• Title/Summary/Keyword: 허용 기준

Search Result 1,694, Processing Time 0.037 seconds

Study on the Amendment of Standard Regulations of Food Additives and Contaminants for Infant Formulas in Korea (우리나라 영.유아용 조제식의 식품첨가물과 오염물질 기준 개선방안 연구)

  • Moon, Ji-Hea;Lee, Heon-Ok;Shim, Jae-Young;Kim, In-Hye;Shin, Hye-Seoung;Won, Sun-Im;Paik, Min-Kyoung;Shin, Hyoung-Soo;Om, Ae-Son
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.37 no.9
    • /
    • pp.1214-1221
    • /
    • 2008
  • The aim of this study is to propose suggestions for establishing Korean regulatory standards of infant formula. Accordingly, the regulatory standards for food contaminants and additives in Korean infant formulas were compared and analyzed with those in CODEX, EU, Australia and New Zealand. Several suggestions for regulations were found from different countries. Firstly, it is advisable that additives for nutrient supplement of infant formula be classified as types of nutrients. Secondly, it is proposed that guidelines should be set on the maximum amount of additives in infant formula. Thirdly, pathogens such as Staphylococci and Salmonella of infant formula should be regulated. Finally, present regulations need to establish the maximum permissible levels of some pesticides, Pb and Al, that other countries are already regulating. These proposed recommendations would broaden the scope of infant formula regulatory standards needed for infants' health.

A Study on Allowable Temperature Characteristics for Overhead Transmission Conductor (가공송전 선단시간 허용온도 특성 실험 및 고찰)

  • Jang, Tae-In;Park, Hung-Sok;Kang, Ji-Won;Yoon, Hyung-Hee;Oh, Jang-Man;Min, Byeong-Wok
    • Proceedings of the KIEE Conference
    • /
    • 2007.07a
    • /
    • pp.727-728
    • /
    • 2007
  • 송전선로의 송전능력은 크게 연속허용용량과 단시간 허용 용량으로 구분되는데, 단시간 허용용량은 전선의 수명에 영향을 미치므로 이에 대한 명확한 기준과 관리가 필요하다. 단시간 운영기준의 정립을 위해서는 송전선 도체의 과부하 시간에 따른 도체수명평가 기술이 필요하며, 선로의 취약지점인 접속개소에 대한 열특성 분석이 수반되어져야 한다. 본 논문에서는 과부하시나 돌발적 위급상황시 송전선의 단시간 운영과 관련된 도체 및 접속개소의 열특성을 파악하기 위하여 전선 및 접속슬리브의 고온인장강도시험과 가속열화시험을 통해 단시간 허용 온도특성을 살펴보고, 그 결과에 대하여 분석 및 검토한다. 분석 및 검토결과는 ACSR계 도체의 단시간허용온도가 현행의 100$^{\circ}C$에서 120$^{\circ}C$ 이상으로 상향조정이 가능함을 보여준다.

  • PDF

간질 환자의 차량 운전

  • Byeon, Yeong-Ju;Park, Mi-Yeong;Ha, Jeong-Sang
    • Journal of Yeungnam Medical Science
    • /
    • v.11 no.1
    • /
    • pp.16-29
    • /
    • 1994
  • 1. 현재 보편적으로 참고가 되는 간질 환자의 운전 면허 허용의 기준과 관련 법규등을 요약하면 표-5와 같다. 2. 아직 어떤 국가에서는 간질환자의 차량운전을 무경련 기간에 상관없이 금하고 있으나, 대다수의 국가에서는 일정한 기간의 무경련의 존재가 면허 허용의 중요한 기준으로 삼고 있으며, 대략 1년간의 기간을 요구하고 있다. 그러나 간질은 그 특징상 1년 혹은 2년의 무경련후에도 경련이 발생될 수 있어 1년간의 무경련으로 면허 발급을 허가는 제도는 더 연구하여 보완할 필요가 있다. 3. 수면시 간질, 전구증상이 있는 복합 부분 간질, 단순 운동성 간질, 특수한 여건이나 자극에서 생기는 경련환자에게 선택적으로 운전면허 허용은 장시간 운전, 고속 운전, 심리적 육체적 과로상태에서 운전을 하는 경우 기존 경련을 심하게 유발하거나, 평소와 다른 상황에서 경련이 생길 수 있어 이런 환자들에게 일괄적으로 면허를 허용하기 보다는 세밀하게 분석하여 개인별로 판별하여야 하는 것이 바람직하다. 4. 환자의 능동적이고 성실한 경련보고와 아울러 경련발생 가능성이 높아 의사의 운전중단 처방을 수용하고 따르는 협조적인 환자의 자세가 매우 중요한데, 현재까지 환자의 성실한 경련보고와 의사의 조치에 대한 환자의 적극적인 수용자세가 해결되지 않고 있다.

