthetic test method as the method for performance test of circuit breaker with extra high interrupting capacity. The test method depicted above is applied to short-circuit making and breaking test (operating sequence :Os CdOs, Od-CdOs) and out-of-phase tests(operating sequence :Os, CdOs) for performance test of the newly-developed 420kV, 50kA and 800kV 50kV puffer-type gas circuit-breaker according to IEC 60056 and IEC 60427. The testing results, evaluation of equivalence for test and analyzed results are also presented in this paper.