• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.541-550
• /
• 2013

Generally in case of tablet PC's, the Windows 8 is used to support various functions or development convenience, however it cannot support real-time processing. In addition, existing commercial solutions and RTiK has a problem to support real-time processing due to impossibility of getting APIC timer count value which is used to generate timer interrupt separated from that of Windows. Thus, in this paper, we set the initial APIC count value using MSR_FSB_FREQ to support real-time processing on the Windows 8-based tablet PC's. Additionally, we deal with designing and implementing RTiK+ providing real-time processing to guarantee interrupt periods by controlling C-State which is used for low power techniques. To evaluate the performance of the proposed RTiK+, we measured the periods of generated real-time threads using RDTSC instructions which return the number of CPU clock ticks, and verified that RTiK+ operates correctly within the error ranges of 1ms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1973-1980
• /
• 2017

In the case of a small UUV operating an active synthetic aperture sonar, various velocity disturbances may occur on the path due to the influence of external underwater environment, and this causes phase errors in coherent synthetic aperture processing, which has a large influence on the detected image. In this paper, when a periodic sinusoidal velocity disturbance is generated in the traveling direction, the phase generated by the round trip slope range at each position is estimated the cross correlation coefficient for multiple received signals and compensated the position variation in the overlapped DPC by the average value within the maximum allowable width. Through simulations, it has been confirmed that the images degraded by the velocity disturbance amplitude and fluctuating frequency of the UUV are removed from the false targets and the performance of azimuth resolution is improved by the proposed phase compensation method.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.7
• /
• pp.340-353
• /
• 2008

A computational color palette extraction model is introduced to describe paint brush objectively and efficiently. In this model, a color palette is defined as a minimum set of colors in which a painting can be displayed within error allowance and extracted by the two step processing of color grouping and major color extraction. The color grouping controls the resolution of colors adaptively and produces a basic color set of given painting images. The final palette is obtained from the basic color set by applying weighted k-means clustering algorithm. The extracted palettes from several famous painters are displayed in a 3-D color space to show the distinctive palette styles using RGB and CIE LAB color models individually. And the two experiments of painter classification and color transform of photographic image has been done to check the performance of the proposed method. The results shows the possibility that the proposed palette model can be a computational color analysis metric to describe the paint brush, and can be a color transform tool for computer graphics.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.127-138
• /
• 2011

This study aimed at suggesting the possibility of an application that connects cadastral control point and urban control point. In order to do this, we calculated and analyzed the cadastral coordinate on urban control point by using the GPS observation data of Changwon-si urban control point (32 points) which was announced based on the result of global coordinate system. We calculated cadastral coordinate through using three different kinds of calculation S/Ws, and compared the results of the calculation with the preexisting result of urban control point. The comparison suggested that the gap between the new results and the existing results is in the range of error specified by a law. Therefore, the result can be used in cadastral surveying. However, for the safe application in practical works, we suggested that it would be better to carry out new cadastral surveying and use its result than to use the result of the current urban control point directly in surveying cadastral. In addition, we suggested that it is necessary to examine precisely the local station of triangulation. Finally, we recommended that one should use trilateral network adjustment S/W as one's calculation S/W.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.5
• /
• pp.443-451
• /
• 2006

DEM has been used for various purposes overall fields of engineering, the fields of civil engineering, military, communication, environment, and so forth and its applications are being extending increasingly. It is well hewn that LiDAR DEM is definitely superior to the other surveying methods. But LiDAR DEM run short of a full study about vertical accuracy. In order to assess LiDAR DEM, total 35 stations were selected and surveyed by GPS for utilizing as reference data. And then accuracy of LiDAR DEM was analyzed by comparison between both LiDAR DEM and CPS surveying. The RMSE of ${\pm}0.109m$ was shown in vertical direction. It is within the permissible accuracy required for mapping on a scale of 1 to 500 and 1 to 1000 on the mapping rule notified by the National Geographic Information Institute. It is expected that the results of this study will be fully used in the field of large scale DEM generation and be utilized as basic information in applied field of LiDAR DEM.

• Journal of the Korean Society of Radiology
• /
• v.10 no.4
• /
• pp.263-270
• /
• 2016

This paper suggests techniques to enhance coding time which is a problem in traditional fractal compression and to improve fidelity of reconstructed images by determining fractal coefficient through adaptive selection of block approximation formula. First, to reduce coding time, we construct a linear list of domain blocks of which characteristics is given by their luminance and variance and then we control block searching time according to the first permissible threshold value. Next, when employing three-level block partition, if a range block of minimum partition level cannot find a domain block which has a satisfying approximation error, There applied to 24-bpp color image compression and image techniques. The result did not occur a loss in the image quality of the image when using the encoding method, such as almost to the color in the YIQ image compression rate and image quality, such as RGB images and showed good.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.206-211
• /
• 2005

