• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.332-340
• /
• 2010

In this paper, we deal with multi-user diversity scheduling methods that transmit simultaneously signals from multiple users using superposition coding multiplexing. These methods can make various scheduling methods be obtained, according to strategies for user selection priority from the first user to the first-following users, strategies for per-user power allocation, and resulting combining strategies. For the first user selection, we consider three strategies such as 1) higher priority for a user with a better channel state, 2) following the proportional fair scheduling (PFS) priority, 3) higher priority for a user with a lower average serving rate. For selection of the first-following users, we consider the identical strategies for the first user selection. However, in the second strategy, we can decide user priorities according to the original PFS ordering, or only once an additional user for power allocation according to the PFS criterion by considering a residual power and inter-user interference. In the strategies for power allocation, we consider two strategies as follows. In the first strategy, it allocates a power to provide a permissible per-user maximum rate. In the second strategy, it allocates a power to provide a required per-user minimum rate, and then it reallocates the residual power to respective users with a rate greater than the required minimum and less than the permissible maximum. We consider three directions for scheduling such as maximizing the sum rate, maximizing the fairness, and maximizing the sum rate while maintaining the PFS fairness. We select the max CIR, max-min fair, and PF scheduling methods as their corresponding reference methods [1 and references therein], and then we choose candidate scheduling methods which performances are similar to or better than those of the corresponding reference methods in terms of the sum rate or the fairness while being better than their corresponding performances in terms of the alternative metric (fairness or sum rate). Through computer simulations, we evaluate the sum rate and Jain’s fairness index (JFI) performances of various scheduling methods according to the number of users.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.4
• /
• pp.110-125
• /
• 2017

The Cultural Properties Protection Act enacted 1962 to encourge culture level of people by preserving and using cultural properties introduced Cultural Properties Change Permission System in 2000 in order to cope with rather targeted range towards the national designated cultural properties, and introduced the Guidelines for Permission Standard regarding Construction Activities within the Historical Cultural Environment Preservation Area (2006) to complement permission process and targets, Notification of Minor Changes around the National Designated Cultural Properties (2008), etc and continuously put efforts to improve further ever since. Nonetheless, while it showed decrease in the number of process of change permission per individual cases after 2007, it began to increase again since 2010, reaching 1,554 cases by 2014 - about 29% of the cases being rejected or under observation, people living surrounding of cultural properties still experience inconveniences. This study has been carried out by creating integrated DB with total 7,403 cases of permission status from 5 Subcommittees (Building / Historic Sites / Natural Heritage / Modern Cultural Heritage / Important Folk Culture) in Cultural Heritage Committee that are related with changing status for the past 5 years (2010-2014), and by further analyzing 4,364 cases amongst, that were reviewed within historical and cultural environment preservation area - analyzed applying types and the characteristics, reviewed the improvement plans of operation guidelines for the Committee and acts of minor changes towards surroundings of the national designated cultural properties that regulate the status changing permission targets by categorizing analysis results and deriving implications. I hope that this will complement to the operational guidelines for the Committee, along with minor changing activities around cultural properties in short term, and to secure basic data for systematic improvement plans ie., for delegated works range from city/county/districts through our research. Also hope to improve administrative efficiency by reforming permission systems for building activities in historic cultural environment conservation area, and reduce inconvenience people might experience, by minimizing socioeconomic expense needed for the review.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.203-210
• /
• 2019

Purpose: The purpose of this study was to verify the effect of the abutment superimposition process on the final virtual model in the scanning process of single and 3-units bridge model using a dental model scanner. Materials and methods: A gypsum model for single and 3-unit bridges was manufactured for evaluating. And working casts with removable dies were made using Pindex system. A dental model scanner (3Shape E1 scanner) was used to obtain CAD reference model (CRM) and CAD test model (CTM). The CRM was scanned without removing after dividing the abutments in the working cast. Then, CTM was scanned with separated from the divided abutments and superimposed on the CRM (n=20). Finally, three-dimensional analysis software (Geomagic control X) was used to analyze the root mean square (RMS) and Mann-Whitney U test was used for statistical analysis (${\alpha}=.05$). Results: The RMS mean abutment for single full crown preparation was $10.93{\mu}m$ and the RMS average abutment for 3 unit bridge preparation was $6.9{\mu}m$. The RMS mean of the two groups showed statistically significant differences (P<.001). In addition, errors of positive and negative of two groups averaged $9.83{\mu}m$, $-6.79{\mu}m$ and 3-units bridge abutment $6.22{\mu}m$, $-3.3{\mu}m$, respectively. The mean values of the errors of positive and negative of two groups were all statistically significantly lower in 3-unit bridge abutments (P<.001). Conclusion: Although the number of abutments increased during the scan process of the working cast with removable dies, the error due to the superimposition of abutments did not increase. There was also a significantly higher error in single abutments, but within the range of clinically acceptable scan accuracy.

