• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.163-168
• /
• 1992

Results of magnetic measurement of a prototype Storage Ring dipole magnet for the Pohang Light Source (PLS) are summarized. Hall probe mapping and rotating coil methods are used to measure field profiles and integrated field properties. End chamfering experiments are performed on the as-built magnet, which has four removable pole-end pieces, to meet the specifications set from beam dy-namics requirement. The corrected magnet has efficiency of 99.7% at 2.0 GeV excitation ad higher order multipole error levels less than the specifications for all excitations, showing that the magnet has appropriate properties for the PLS Storage Ring.

• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.176-185
• /
• 2005

Purpose: Film dosimetry as a part of patient specific intensity modulated radiation therapy quality assurance (IMRT QA) was peformed to develop a new optimization method of film isocenter offset and to then suggest new quantitative criteria for film dosimetry. Materials and Methods: Film dosimetry was peformed on 14 IMRT patients with head and neck cancers. An optimization method for obtaining the local minimum was developed to adjust for the error in the film isocenter offset, which is the largest part of the systemic errors. Results: The adjust value of the film isocenter offset under optimization was 1 mm in 12 patients, while only two patients showed 2 mm translation. The means of absolute average dose difference before and after optimization were 2.36 and $1.56\%$, respectively, and the mean ratios over a $5\%$ tolerance were 9.67 and $2.88\%$. After optimization, the differences in the dose decreased dramatically. A low dose range cutoff (L-Cutoff) has been suggested for clinical application. New quantitative criteria of a ratio of over a $5\%$, but less than $10\%$ tolerance, and for an absolute average dose difference less than $3\%$ have been suggested for the verification of film dosimetry. Conclusion: The new optimization method was effective in adjusting for the film dosimetry error, and the newly quantitative criteria suggested in this research are believed to be sufficiently accurate and clinically useful.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.433-437
• /
• 2003

고해상도 위성영상을 이용하여 수치표고모델(DEM) 및 정사영상을 제작해서 수치지도의 갱신 및 지형공간정보체계의 자료기반으로써 활용할 수 있다. 본 연구에서는 Sobel 연산자를 이용하여 경계추출을 행한 후 스크린 디지타이징 방법으로 경계선을 추출하였다 이렇게 추출된 벡터자료와 기존수치지도와의 중첩을 통해서 건물, 도로, 임야의 평균위치오차를 분석해 보았다. 평균위치오차가 공공측량의 작업규정에 대한 1 : 5,000 수치지도 제작의 허용오차범위에는 들지 못하였지만, 특정 부분의 지형·지물의 경우에는 수정, 보완이 가능한 것으로 나타났다. 그리고, 산악지역 보다는 도심지에서의 경계추출이 뚜렷하기 때문에 위치정밀도가 향상됨을 알 수 있었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.523-525
• /
• 1998

웨이브렛 변환을 사용한 영상은 인간의 시각체계(HVS)에 적적한 양자화 및 부호화를 위한 계층적 구조를 제공한다. 인간의 시각이 민감하게 감지하는 부분을 더 정확하게 부호화 하고, 그렇지 못한 부분에서는 적절한 정보의 손실을 허용하는 원리를 이상적으로 적용할 수 있다. 이런 웨이브렛 변환영상의 통계적 특성을 이용한 제로트리 부호화 기법은 중요한 영상계수를 선별하여 영상전체에서 의미있는 계수를 순서대로 부호화 함으로써 매입 파일(Embeded File)을 생성한다. 본 연구에서는 제로트리 부호화 과정중 불확실 구간(Uncertainty Interval)에서 발생하는 오차(Error)를 줄이기 위하여 LBG(Line Bute Gray) 알고리즘을 도입하여 최적의 오차 코드북을 생성한 후 복원시 사용함으로써 결과의 향상을 보였다. 오차교정(Error Correction)은 EZW(Embeded Zerotee Wavelet) 부호화 과정에서 손실되기 쉬운 고주파수 밴드에 적용하여 복원시 영상의 자세한(detail) 성분을 살리는데 효과적이다. JPEG과 같은 DCT 기반 영상압축 결과에 비하여 화질에서 더 좋은 성능을 보일뿐아니라, DCT 특유의 블록화 현상도 제거되었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.189-196
• /
• 2005

Recently as map making skills developed and as digital maps prevailed, peoples began to take interest in the realistic 3dimension topography rather than the flat 2 dimension one. The experiment is done by using the topographical information from the digital maps, To analyze the preciseness of this 3dimension topography, analysis of the coordinate-changed standard map image and the location errors of the plane and height from digital values of the map's topography by layers and features, were done. The visual results of locational values differed by every programs of coordinate transformation. Errors of locations also appeared from the methods of correcting the visual sources, when deciding the standard source's datum point. The plan's accuracy of the image data coordinate transformation is about ${\pm}4.1m$. In ground distance, therefore, it is included in the allowed error of the 1:25,000 scale changed map, satisfying the plan's accuracy. Also, by the use of reasonably spaced grid, it satisfied the visual topographical accuracy. Because the 3 dimension topographical map can be produced effectively and rapidly by using various scale's standard map image and the digital map, the further practical use of 3 dimension topographic map made by using the existing topographies and changed maps has high expectations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.168-177
• /
• 2003

The performance sensitivity analysis due to manufacturing/alignment errors is performed for the Ku-band offset parabola antenna of the domestic Communications and Broadcasting Satellite. The performance variations due to reflector random surface error, which inevitably happens during reflector manufacturing, are statistically analyzed using RMS error and correlation interval. The impact on the antenna performance of the fred hem's position and angular errors is investigated, and the sensitive directions are identified. When the target tolerances are applied, the performance degradations are found to be within the loss budget or corresponding performance margins.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.1
• /
• pp.86-93
• /
• 2002