We describe the design for a correlator and an access code generator in bluetooth system. These are used for a connection setting, a packet decision and a clock synchronization between Bluetooth units. The correlator consists of two blocks; carry save adder based on Wallace tree and threshold-value decision block. It determines on an useful packet and clock-synchronization for input signal of 1.0Mbps through the sliding-window correlating. The access-code generator also consists of two blocks; BCH(Bose-Chadhuri-Hocquenghem) cyclic encoder and control block. It generates the access-codes according to four steps' generation process based on Bluetooth standard. In order to solve synchronization problem, we make use of any memory as a pseudo random sequence. The proposed correlator and access-code generator were coded with VHDL. An FPGA Implementation of these modules and the simulation results are proved by Xilinx chip. The critical delay and correlative margin based on synthesis show the 4.689ns and the allowable correlation-error up to 7-bit.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.687-693
• /
• 2009

An algorithm and a computer software are developed for the analysis of rail potential rise. The algorithm is intended to be integrated with the traction power system simulation program. In the algorithm, rail potentials are obtained by two step process. First the injection currents to the negative rail are obtained from load-flow study. In the next step, a network consisting of negative rail and the injection currents are constructed. Leakage resistance to ground are added to the network. And the network is analyzed for rail potentials. A software is developed to verify the validity of the algorithm. The result of the software is compared with the Simulink/SymPower circuit analysis result. The differences between the two results are with the acceptable range. The advantage of this algorithm is that it can be integrated with the existing traction power supply simulation program easily, which usually ignores negative rail's leakage resistance.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.254-260
• /
• 2005

By incorporating large core polymer waveguides, which have been developed for increased alignment tolerance in passive fiber attachment, highly efficient variable optical attenuators are proposed. In order to find optimum device structures, 3-dimensional beam propagation method (BPM) simulations are performed. Heat distribution over the polymer film is calculated to find the 3-dimensional index profile data for the BPM simulation. Due to the small index contrast between the core and cladding materials in the large core waveguide, heat-induced radiation occurs for small heating power. While the ordinary VOA needs the temperature to change over $150^{\circ}C$ for 20 dB attenuation, the large core VOA requires only $70^{\circ}C$. In addition to the merit of passive fiber attachment, the proposed VOA has enhanced attenuation efficiency for the lower temperature change.

• The Journal of Korean Society for Radiation Therapy
• /
• v.7 no.1
• /
• pp.32-44
• /
• 1995

I. 제 목 고에너지 X-선 소조사야의 선량분포 및 계측에 관한 연구 II. 연구의 목적 및 중요성 최근 수술이 어려운 뇌종양등에 대한 방사선수술법(Radiosurgery)이 관심의 대상이 되고 있다. 방사선수술법은 크게 나누어 200여개의 Co-60이 장착된 장치(Gamma Knife)를 이용하는 방법과, X-선치료기를 이용하는 방법은 몇개의 보조기구를 설치하면 가능한 매우 경제적인 방법이다. 따라서 Microtron을 이용한 방사선수술의 기초자료확보를 위하여 소조사야에 대한 선량과 선량분포의 측정 및 계산을 실시하였다. III. 연구의 내용 및 범위 Microtron으로부터 조사되는 6MV, 10MV, 21MV X-선의 지름 3cm이하 소조사야에 대한 정확한 선량 및 선량분포 자료를 확보하기 위해, 가. Microtron치료기와 보조장치등에 대한 정밀도 계측 및 평가 나. 보조 Collimator의 적당한 크기와 재료의 선택 및 설계, 제작. 다. 에너지와 조사야 크기 각각에 대한 여러측정장치(Ion chamber, Diode detector, TLD 및 Film등)를 이용한 선량 및 선량분포 측정. 라. 측정값들의 비교, 검토 및 측정된 자료에 의한 선량 및 선량분포의 계산을 수행했다. IV. 연구결과 및 활용에 대한 건의 본 연구에서 얻은 결과는 다음과 같다. 가. Microtron치료기와 보조장치등의 정확도의 허용 오차범위내에서 잘 일치하였다. 나. 보조 collimater adpator는 총 길이 24cm로 하였으며 재질로는 두랄미늄을 사용하였고, 보조 collimator는 low melting alloy를 사용하였으며 소조사야 크기의 정확도는 0.5mm이내에서 매우 잘 일치 하였다. 다. 방사선 수술법의 에너지 선택에 중요한 요소중의 하나인 penumbra는 6MV X-선에서 가장 적게 나타났으며 라. 소조사면에 대한 깊이-선량 백분율곡선은 모든 에너지에서 조사면이 작아질수록 표면으로 이동하는 경향을 보였다. 이상의 결과로부터 방사선 수술을 시행할 경우 수십억원에 이르는 장비의 도입이나 새로운 시설 없이 Microtron에서 조사되는 고에너지 X-선을 이용할 수 있을 것으로 사료된다. 또한 새로 구입한 측정기나 보조 Collimator를 이용하여 소조사야에 대한 선량측정기술을 습득함으로써 일반적인 소조사야의 방사선치료나 회전치료등에 활용할 수 있다.