• 제목/요약/키워드: 허용 기준

Search Result 1,695, Processing Time 0.034 seconds

Survey of Contaminants of 3-MCPD and 1,3-DCP in Soy Sauce Using GC/MSD (GC/MSD를 이용한 간장 중 3-MCPD와 1,3-DCP의 오염도 조사)

  • Kim Myung-Gill;Kim Young-Sug;Lee Myung-Jin;Kim Jae-Kwan;Kim Kyung-A;Park Eun-Mi;Ko Hoan-Uck;Son Jin-Seok
    • Journal of Food Hygiene and Safety
    • /
    • v.21 no.3
    • /
    • pp.153-158
    • /
    • 2006
  • The contamination levels of 3-MCPD(3-Monochloropropane-1,2-diol) and 1,3-DCP(1,3-Dichloro-2-Propanol) in soy sauce, sauces was monitored. 105 samples were collected from June 2005 to August 2005 in Gyeonggi-do. 3-MCPD and 1,3-DCP were analyzed by GCMSD. As results, the detection range of 3-MCPD concentration was between 0.02 mg/kg and 0.27 mg/kg in soy sauce. However any samples were not detected with 1,3-DCP. The contaminated rates of 3-MCPD in soy sauce was 17.1%. Soy sauce is the representative vegetable protein hydrolyzed food. The reliable analytical method f3r the toxic 3-MCPD and 1,3-DCP in Soy sauce has been studied. The derivatization studies of 3-MCPD and 1,3-DCP were performed mainly as Silylation with BSA(N,O-Bis(trimethylsilyl)-acetamide). The retention times of derivative, BSA-MCPD, BSA-DCP were 11.30 and 10.12 minutes.

Application of Predictive Food Microbiology Model in HACCP System of Milk (우유의 HACCP 시스템에서 Predictive Food Microbiology Model 이용)

  • 박경진;김창남;노우섭;홍종해;천석조
    • Journal of Food Hygiene and Safety
    • /
    • v.16 no.2
    • /
    • pp.103-110
    • /
    • 2001
  • Predictive food microbiology(PFM) is an emerging area of food microbiology since the later 1980’s. It does apply mathematical models to predict the responses of microorganism to specified environmental variables. Although, at present, PFM models do not completely developed, models can provide very useful information for microbiological responses in HACCP(Hazard Analysis Critical Control Point) system and Risk Assessment. This study illustrates the possible use of PFM models(PMP: Pathogen Modeling Program win5.1) with milk in several elements in the HACCP system, such as conduction of hazard analysis and determination of CCP(Critical Control Points) and CL(Critical Limits). The factors likely to affect the growth of the pathogens in milk involved storage fixed factors were pH 6.7, Aw 0.993 and NaCl 1.3%. PMPwin5.1 calculated generation time, lag phase duration, time to level of infective dose for pathogens across a range of storage (Critical Control Points) and CL(Critical Limits). The factors likely to affect the growth of the pathogens in milk involved storage temperature, pH, Aw and NaCl content. The factors likely to affect the growth of the pathogens in milk involved storage temperature, pH, Aw and NaCl content. The variable factor was storage temperature at the range of 4~15$^{\circ}C$ and the fixed factors were pH 6.7, Aw 0.993 and NaC 1.3%. PMPwin5.1 calculated generation time, lag phase duration, time to level of infective dose for pathogens across a range of storage temperature.

  • PDF

A Study on the Over-current Characteristics of IV Insulated Wire Sheath According to Accelerated Degradation (가속열화에 따른 IV절연전선 피복의 과전류 특성에 관한 연구)

  • Kim, Si-Kuk;Choi, Su-Gil
    • Fire Science and Engineering
    • /
    • v.32 no.2
    • /
    • pp.48-56
    • /
    • 2018
  • This paper reports the results of a study on the over-current characteristics of IV insulated wire sheath according to accelerated degradation. In order to examine the degradation of a IV insulated wire sheath through insulation, acceleration degradation experiments were performed using the Arrhenius equation of acceleration life test models; test samples with equivalent lives of 0, 10, 20, 30 and 40 years were prepared. Then allowed currents with over-current of 100%~500% were introduced to measure the times of first generation of smokes and carbonization in the wire sheath, and it was found that the times of first generation of smokes and carbonization in the wire sheath decreased as the equivalent life increased. In more detail, when 270% over-current is applied, the electrical fire risk of equivalent life of 40 years increased by approximately 3.2 times based on equivalent life of 0 years. Also, when the over-current was 255% and 260%, carbonization occurred only in the equivalent life of 40 years, and the fire risk according to the accelerated degradation was increased dramatically. In addition, FT-IR and SEM analyzes were used to confirm the characteristics and surface changes of IV insulated wire sheath according to the equivalent life.