In this study, numerical experiments were performed to decide the proper size off finite element for the analysis of harbor resonance problems. Various sizes of finite elements were considered from 1/3 to 1/60 of wavelength to model a fully opened rectangular harbor. Through the numerical results, the proper number of finite elements per wavelength were revealed to be nine within two percents errors allowed in resonant period and amplification ratio, while twelve within one percent error. It was fecund that error rates of resonant periods decrease linearly, while those of amplification ratio decrease with oscillating form as the size of an element decreases. The error of amplification ratio increases more rapidly than that of resonant period in case of element numbers below nine.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.4
• /
• pp.71-84
• /
• 1988

벼 담수 관개 조직에 대한 효율 계산에 있어서 입력은 관개수량과 총 강우량이고 출력은 증발수 및 급유유실의 합이 된다. 그러나 최근에는 입력을 관개수량으로 출력은 증발수 및 급유유실로 부터 유교 우량을 뺀 값으로 정의하고 있다. 비록 후자의 방법이 전자보다는 실제 논 조건에 부합된 계산방법이기는 하지만 아직도 허용침수심 유지에 필요한 관개수량, 각종 생육기에서의 침수심의 변화, 분배방법에 따른 침수심의 차이 등이 고려되지 않고 있다. 본 연구에서는 이와 같은 벼 관개효율 계산의 단순화가 포장관개효율의 정도와 적정도의 어떠한 영향을 미치는가를 검사하고 그러한 효과의 크기와 성질을 다음과 같이 2단계로 조사하였다. 첫째, 논에서의 일별물수지조건을 기본으로 하여 관개효율 계산모형이 개발되었으며 이전 효율계산에서 생략된 모든 요인이 고려되었다. 둘째, 개발된 모형을 이용하여 포장관개효율을 계산하고 그 결과를 재래방법으로 계산된 값들과 비교하였다. 본 연구는 아직까지 불충분한 것으로 간주되어 왔던 논 관개조직의 포장관개효율에 대한 몇 가지 흥미 있는 의제를 밝힌 것으로 기본 자료는 1985년 반월관개지구에서 수집된 것을 이용하였다. 1. 계산모형은 포괄적인 것으로 어떤 지방의 수집자료라도 적용할 수 있다. 모형의 계산결과를 볼 때 관개효율과 소비수량 사이에 접근된 경향을 보여줌으로써 모형개발에 잘 충족시켜주고 있는 것으로 판단된다. 2. 모형에서의 계산시간간극은 제한적이지는 않지만 중요하며, 비교분석이 관련된 경우에는 주의하여 문제를 선택해야 한다. 계산결과를 보면 짧은 시간간격이 관개효율이 아주 크거나 작은 기간을 더 잘 반영하는 것으로 나타났다. 3. 논의 포장관개효율을 계산함에 있어서 각 관개기의 초기 침수량과 허용 침수심을 무시한 효율계산은 큰 오차를 나타냈다. 반월관개지구에서 주간 포장관개효율은 -58%~16%로 오차범위가 관측되었다. 4. 논의 침수량 및 허용 침수량을 고려한 것과 고려하지 않은 것 사이의 상이성이나 유의적인 관계는 없었다. 그러나 연구 결과에 의하면 전자의 방법이 효율 측정에 있어서 더 적합한 것으로 판단되었다. 5. 개발된 모형은 논 관개의 물리적 측면과 관리목표 모두를 고려한 것으로 계산된 효율은 벼, 생육 각 단계에서의 효율 비교에 양호한 방법임을 알 수 있다.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.692-702
• /
• 2017

Recently, there has been a growing interest in using smart card data. However, there are restrictions on the utilization of data in many areas outside the Seoul metropolitan area because the data does not contain alighting information. This paper presents a methodology for estimating alighting stops of smart card data. Estimation results were verified by smart card data from Seoul and Gwangju. The estimation rates were 78.2% and 81.6% in Seoul and Gwangju, respectively. The matching accuracy was 54.2% and 33.4%, respectively. However, if up to two stops of error are allowed, the accuracy values were 93.6% and 94.0%, respectively. We also discussed changes in estimation results due to adjusting the allowable walking distance, which is a key parameter of trip chaining methods. As the allowable walking distance increases, the estimation rate increases, while the accuracy decreases, and it is found that the estimation results change by around 500m.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.119-126
• /
• 2003

The size of low voltage level conductor cables can be installed with a long length just like a aviation field, shall be determined for considering the ampacity of cable and the drop of voltage for the power system. Therefore, The size of the conductor cables may be larger one for considering the tolerable voltage drop comparatively, although the allowable ampacity of the conductor cables may have a margin in comparison with the rated full load current In this case, the conductor cables' allowable ampacity will be very larger than the rated full load current and the generated heat of the conductor will be relatively downed. The conductor cables' alternating current resistance corrected with the maximum allowable temperature of the conductors, has been applied on the general formula for the calculating the voltage drop in determinating the size of low voltage level conductor cables, and the resistance is larger than the resistance corrected with the actual temperature of the conductor cables. This paper was studied for the purpose of the conductor resistance corrected with the actual temperature rise of the conductor and address the economic design formula so that this studies shall minimize the errors which can be occurred in comparison with the general formula and which can be applied in design work for determining the size of low voltage level conductor cables.