• Journal of Teachers' Pension
• /
• v.3
• /
• pp.69-105
• /
• 2018

저출산과 고령화 이슈는 우리사회의 경제적 문제뿐만 아니라 공적연금의 재정지속가능성 여부와도 맞물려 있다. 실제로 우리나라 모든 공적연금은 사회보험역설(social insurance paradox)이 지속되기 힘든 새로운 도전에 직면하였다. 즉, 재정지속가능성은 제도 내적 연금개혁 혹은 제도 외적 재정지원이 없다면 항시적 수지불균형 상태가 누적될 것으로 예측된다. 이에 정부는 직접 고용과 관련된 공무원연금과 군인연금에 대해서만 연금충당부채를 산출하도록 규정하고 있다. 발생주의회계를 채택한 국제회계기준(종업원급여)을 참조하여 연금충당부채 산출을 위한 연금회계준칙(2011.8.3. 제정; 2011.1.1. 시행) 그리고 '연금회계 평가 및 공시 지침(2011.8.3. 고시 : 이하 편의상 연금회계지침이라 함)'을 신설하였다. 사학연금에 적용성 여부 논의에 앞서, 이들의 산출방법상의 문제점을 먼저 살펴보았다. 첫째, 공적연금은 공통적으로 세대 간 합의에 의해 운영되는 사회계약에 해당하므로 제도의 연속성을 전제로 한다. 하지만 연금회계준칙 및 지침은 제도의 청산을 전제로 현재 가입자(연금 미수령자, 연금 수령자)에 대해서 연금충당부채를 산출하는 폐쇄형측정(closed group valuation)을 채택하고 있다. 즉, 폐쇄형은 제도의 연속성 속성을 반영하고 있지 못하고 있어 기본 전제와 모순된다. 둘째, 공무원연금과 군인연금은 이미 기금 소진(최소한의 유동성기금만 보유함)이 되었고 정부의 보전금에 의해 수지 균형이 유지되는 순수부과방식 체계로 전환되었다. 따라서 연금충당부채는 해당 적립기금의 과소 여부를 판정하는 재정상태 기준 값에 해당하므로 기금소진이 진행된 현 상황에서는 산출의 목적, 필요성을 찾기가 힘들다. 부언하면, 제도 외적 재정지원(보전금)에 의한 수지균형방식이라면 발생주의회계보다는 현금주의회계가 회계의 목적적합성이 높다. 마지막으로 연금충당부채 산출에 있어 가장 민감한 할인율 설정 권한을 기재부장관에게 위임한 내용은 산출의 객관성, 일관성을 확보하기 힘들다고 판단된다. 이를 해소하기 위한 방안으로 본 연구에서는 5년마다 실시하고 있는 장기재정계산에서 예측된 명목 기금투자수익률을 연도별로 적용할 것을 권고하고 있다. 현행 정부회계기준을 사학연금제도에 그대로 적용하기에는 상당한 무리가 있다. 그 이유와 공시방안에 대해 살펴본다. 현재 사학연금은 기금소진 이슈로부터 상당부분 벗어나기 위해 2015년 연금개혁을 단행한 바가 있고 이를 통해 상당기간 부분적립방식 체계가 유지될 것이다. 물론 제도 외적 재정지원은 사학연금법 제53조의7에서 정부지원의 가능성만을 열어 놓은 상태이므로 미래기금소진의 가능성은 상존한다고 볼 수 있다. 먼 미래에는 순수부과방식 체계로 전환될 개연성이 높다. 이러한 재정의 양면성을 본 연구에서는 이중재정방식(dual financing system)이라고 한다. 이러한 속성을 고려하여 연금충당부채(연금채무라는 표현이 적합할 것으로 사료됨)를 산출하고 공시하여야 한다. 그 주요 연구 결과는 다음과 같이 요약된다. 먼저 현행 부분적립방식의 재정상태 검증을 위해 연금채무를 산정할 필요성이 있다. 이를 위해 본 연구에서는 기발생주의(예측단위방식 적용)에 근거한 폐쇄형 측정I(제도 종료를 전제로 현 가입자의 잠재연금채무(IPD) 산출에 초점을 둠) 그리고 미래발생주의(가입연령방식 적용)에 근거한 폐쇄형 측정II(추가적으로 현 가입자의 일정기간 급여 및 기여 발생 허용)을 제안하고 있다. 이를 통해 미적립채무의 규모 그리고 이를 해소하기 위한 상각부담률을 산출할 수 있다. 최종적으로 미래 가입자들까지 포함하고 기금소진 가능성까지 고려하는 개방형측정(open group valuation)을 다루고 있다. 단, 본 연구에서는 공무원연금처럼 기금부족분에 대해서 향후 정부보전금이 있다는 가정 하에 공시 방법을 제시하고 있다. 요약하면, 현행 사학연금제도는 현재와 미래의 재정 양면성을 모두 고려하여 연금채무 및 미적립채무를 공시하여야 한다. 부언하면, 현재 부분적립방식 재정상태를 반영하는 연금채무는 발생주의회계를 적용하고 미래에 도래할 순수부과방식 재정상태는 현금주의회계를 적용할 것을 최종 결론으로 도출하고 있다. 마지막으로 본 연구의 한계는 정부보전금의 가능성에 대한 법률적 해석과 병행하여 책임준비금 범위의 안정적 확대를 전제로 한 공시 논의 그리고 보전금의 책임한도 범위에 따른 공시 논의 등은 다루고 있지 않다는 점이다. 이러한 논의 사항은 향후 연구과제로 두고자 한다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.145-151
• /
• 2013

