• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.05a
• /
• pp.148-149
• /
• 2003

전 세계적으로 해양으로 유입되는 유류의 유입량은 년간 약 2,350,000 들이며, 대략 15%는 자연적인 유입원이고, 85%는 인위적 유입원으로 유조선 사고, 정유공장, 도시 및 공장 폐수, 자동차 배기가스로 인한 것이다. 유입된 유류는 해양미생물이나 어류, 갑각류 등의 유생, 해양 포유류 등 해양 생물에 피해를 주어 생태계를 파괴시키며 인간의 연안활동이나 어업과 양식에 경제적 피해를 입히기도 한다. (중략)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.314-316
• /
• 2012

울산 현대중공업 해양2공장 H-Dock에서 건조중인 Goliath FPSO의 원활한 입출거를 위하여 기존의 폭 90m인 Dock Gate를 115m로 확장하고, Gate 북측의 기존안벽을 25m 철거하여 신설안벽을 축조하고 있다. 이 연구에서는 H-Dock 전면수역을 이용하는 선박의 통항 안전성을 검증하고, 해상교통현황 조사, 해상교통현황 측정, 해상 이용자 및 전문가 의견수렴을 거쳐 울산항 제1항로를 횡단하여 현대중공업을 입출하는 선박 Block 운반 예부선들의 교통흐름에 미치는 영향을 분석하고, 신설안벽의 전면수역인 M정박지에 입출하는 선박들의 통항안전을 확보하기 위한 종합적인 안전대책을 제시한다.

• 한국해양학회지
• /
• v.9 no.2
• /
• pp.59-64
• /
• 1974

Relative light intensity was observed with underwater illuminometer (Cs Photoelectric cell, glass window) at the mouth of Yeong-il Bay, and relative vertical clearness and extinction coefficient were calculated from the relative light intensity data. Relationship between extinction coefficient and transparency in this region is also shown.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.1-8
• /
• 2000

The time simulation of motion responses of dolphin-moored BMP in waves is presented. The equation of motion based on Cummin's theory of impulse responses are employed, and solved in time domain by using the Newmark $\beta$ method. The hydrodynamic coefficient and first order wave exciting forces involved in the equations are obtained from a three-dimensional panel method in the frequency domain. The second order wave drift forces and mooring for dolphin system are taken into account. As for numerical example, time domain analysis are carried out for a BMP in irregular wave condition.

• Journal of Marine Bioscience and Biotechnology
• /
• v.11 no.1
• /
• pp.14-22
• /
• 2019

Omega-3 fatty acids and carotenoids, which are known as representative high-value substances derived from microalgae, are being studied from various diatoms. Most of the diatoms contain fucoxanthin and omega-3 fatty acid. Fucoxanthin produced by diatom has been reported as bioactive compounds exhibiting strong antioxidant, anticancer and anti-inflammatory activities. However, the low growth rate and fucoxanthin content of diatoms are one of the big obstacles to the industrial application. In this study, indigenous marine diatom Achnanthidium sp. BS-001 was isolated for a candidate of fucoxanthin producer. Light intensity and temperature for the culture of Achnanthidium sp. BS-001 were optimized on PhotoBiobox. Optimization of silicate concentration for increasing BS-001 biomass productivity was confirmed in F/2 medium with various concentration of sodium silicate. As a result, condition of light intensity, temperature, and silicate concentration for optimal cultivation were $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, $18^{\circ}C$ and 0.106 mM, respectively. Maximum biomass productivity reaches to $154.3mg{\cdot}L^{-1}{\cdot}day^{-1}$, and then the content of omega-3 fatty acids and fucoxanthin were $19.4mg{\cdot}g^{-1}$, $9.05mg{\cdot}g^{-1}$, respectively. These results indicate that Achnanthidium sp. BS-001 has the potential to be used as a source of omega-3 fatty acids and fucoxanthin.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.33-40
• /
• 2000

Dispersion of high temperature and high salinity water discharged from a desalination plant is numerically estimated to investigate its impact on marine environment. The plant is installed on a floating barge located in Jinhae Bay and takes 200 tons of seawater per day. Fifty tons of intake are changed into fresh water, while 150 tons of those are discharged as the water of 15℃ warmer and 1.33 times saltier than surrounding seawater. In this dispersion model, advection is described by two-dimensional tidal currents and turbulent diffusion is simulated by Monte Carlo technique. Decay of water temperature is modelled by heat exchange between the atmosphere and the ocean, while decay of water salinity is ignored. The distributions of temperature and salinity come to equilibrium when the dispersion model is run for 100 days for temperature and for 365 days for salinity, respectively. At equilibrium state the water temperature and salinity rise 0.01℃ and 0.001‰ higher than ambient seawater, respectively.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.138-139
• /
• 2001