  • PDF

Suggestion of Design Criteria in Merge Areas of Climbing Lanes (오르막차로 종점부 설계기준에 관한 연구)

  • 권오철;원제무;김상구
    • Journal of Korean Society of Transportation
    • /
    • v.17 no.1
    • /
    • pp.19-28
    • /
    • 1999
  • This study deals with developing Critical GaP Model and Merge Probability Model which describe traffic patterns in the microscopic view, for the Purpose of suggesting a proper design criteria within the climbing lane section. Minimum tolerance speeds at the end of the climbing lane are calculated 60km/hr for 2-lane freeway, and 75km/hr for 4-lane freeway. In case of 2-lane freeway, the result is same as existing design criteria. and a new value is 15km/hr higher than existing design criteria for 4-lane freeway. In addition, auxiliary length at the end of the climbing lane is needed about 200m for 4-lane freeway to adjust high minimum tolerance speed. Therefore we propose to increase minimum tolerance speed for 4-lane freeway.

  • PDF

한국 작업자의 요통예방을 위한 작업하중 설계지침

  • 이관석;박희석;서치원
    • Proceedings of the ESK Conference
    • /
    • 1995.04a
    • /
    • pp.97-105
    • /
    • 1995
  • 본 연구의 목적은 드는 작업에 있어서 한국 작업자의 적정하중을 구하여 중량물 안전기준을 정하는 것이다. 본 연구에서는 주어진 작업조건하에서 피실험자가 들어올릴 수 있는 적정하중을 결정하기 위 한 기준으로서 피실험자 자신에 의해서 인지되는 스트레스 정도를 이용하는 심리육체적 방법(Psychophysical method), 주어진 작업조건하에서 요추에 가해지는 압력을 이용하는 생체역학적 방법(Biomechanical method), 주어진 작업조건하에서 피실험자의 에너지 소모량을 이용하는 생리학적 접근법등이 이용되었다. 피실험자는 학생(n=3) 두개의 군으로 나뉘어진다. 실험에 들어가기 전에 피실험자에 대한 인체측정과 근력측정을 수행 하였다. 실험은 수직면에서 드는 빈도(1,2, 와 4회/분)와 드는 높이(0-8cm 와 47-102cm)를 조합한 6가지의 작업을 무작위로 선택하여 심리육체적 방법으로 각 작업에 대한 적정하중을 구하였다. 연구결과로서 피실험 자의 신체자료와 근력의 비교로부터 신체조건은 학생이 우수하였으나, 근력은 작업자가 우수하였다. 본 연구 에서 채택된 들기의 빈도가 변함에 따라 최대허용 하중은 변하였다. 작업자군에 대하여는 빈도가 증가할수록 최대허용 하중은 감소하였으며, 학생군에 대하여는 분당 1회와 분당 4회간의 유의한 차이가 있었다. 들기의 시작-종점의 변화에따른 최대허용 하중은 통계적으로 유의하지 않았다. 위의 두 결과는 들기의 빈도가 들기의 시작-종점보다 민감한 변수임을 가리키며 이는 미국 NIOSH의 결과와 일치한다. 심리육체적 방법을 사용하여 우리나라의 젊고 건강한 남성의 대부분(99%)을 고려하여 산출된 최대허용 하중은 미국 NIOSH 안전기준과 큰 차 이가 없음을 발견하였다. 또한 이 최대허용 하중은 인체역학적방법과 생리학적 방법을 사용하여 검토한 결과, 무리가 없는 수준임이 입증되었다. 본 연구의 결과를 토대로우리나라 젊고 건강한 남성에게 적합한 무게상수는 작업자군에 대하여 25.05kg, 학생군에 대하여 20.24kg 으로 나타나 이는 미국 NIOSH 안전기준과 대체로 일치함을 발견하였다.

  • PDF

Analysis of Load-Settlement Curves in Driven and Embedded Piles (항타 및 매입말뚝의 하중-침하량 곡선의 분석)

  • 천병식;조천환
    • Geotechnical Engineering
    • /
    • v.13 no.6
    • /
    • pp.61-70
    • /
    • 1997
  • Although the load -settlement curve characteristics of embedded piles are different from those of driven piles, for the determination of their allowable loads the same analysis method has been adopted without any considerations. According to the related domestic chi teria, the analysis methods of load-settlement curve have some conflicts among themselves and have several vague points in obtaining the allowable capacity from ultimate or yield capacity. In order to solve those problems, the relevant literatures were reviewed. And also the result of 106 pile load tests was analysed. Analysis result indicates that analysis met hods of the load-settlement curve based on single mathematical curve are not suitable for the general analysis method of load-settlement curves due to their various characteristics. As a result, the appropriate analysis methods and safety factors for the determination of allowable capacity of pile are suggested in this paper.