Purpose: In this study, we analyzed how the dose change by field size effects on atomic number of shielding materials while using 6 MeV election beam. Materials and Methods: The parallel plate chamber is mounted in $25{\times}25cm^2$ the phantom such that the entrance window of the detector is flush with the phantom surface. phantom was covered laterally with aluminum, copper and lead which thickness have 5% of allowable transmission and then the doses were measured in field size $6{\times}6$, $10{\times}10$ and $20{\times}20cm^2$ respectively. 100 cGy was irradiated using 6 MeV electron beam and SSD (Source Surface Distance) was 100 cm with $10{\times}10cm^2$ field size. To calculate the photon flux, electron flux and Energy deposition produced after pass materals respectively, MCNPX code was used. Results: The results according to the various shielding materials which have 5% of allowable transmission are as in the following. Thickness change rate with field size of $6{\times}6cm^2$ and $20{\times}20cm^2$ that compared to the field size of $10{\times}10cm^2$ found to be +0.06% and -0.06% with aluminum, +0.13% and -0.1% with copper, -1.53% and +1.92% with lead respectively. Compare to the field size $10{\times}10cm^2$, energy deposition for $6{\times}6cm^2$ and $20{\times}20cm^2$ had -4.3% and +4.85% respectively without shielding material. With aluminum it had -0.87% and +6.93% respectively and with lead it had -4.16% and +5.57% respectively. When it comes to photon flux with $6{\times}6cm^2$ and $20{\times}20cm^2$ of field sizes the chance -8.95% and +15.92% without shielding material respectively, with aluminum the number -15.56% and +16.06% respectively and with copper the chance -12.27% and +15.53% respectively, with lead the number +12.36% and -19.81% respectively. In case of electron flux in the same condition, the number -3.92% and +4.55% respectively without shielding material respectively, with aluminum the number +0.59% and +6.87% respectively, with copper the number -1.59% and +3.86% respectively, with lead the chance -5.15% and +4.00% respectively. Conclusion: In this study, we found that the required thickness of the shielding materials got thinner with low atomic number substance as the irradiation field is increasing. On the other hand, with high atomic number substance the required thickness had increased. In addition, bremsstrahlung radiation have an influence on low atomic number materials and high atomic number materials are effected by scattered electrons.