Map registration of building construction plan drawing with shape matching of cadastral parcel polygon (필지 객체의 형상 정합을 이용한 건물 설계도면의 좌표 등록)

  • Huh, Yong;Yu, Kiyun;Yang, Sungchul
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.31 no.3
    • /
    • pp.193-198
    • /
    • 2013
  • This study proposed a map registration method of a building construction plan drawing with shape matching of cadastral parcel polygon. In general, the drawing contains information about a building boundary and a cadastral parcel boundary. The shape of this cadastral parcel boundary should be same as that of the corresponding parcel polygon object in the KLIS continuous cadastral map. Thus, shape matching between two parcel boundary polygons from the drawing and cadastral map could present transformation parameters. Translation and scaling amounts could be obtained by difference of centroid coordinates and area ratio of the polygons, respectively. Rotation amount could be obtained by the rotation that presents the minimum Turning function dissimilarity of the polygons. The proposed method was applied for building construction plan drawings in eAIS for an urban area in Suwon. To assess positional accuracy of map registration, building polygons in registered drawings and aerial photos were compared. According to the accuracy of the cadastral map which is the reference dataset of the proposed method, the RMSE of corresponding buildings' corners was 0.95m and 2.37m in new and old urban areas, respectively.

Reduction Rate of Azoxystrobin, Fenhexamid and Cyprodinil during Ginseng Processing (홍삼 가공중 azoxystrobin, fenhexamid 및 cyprodinil농약의 감소율)

  • Im, Moo-Hyeog;Kwon, Kwang-Il;Park, Kun-Sang;Lee, Kyung-Jin;Chang, Moon-Ik;Yun, Won-Kap;Choi, Woo-Jong;Yoo, Kwang-Soo;Hong, Moo-Ki
    • Korean Journal of Food Science and Technology
    • /
    • v.39 no.5
    • /
    • pp.575-579
    • /
    • 2007
  • This study was performed to acquire scientific data for establishing the maximum residue limits (MRLs) of pesticides in Korean red ginseng and its extract. Pesticides (azoxystrobin, fenhexamid, cyprodinil) were applied to a cultivated field of ginseng, and the fresh ginseng was harvested and processed to make Korean red ginseng and its extract. The reduction rates of the residue pesticides were calculated by determining the pesticide contents in each stage of ginseng processing. The residue levels in fresh ginseng were 0.12 ppm for azoxystrobin, 0.19 ppm for fenhexamid, and 1.78 ppm for cyprodinil. The residue levels in Korean red ginseng were 0.24, 0.54, and 1.49 ppm, and in the extract 0.81, 1.93, and 3.66 ppm for azoxystrobin, fenhexamid, and cyprodinil, respectively. The steaming and processing of fresh ginseng increased azoxystrobin and fenhexamid residues, but cyprodinil was reduced. The reduction rates (dry basis) of azoxystrobin, fenhexamid, and cyprodinil were 0.66, 0.94, and 0.28 for Korean red ginseng, and 3.25, 4.94, and 1.01 for the extract, respectively.

Safety Simulation of Therapeutic I-131 Capsule Using GEANT4 (GEANT4를 이용한 치료용 I-131 캡슐의 안정성 시뮬레이션)

