• The Journal of the Korea Contents Association
• /
• v.1 no.1
• /
• pp.68-73
• /
• 2001

The interaction between web site and it's user is more active and free than that of any other interface environment. Consequently, it is very important that user interface environment must be fully considered in web site development process. In this study, first, web interface environment and it's features are examined, then web usability test techniques are analyzed, and on the basis of the results, new tool for visualizing various responses and patterns of web site user is developed. Finally, by applying newly developed tool to usability test process of an internal hub site and analyzing the results, effective methods for visualization and evaluation of using patterns of web site are suggested.

• New & Renewable Energy
• /
• v.5 no.2
• /
• pp.3-8
• /
• 2009

Tidal current power system is one of ocean renewable energies that can minimize the environmental impact with many advantages compared to other energy sources. Not like others, the produced energy can be precisely predicted without weather conditions and also the operation rate is very high. To convert the current into power, the first device encountered to the incoming flow is the rotor that can transform into rotational energy. The performance of rotor can be determined by various design parameters including numbers of blade, sectional shape, diameter, and etc. The stream lines near the rotating rotor is very complex and the interference effects around the system is also difficult to predict. The paper introduces the experiment of rotor performance and also the fundamental study on the characteristics of three different rotors and flow near the rotor by CFD.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.1
• /
• pp.10-14
• /
• 2001

The volatile components of umbelliferous herbs having a characteristic spicy aroma were investigated. The essential oils of herbs were isolated by simultaneous steam distillation and extraction and the volatile components were identified by capillary GC and GC/MS. Forty-nine volatile compounds were identified from the herbs. The major compounds of chervil (Anthricus cerefolium) leaf oil were methyl chavicol, 1-allyl-2,4-dimethoxy benzene, and of coriander (Coriandrum sativum) leaf oil were ${\beta}$-sesquiphellan drene, germacrene B, nerolidol, selinene-4-ol, and of coriander seed oil were linalool, decanal, ${\gamma}$-terpinene, $\rho$-cymene.

• Microbiology and Biotechnology Letters
• /
• v.35 no.3
• /
• pp.220-225
• /
• 2007

In order to develop a potent antidandruffy agent from medicinal plants, various extracts of medicinal plants and herbs were prepared and investigated its antifungal activity against Malassezia furfur. Among 85 kinds of the secondary screened medicinal plants and herbs, water extract of Chrysanthemum zawadskii had the highest antifungal activity against dandruffy-producing Malassezia furfur. The antifungal compound was also maximally extracted when the powder of Chrysanthemum zawadskii was treated with water at $50^{\circ}C$ for 6 hours. The antifungal compound from Chrysanthemum zawadskii was partially purified by silica gel column chromatography and the partial purified compound was soluble at $70^{\circ}C$ for 20 min and pH $3.0{\sim}9.0$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1126-1134
• /
• 2004

This research is targeted on developing an advancing model for 4 provinces of Jeollabuk-Do, Jeollanam-Do, Gangwon-Do, and Jeju Island that are relatively underdeveloped in regard to various infrastructures, on causing balanced development of this country (South Korea) by making those provinces undertaking a part of growth power in the next generation, and accordingly, on helping this country (South Korea) to emerge as a heart of north-east countries in economy. This research at first focuses on Jeollabuk-Do as considering the geographical and economical characteristics, has an effort to contrive an advancing model of culture-information industry, and then, if successfully souled down, is enlarged to the other underdeveloped provinces in developing advancing models.

• Journal of Digital Contents Society
• /
• v.2 no.1
• /
• pp.31-40
• /
• 2001

Currently there are many standards of network management. They are: SNMP(Simple Network Management Protocol - for Internet management), CMIP(Common Management Information Protocol - standardized by ITU-T and ISO), RMON(Remote network MONitoring - for distributed management of the LAN segment), and so on. Especially RMON has created the many concerns in order to manage subnetworks of a large network, but it has negative aspects. For instance, routers or hubs with RMON capability are expensive to a network manager because of adding heavy management cost. Moreover it imposes a heavier burden on network manager, because it must use a network management tool which will be additionally needed with RMON device. This paper proposes a model of PC based RMON Agent system. The RMON Agent system monitors the traffic on LAN segment through the use of a Virtual Device Driver(VxD), based on PC. In term of cost this model will replace the expensive RMON device, and eventually enable a network manager to manage LAN segment more efficiently, due to reduced cost.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.39-46
• /
• 2005

In this paper, adaptive higher harmonic control technique using Neural Networks (NN) is proposed. First, linear transfer function is estimated to relate the input harmonics and output harmonics, then NN which has the universal function approximation property is applied to expand application range of the transfer function. Optimal control gain matrix computed from the transfer function is used to train NN weights. Online weight adaptation laws are derived from Lyapunov's direct method to guarantee internal stability. Results of the simulation of 6-input 2-output nonlinear system show that adaptive HHC is applicable to the system with uncertain transfer function.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.115-120
• /
• 2014

In this study, a module is developed for modeling and analyzing dynamic behavior of a wind turbine using RecurDyn, which is a commercial multi-body dynamics software developed by FunctionBay, Inc. The wind turbine consists of tower, nacelle, hub and blades. Tower and blades are regarded as flexible bodies for considering elastic effect using beam theory and spring force. In this paper, a constant speed wind was assumed and aerodynamic force is modeled using BEM theory. Dynamic analysis applying this aerodynamic force is carried out. To verify the validity of analysis results, these results are compared to those of GH-Bladed which is a commercial software for analyzing wind turbine system distributed by Garrad Hassan.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.145-172
• /
• 2007

The goals of this paper are to analyze the present status of logistics on the Dongbei area in China and present implications to the related Korean companies. The mainland of China is very huge, we need to study each regional logistics of China separately. The Dongbei area is more than three times as much as the Korean peninsula, and the population is over two times as much as the two Koreas. Therefore, Korea which is trying to be a logistics hub in Northeast Asia has to pay attention to the logistics of China. This study tries to analyze the logistics of the Dongbei area, but except for the Liaoning province, we needs more information.

• Design & Manufacturing
• /
• v.16 no.3
• /
• pp.16-21
• /
• 2022

In order to reduce the weight of parts and materials for the development of high-efficiency engines in accordance with the strengthening of automobile fuel efficiency regulations, the existing casting material is changed to a iron plate material, and plastic processing and turning operations are performed to lighten the weight and reduce the manufacturing cost. Among the pulley components applied to the damper pulley, the HUB product was manufactured by plastic machining instead of the existing casting process, and the inspection standardized for automating the inner diameter and parallelism measurement of the turning result of the new hub part with improved quality, and the inspection system for this Development of design and operation software to automate the inspection of the inner diameter and parallelism of the hub was described. The representative specifications of the development equipment are a hub inner diameter 22mm inspection system, a three-point inspection system with a parallelism of 0.15mm on the top.