• Korean Journal of Organic Agriculture
• /
• v.10 no.3
• /
• pp.87-99
• /
• 2002

The development of insecticidal soaps made by various fatty acids and organic control for insect by using of insecticidal soap(fatty acid salts) were employed. And the results were as follows: 1. To determine the input volume of potassium hydroxide for saponification of fatty acids, there were compared to individual acid value of fatty acids. in case of coconut fatty acids for saponification was 266.3 mg of potassium hydroxide(266 g/1kg of fatty acid) was calculated. 2. To make the 25% soap content by coconut fatty acids, there was required for the 266g of potassium hydroxide and 3,459 liter of soft water. Then the liquor of soap was 4,644 liter. 3. The progress of insecticidal soap made by fatty acids was accomplished indirect heating and stirring reactor (1)to make the volume of potassium hydroxide solution and warming up(90$^{\circ}$) (2)input volume of individual fatty acid (3)more than 30 min stirring reaction (4)cooling progress. 4. Insecticidal value of insecticidal soap was observed more than 92% the dilution of 50 dilution solution in consecutive 5 days of 2 treatments of the 25% soap made by coconut fatty acids on the red pepper. And insecticidal value of insecticidal soap was observed more than 94% the 100 dilution solution in consecutive 5 days of 3 treatments of the 25% soap made by coconut fatty acids on red pepper and cabbage. 5. The treatment of two times of 25% soap made by coconut fatty acids at the 50 dilution solution and 100 dilution solution in spider mite on red bean has 100% insecticidal value. 6. There was no observation phytotoxic sypmtons on red pepper in field, except for 25% soap made by carprylic acid. 7. Over the two times over 0.1% in addition of isopropyl alcohol was to improvement the insecticidal effect, but there was no effect in addition of diatomaceous earth.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.26-29
• /
• 2011

Purpose: The general test method of the Korean Pharmacopeia specifies the test method on the clauses of quality control after manufacturing. According to KFDA Guidance for Medicines, standards of residual solvents regulates the maximum permissible dose of acetonitrile as 400 ppm, ethanol as 5,000 ppm, and acetic acid as 5,000 ppm. This study aims at identifying the type of resiual solvents in the final [F-18]FDG vial of an automatic synthesizer and measure its residual quantity. Materials and Methods: The center carried out residual solvents test of [F-18]FDG injection using Agilent Technologies 7890A with a Flame Ionization Detector. The column of Agilent Technologies 7890A used in measuring of residual solvents was CP WAX column ($30m{\times}0.53mm{\times}1.0{\mu}m$) and analysis condition was split mode 1:1 at the initial temperature $70^{\circ}C$ which was increased $20^{\circ}C/minute$ after two minutes and maintained at the final $140^{\circ}C$ for two minutes. The analysis method was as following: Firstly, ethanol-acetonitrile-acetic acid mixture was classified into four types of concentration (250-25-250 ppm, 1,000-100-1,000 ppm, 3,000-300-3,000 ppm, and 6,000-600-6,000 ppm), and $1.0{\mu}L$ of each type of concentration was injected into gas chromatography followed by an analysis of its peak domain. Then, a calibration-curve by the external standard method was drawn based on the analysis result. Results: While ethanol and acetonitrile were detected in TRACERlab MX, FASTlab had additional acetic acid. The residual quantity of the ethanol-acetonitrile-acetic acid mixture evaluated using the calibration-curve was average 72 ppm ethanol, 54 ppm acetonitrile, and 1030 ppm acetic acid for FASTlab, whereas average 439 ppm ethanol and 79 ppm acetonitrile for TRACERlab MX. This indicated that both of them were within the maximum permissible dose. Conclusion: Solvent residues in the [F-18]FDG injection were all within maximum permissible doses and proper to be used to examine a patient. The result indicated that types and quantities of solvent resides of radioactive pharmaceuticals vary depending on the automatic synthesizer.