  • Jeong, Yeong-Hwan;Kim, Byung-Cheol;Sim, Cheol-Min;Seo, Han-Kyung;Gwon, Yong-Ju;Han, Dong-Hyun
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.18 no.2
    • /
    • pp.57-61
    • /
    • 2014
  • Purpose Iodine (I-131) is one of the most widely used radioactive isotopes for therapeutic in the field of nuclear medicine. Therapeutic I-131 capsule is made out of lead to shield high energy radiation. Accurate dosimetry is necessarily required to perform safe and effective work for relative workers. The Monte Carlo method is known as a method to predict the absorbed dose distribution most accurately in radiation therapy and many researchers constantly attempt to apply this method to the dose calculation of radiotherapy recently. This paper aims to calculate distance dependent and activity dependent therapeutic I-131 capsule using GEANT4. Materials and Methods Therapeutic capsules was implemented on the basis of the design drawings. The simulated dose was determined by generating of gamma rays of energy to more than 364 keV. The simulated dose from the capsule at the distance of 10 cm and 100 cm was measured and calculated in the model of water phantom. The simulated dose were separately calculated for each position of each detector. Results According to the domestic regulation on radiation safety, the dose at 10 cm and 100 cm away from the surface of therapeutic I-131 capsule should not exceed 2.0 mSv/h and 0.02 mSv/h, respectively. The simulated doses turned out to be less than the limit, satisfying the domestic regulation. Conclusion These simulation results may serve as useful data in the prediction of hands dose absorbed by I-131 capsule handling. GEANT4 is considered that it will be effectively used in order to check the radiation dose.

  • PDF

Case Study of Cost Effect Analysis for Toxic Compounds to Developing Effluent Limitation Standards : Focus on 1,4-Dichlorobenzene (수질유해물질 배출허용기준 설정에 따른 배출시설 비용영향 분석사례 연구: 1,4-Dichlorobenzene을 중심으로)

  • Kim, Kyeongjin;Kim, Wongi;Heo, Jin;Kim, Kwangin;Kim, Jaehoon;Kim, Sanghun;Yeom, Icktae
    • Journal of Korean Society on Water Environment
    • /
    • v.26 no.4
    • /
    • pp.557-565
    • /
    • 2010
  • Recently, regulations on toxic compounds in aquatic environment have been strengthened in korea due to the increasing public awareness of the water quality. Typically, these regulations include introduction of emerging toxic compounds and stricter effluent limitations for the already regulated compounds. However, too strict regulations may cause excessive burden on the industry. Therefore it is also important to assess the economic impacts when the new effluent limitation guidelines are introduced. The estimation of the additional cost for the wastewater dischargers to meet the new guidelines are based on the selected treatment technology to handle the hazardous substances and the regulatory levels for effluent limitations. To explore the procedures for cost estimation in enforcing new effluent limitations, a case study was performed specially for 1,4-dichlorobenzene. The pollutants of concern are surveyed for different industrial categories and various treatment technologies. For a given pollutant, the general performances of the treatment technologies are surveyed and a representative technology is selected. For a given technology, the capital cost and annual Operation and Maintenance (O&M) cost was calculated. The calculation of baseline costs to operate ordinary treatment technologies is also important. The ratio between the cost for introducing new treatment process and the baseline cost required for conventional technology was used to evaluate the economic impact on the industry. For 1,4-dichlorobenzene, steam stripping and activated carbon processes were selected as the specific treatment technologies. The cost effects to the regulation of the compound were found to be 6.4% and 14.5% increase in capital cost and O&M cost, respectively, at the flow rate over $2,000m^3/d$ for the categories of synthetic resin and other plastics manufacturing industry. For the case of petrochemical basic compounds manufacturing industry, the cost increases were 5.8% and 12.4%, respectively. It was suggested that cost effect analysis to evaluate the economic impacts of new effluent limitations on the industry is crucial to establish more balanced and reasonable effluent limitations to manage the industrial wastewater containing emerging toxic compounds in the wastewater.

Chemical Composition of Cultured and Wild Codonopsis lanceolata Roots of Different Age Groups -I. Proximate Composition, Minerals and Protein Fractions- (더덕(沙蔘)의 년근별(年根別) 화학성분(化學成分)에 관(關)한 연구(硏究) -제1보(第1報) : 일반성분(一般成分), 무기질(無機質) 및 단백질(蛋白質) 분획(分劃)-)

