Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

A study on the automatic inspection system for inner diameter and parallelism of automobile hubs

자동차 허브의 내경 및 평행도 자동검사 시스템에 대한 연구

  • Kang, Byung-Soo (Research Institute of Clean Manufacturing System, Korea Institute of Industrial Technology (KITECH)) ;
  • Yoo, Hyeong-Min (School of Mechanical Engineering, Korea University of Technology and Education (KOREATECH))
  • 강병수 (한국생산기술연구원 청정기술연구소) ;
  • 유형민 (한국기술교육대학교 기계공학부)
  • Received : 2022.06.17
  • Published : 2022.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

In order to reduce the weight of parts and materials for the development of high-efficiency engines in accordance with the strengthening of automobile fuel efficiency regulations, the existing casting material is changed to a iron plate material, and plastic processing and turning operations are performed to lighten the weight and reduce the manufacturing cost. Among the pulley components applied to the damper pulley, the HUB product was manufactured by plastic machining instead of the existing casting process, and the inspection standardized for automating the inner diameter and parallelism measurement of the turning result of the new hub part with improved quality, and the inspection system for this Development of design and operation software to automate the inspection of the inner diameter and parallelism of the hub was described. The representative specifications of the development equipment are a hub inner diameter 22mm inspection system, a three-point inspection system with a parallelism of 0.15mm on the top.

Keywords

References

  1. Neung-Gu Lee, Lee-Ku Kwac, Hong-Gun Kim.(2017).A Study on the Universal Outer Diameter Measurement Module using LVDT.Journal of the Korean Society of Manufacturing Process Engineers,16(3),100-106. https://doi.org/10.14775/ksmpe.2017.16.3.100
  2. Ki-Yeol Shin, Seon Hwang.(2015).Development of Contact-Type Thickness Measurement Machine using LVDT Sensors.Journal of the Korean Society of Manufacturing Process Engineers,14(4),151-159. https://doi.org/10.14775/ksmpe.2015.14.4.151
  3. Da Re, G., Santagata, M. C., & Germaine, J. T. (2001). LVDT based system for the measurement of the prefailure behavior of geomaterials. Geotechnical Testing Journal, 24(3), 288-298. https://doi.org/10.1520/GTJ11347J
  4. Hakala, M., Christiansson, R., Martin, D., Siren, T., & Kemppainen, K. (2013). In situ stress measurement with the new LVDT-Cell-method description and verification (No. POSIVA--12-43). Posiva Oy.
  5. Shin, K. Y., & Hwang, S. (2015). Development of Contact-Type Thickness Measurement Machine using LVDT Sensors. Journal of the Korean Society of Manufacturing Process Engineers, 14(4), 151-159. https://doi.org/10.14775/ksmpe.2015.14.4.151