  • PDF

Pesticide Residues Survey on Agricultural Products before Auction at Whole Market in Busan Area during 2006~2008 (2006~2008년 부산지역 농산물도매시장 경매 전 농산물의 잔류농약 조사)

  • Kwon, Sun-Mok;Park, Eun-Hee;Kang, Jeong-Mi;Jo, Hyeon-Cheol;Jin, Seong-Hyeon;Yu, Pyeong-Jong;Ryu, Byeong-Sun;Jeong, Gi-Ho
    • The Korean Journal of Pesticide Science
    • /
    • v.14 no.2
    • /
    • pp.86-94
    • /
    • 2010
  • This study was conducted to monitor the current status of pesticide residues in agricultural products before auction at whole markets in Busan area from March 2006 to December 2008. Of the 7,237 samples that were analyzed by multiresidue methods, 1,164 samples (16.1%) had pesticide residues and 231 samples (3.2%) exceeded the maximum residue limits (MRLs). 181 samples of the 231 samples exceeding MRLs were applied to the tentative limits because the use of the pesticides for the agricultural products was not established against the MRLs in the Korea Food Code, and it is equivalent to 78.4%. The order of pesticides exceeding MRLs was endosulfan, procymidone, chlorothalonil, ethoprophos, chlorpyrifos, diethofencarb, kresoxim-methyl and EPN. Of 211 samples with two or more pesticides residues, the residues exceeded the MRLs in 80 samples and it is equivalent to 37.9%. This study results suggested that pesticide residues exceeding MRLs could be attributed to the use of inapplicable pesticides for agricultural products and the use of two or more pesticides.

Ultimate Behavior of Plate Girders with High Strength Steel in Combined Bending and Shear (휨과 전단을 받는 고강도강 플레이트거더의 극한거동)

  • Kim, Jong-Min;Hwang, Min-Oh;Kang, Young-Jong
    • 한국방재학회:학술대회논문집
    • /
    • 2010.02a
    • /
    • pp.84.1-84.1
    • /
    • 2010
  • 국내에서는 플레이트거더의 휨 강도 및 전단 강도를 허용응력설계법에 기반한 도로교설계기준(2005)에 근거하여 규정하고 있으며, 국외의 경우 하중저항계수설계법에 근간을 둔 AISC(2005) 등의 규정을 통해 산정하고 있다. 최근에는 인장강도 800MPa 급의 강재가 생산되고 있으나 국내 설계기준에서는 아직까지 상기 인장강도를 갖는 고강도강에 대한 설계기준은 마련되지 않고 있다. 본 연구에서는 휨과 전단이 동시에 작용하는 고강도강 적용 플레이트거더의 극한거동 해석을 통해 국내기준의 적용성을 판단하고, 국외기준인 AISC(2005)와 비교하여 나타내어 허용응력설계법에 근거한 국내기준의 강도산정법의 한계점에 대해 고찰하였다.

  • PDF

자료-작업환경 측정방법

  • Korea Industrial Health Association
    • 산업보건소식
    • /
    • no.39
    • /
    • pp.25-29
    • /
    • 1987
  • 노동부는 유해물질의 허용농도를 작업환경측정방법과 분리하여 각각의 규정을 제정함으로써 허용농도설정의 근본취지에 부합되게 하는 동시에 허용농도 제정대상 유해물질의 종류를 394종(현재 60종)으로 확대하여 산업안전보건법 제18조 및 동법 제31조 규정에 의한 작업환경개선 및 평가의 기준 으로 사용할 수 있도록 유해물질의 허용농도를 고시 제 86-­45호로 제정하고 현행 작업환경측정방법을 고시 제 86-46 호로 개정하였으며 '87.4.1 부터 시행한다.

  • PDF

Analysis of Variability Factors in Establishing Pesticide Residue Limits on Food Crops (농산물중 농약잔류 허용기준 설정시의 변이계수 분석)

  • Lee, Mi-Gyung;Lee, Su-Rae
    • Korean Journal of Food Science and Technology
    • /
    • v.37 no.3
    • /
    • pp.492-497
    • /
    • 2005
  • In establishing legal limits of pesticide residues, various default values are employed to compensate for unavoidable variability in data. Because permissible errors in residue analysis reach ${\pm}30-40%$ RSD, maximum residue limits (MRLs) follow geometric progression. According to 5-yr period JMPR reports, variability factor (ratio of highest to median values) in field residue trials was 3.8-fold in 486 crop-pesticide combinations and round-up effort from highest residue to MRL was 1.5-fold, whereas regulatory margin (ratio of MRL to highest residue) used in Korea was 4.8-fold in 822 crop-pesticide combinations; Korean MRLs will be set at higher levels as compared with Codex limits if these margins are employed. Validation studies to compare and harmonize Korean and Codex MRLs of pesticide residues on food crops should be undertaken.