우리나라의 남해안에 산재되어 있는 멸치젓갈 가공공장의 멸치액젓의 가공공정을 보면 숙성된 멸치젓에서 액젓을 착즙한 후에 남는 발효잔사는 25％내외의 염수를 혼합하여 다시 2차 발효시킨 후에 2차액으로 분리하여 제품으로 재이용되고 있다. 그러나 그후 발생하는 멸치액젓 발효잔사는 13％이상의 높은 단백질을 함유하고 있으나 높은 식염함량으로 인해 식품소재로의 적절한 전환없이 폐기되거나 일부는 사료로 이용되고 있는 실정이다. (중략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.8-15
• /
• 1998

1. 서론 : 중국에서 분리막에 관한 연구는 1965년부터 역삼투막에 관한 연구를 시작으로. 70년대 초기부터는 한외여과막(UF막)에 관한 연구가 수행되었다. 이후 정밀여과막(MF막), 기체분리막(GS막) 등에 관한 연구가 이루어져 수처리 분야 및 기체분리 공정 등에 실용화되고 있다. 특히 80년대 초기부터 10년간으 실험실 연구단계에서 산업화로 넘어온 시기로서 막분리 기술이 크게 발전되었다. 이때에 주요한 연구성과는 다음과 같다. 수행되었다. 1) 호주의 수처리 설비공장과 흥성의 8271공장은 매년 몇 천대의 나권형 모듈을 제조할 수 있는 RO막 생산라인을 건립하고, 국가해양국 항주 수처리기술개발센터의 중공사막 제조라인은 1,000만원/년의 생산능력을 갖고 있다. 2) 대형 중공사막, 나권형 모듈제조 기술이 확립되어, 국산 RO, UF모듈 및 장치는 초순수 제조 및 발전소 보일러 용수의 정화에 사용되어 수입 사용되는 외국장치를 대체하게 되었다. 3) 막분리 기술의 연구 및 응용공정 개발에 관한 연구 인력은 당시 초보적인 소수의 연구원이 형성된 이후, 지금은 전문연구인력이 400여명에 이르고 있다. 본고에서는 중국에서 응용되고 있는 분리막 기술중 RO막, UF막, MF막 및 NF막을 중심으로 기술개발 동향 및 현황을 소개하고자 한다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2009

EMMC(Entrapped Mixed Microbial Cell) process which is a kind of active cell immobilizing method was applied to treat fisheries processing wastewater biologically. Kinetic constants were calculated for organic and nitrogen removal and effect of effluent recycling on system performance was evaluated also. Yield coefficient, Y showed relatively low value compared with Y value obtained from conventional activated sludge process. It means that EMMC process can reduce amount of excess sludge significantly compared with conventional activated sludge process. Endogenous respiration coefficient $k_e$ of EMMC process also showed relatively low value compared with that of conventional activated sludge process. Yield coefficient Y, endogenous respiration coefficient $k_e$ and half saturation constant $k_s$ obtained from EMMC process in terms of nitrification were compared with reported value from literature based on suspended growth nitrification system. The value of Y obtained from this study has no difference compared with values obtained from literature review and $k_e$ of this study was low but $k_s$ of this study was high compared than values obtained from suspended growth nitrification system. To evaluate the effect of internal recycling on system performance, system was operated with internal recycling ratio of 1.5Q, 2.0Q, 2.5Q and 3.0Q. increase of internal recycling ratio effect more greatly on improvement of denitrification efficiency than that of nitrification efficiency. Accordingly, optimization of internal recycling ratio has to be based on improvement of anoxic reactor performance.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.265-277
• /
• 2010

In this study, an offshore process FEED(Front End Engineering Design) method is systematically established to perform integrated process engineering for topsides systems of LNG FPSO(Floating, Production, Storage, and Off-loading unit) based on the concepts and procedures for the process FEED of general offshore production plants. First, various activities of the general process FEED engineering are summarized, and then the offshore process FEED method, which is suitable for application to all types of offshore oil and gas production plants, is proposed. Second, an integrated process engineering environment is built based on the proposed FEED method. Finally, the integrated process engineering environment is applied to topsides systems of an LNG FPSO in order to verify the validity and applicability of the proposed FEED method. As a result, it is shown that the proposed FEED method can be applied to the process FEED engineering of FPSOs and moreover will be able to contribute to perform successful offshore projects in the future.