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.273-282
• /
• 2011

This study established hazards which may cause risk to human at farm during cultivation stage of paprika. Samples of plants (paprika, leaf, stem), cultivation environments (water, soil), personal hygiene (hand, glove, clothes), work utensils (carpet, basket, box) and airborne bacteria were collected from three paprika farms (A, B, C) located in Western Gyeongnam, Korea. The collected samples were assessed for biological (sanitary indications and major foodborne pathogens), chemical (heavy metals, pesticide residues) and physical hazards. In biological hazards, total bacteria and coliform were detected at the levels of 1.9~6.6 and 0.0~4.610g CFU/g, leaf, mL, hand or 100 $cm^2$, while Escherichia coli was not detected in all samples. In major pathogens, only Bacillus cereus were detected at levels of ${\leq}$ 1.5 log CFU/g, mL, hand or 100 $cm^2$, while Staphylococuus aureus, Listeria monocytogenes, E. coli O157 and Salmonella spp. were not detected in all samples. Heavy metal and pesticide residue as chemical hazards were detected at levels below the regulation limit, physical hazard factors, such as insects, pieces of metal and glasses, were also found in paprika farms. Proper management is needed to prevent biological hazards due to cross-contamination while physical and chemical hazards were appropriate GAP criteria.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.1
• /
• pp.25-38
• /
• 2003

This study was conducted to establish the microbiological quality standards applying the HACCP system on sushi items of Japanese restaurant in Korea. The study evaluated hygienic conditions of kitchen and workers, pH time-temperature relationship, and microbial assessments during whole process of sushi making in 2001. Overall hygienic conditions were normal for both kitchen and for workers by 3 point scale, but hygienic controls against the cross-contamination were still needed. Each process of sushi making was performed under the risk of microbial contamination, since pH value of most of ingredients was over pH 4.6 and also production time(3.5~6 hrs) were long enough to cause problems. Microorganisms were high enough to cause foodborne illness ranged 8.0$\times$10$^2$~3.3$\times$10$^{6}$ CFU/g of TPC and 1.0$\times$10$^1$~1.6$\times$10$^3$CFU/g of coliforms, although TPC, coliforms and Staphylcoccus aureus were within the standard limits (TPC 10$^2$~10$^{6}$ CFU/g, coliforms 10$^3$CFU/g). However, Salmonella and Vibrio parahaemolyticus were not detected. High populations TPC and coliforms were also found in the cooks' hands and cooking utensils(TPC 10$^2$~10$^{6}$ CFU/100cm$^2$and Coliforms 10$^1$~10$^3$CFU/100cm$^2$). Based on the CCP decision tree analysis, the CCPs were the holding steps far six sushi production line except the tuna and the thawing step for tuna sushi. In conclusion, overall state of sushi production was fairly good but much improvement was still needed.

• Journal of Preventive Medicine and Public Health
• /
• v.19 no.1 s.19
• /
• pp.16-30
• /
• 1986

In order to prepare the fundamental data for the improvement of noisy working environments and the effective hearing conservation program on workers exposed to industrial noise, the authors surveyed the working processes and evaluated the noise levels on 56 manufacturing industries in Pusan area from April to July in 1985. The results were summarized as follows : 1. The noise level was the highest in shipbuilding and repairing(95.6 dBA), and followed by steel rolling(94.0 dBA), manufacture of motor vehicles(93.1 dBA), manufacture of fishing nets(92.9 dBA), manufacture of testiles(92.5 dBA), iron and steel foundries(89.3 dBA), manufacture of metal products(89.1 dBA), preserving and processing of marine foods(87.0 dBA), manufacture of rubber products(85.3 dBA), manufacture of plywood(84.9 dBA) and manufacture of paints(84.5 dBA). 2. Among fifty surveyed working processes, the noise level of twenty-one processes (42%) exceeded the threshold limit value for 8 hours per day. 3. As the allowable exposure times by governmental threshold limit values to industrial noise level(dBA), cocking of shipbuilding and repairing and plating(CGL) of steel rolling were the shortest(30 minutes), and followed by assembling(rivet) of manufacture of motor vehicles(1 hour) weaving of manufacture of textiles and shot, machine, pipe laying of shipbuilding and repairing(2 hours). 4. By the result of octave band analysis on noisy working processes in excess of 90 dBA, the sound level was the highest at 2,000 Hz or 4,000 Hz. 5. It was recognized that the measurement of overall sound pressure level was also effective as octave band analysis in evaluating the industrial noise.