  • Park, Boo-Duck;Park, Yong-Gone;Choi, Kwang-Soo
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.14 no.3
    • /
    • pp.274-279
    • /
    • 1985
  • Proximate compositions, minerals and protein fractions of the roots of cultured and wild Codonopsis lanceolata of different age groups were examined as the basic research for the study of their source of processed foods. The most abundant proximate composition of the roots of C. lanceolata was observed to be total sugars and next come crude protein, crude fiber, crude fat and ash in descending order irrespective of cultured and wild ones. The richest mineral contained in the roots was noticed to be K and followed by Mg and Ca. Generally increased tendency of crude protein, fat, ash, K, Mg, Ca, Mn, Zn, Cu and P contents were observed with older roots, however, decreased total sugars and Fe content. Lead and cadmium content was far bellow the authorized tolerance limits. The quantitative fractionation of the protein of the roots ranked albumin the highest content, followed by globuin, prolamin and glutelin. Decreased albumin content was observed with the older age roots, while increased globulin, prolamin and glutelin content. The minimum solubility of the soluble protein of the roots was found to be at pH 4.0 and maximum, at pH 10.0. Disc gel electrophoresis of the soluble protein of C. lanceolata roots showed almost similar patterns and numbers of bands. The molecular weight for main band protein was estimated to be about 90,000.

  • PDF

Development of Separation System with Rotating Rakes for Recovery of Film-based Plastics (기계식(機械式) 회전(回轉)레이크를 이용(利用)한 생활계(生活界) 폐기물(廢棄物) 필름류(類) 선별장치(選別裝置) 개발(開發)에 관(關)한 연구(硏究))

  • Lee, Byung-Sun;Na, Kyung-Duk;Han, Sang-Kuk;Choi, Woo-Zin;Park, Eun-Kyu
    • Resources Recycling
    • /
    • v.19 no.3
    • /
    • pp.24-32
    • /
    • 2010
  • In the present work, a new separation system with rotating rakes has been developed to separate the film-based plastics from the recyclable materials, and environment assessment is also carried out during operation of the device. Capacity of the device was about 5.3 ton/hr at a rakes rotation speed of 26.0 rpm (the number of rakes in the 1st, 2nd and 3rd trials were 39, 52 and 48, respectively) and a belt conveyor speed of 38.5m/min, which satisfied the initial design capacity (5.0 ton/hr). Recovery ratio and purity of the plastic films were 92.6% and 96.5%, respectively at a rotation speed of 28 rpm. The levels of noise, vibration and particulate emission were below material standard regulatory limits. Plastic refused fuel (RPF) was also prepared with the recovered films. The calorific value and chlorine content of the prepared RPF were 9,740 kcal/kg and 0.18%, respectively which satisfy the first grade quality specification of the Korean RPF standard. As a result of this work, recovery of energy resources from the municipal solid waste is possible by adopting the developed separation device.

Analysis of Good Agricultural Practices (GAP) in Panax ginseng C.A. Mayer (인삼의 GAP (우수농산물인증) 관련요소 분석)

  • Yu, Yong-Man;Oh, She-Chan;Sung, Bong-Jae;Kim, Hyun-Ho;Youn, Young-Nam
    • Korean Journal of Medicinal Crop Science
    • /
    • v.15 no.3
    • /
    • pp.220-226
    • /
    • 2007
  • For the analysis of hazard factors and the development of GAP (Good Agricultural Practices) Ginseng, 10 ginseng cultural farms wished certified GAP were selected at Geumsan-gun area, a representative site of ginseng cultivation in Korea. In order to verify the safety of GAP ginseng, possible contamination of pesticide and heavy metal residues, and microbial hazard were analyzed. Soil and water around ginseng cultivation field, and ginseng were investigated. Eighty-one pesticides including carbendazim were used as typical pesticide against plant pathogens and insect pests of ginseng plant and general crops. There was no excess the maximum residue limit (MRL) in residue figure of the soil. Including the residue figure of the arsenic (0.81 ml/kg) and 7 other heavy metals was also suitable to cultivate the ginseng plant. The irrigation water and dilution water for pesticide application were also safety level for GAP. Fresh ginsengs from the farms were sampled and investigated pesticide residues and contaminations of bacteria. Among 23 pesticides tested, we didn't detect any kinds of pesticide residues, but tolclofos-methyl was frequently found in the other ginseng field. On the investigation of microorganism hazards, 2 gram negative bacteria and 1 gram positive bacterium were found in the fresh ginseng. Number of total bacteria was $1.5{\times}10^3$ cfu/ml, which was less than the other agriculture products. At these results, 10 selected ginseng farms were good cultural places for GAP ginseng production and the ginseng cultured from Geumsan-gun area were a good safe far human.