• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.1
• /
• pp.29-35
• /
• 2015

The concept design of a riser for Ocean Thermal Energy Conversion in 10 MW is proposed and its dynamic behaviour characteristics is analyzed with numerical method. A riser pipe with a hollow along its thickness in the cross-section to increase the effective modulus of its cross-section is designed considering the manufacture. The riser pipe without hollows along its thickness needs a lumped weight at the bottom end of a riser in order to keep its vertical hanging configuration from large buoyancy and the strong current. The riser is designed to control its density by inserting materials in high or low density into a hollow. The dynamic behaviour characteristics of the two designed risers is evaluated with the developed numerical analysis tool. The combined stress of the riser with a lumped weight is showed to be dominated by weight of a lumped mass. The riser with no hollow shows large combined stress near sea surface by strong current. Local structural analysis for the cross-section of a hollow riser is needed in detail.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2015

The design on a riser in 1MW OTEC system is performed. The minimum diameter of the riser is decided depending on intake quantity of deep-sea water to supply an OTEC cycle. An applicable pipe material is selected from analyzing the properties of commercial pipes. The selected HDPE pipe with the low density and strength is reinforced with a lumped block attached at the end of and wire ropes along the riser. A lumped block, connected to a floating structure by wire ropes, with 25% and 50% weight of a GFRP riser is designed to be attached the end of a riser. The structural safety of the HDPE riser with wire rope supporting axial loads induced by a lumped block is analyzed under the harsh ocean environmental condition near Hawaii ocean with the numerical method. The final dimension of the riser and accessories is determined considering the economic point of view. The designed riser will be applicable to the construction of the 1 MW OTEC pilot plant.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.99-110
• /
• 2016

When a riser is damaged, the oil spills to sea. Oil spills cause huge economic losses as well as a destruction of the marine environment. To reduce losses, it is needed to predict spilled oil volume from risers and the excursion of the oil. The present paper simulated the oil spill for a damaged riser using open source libraries, called Open-FOAM. To verify numerical methods, jet flow and Rayleigh-Taylor instability were simulated. The oil spill was simulated for various damaged leak size, spilled oil volume rates, damaged vertical locations of a riser, and current speeds. From results, the maximum excursion of the spilled oil at the certain time was predicted, and a forecasting model for various parameters was suggested.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.387-393
• /
• 2019

In this study, the free motion of a riser due to vortex shedding was numerically simulated with Large Eddy Simulation (LES) and Detached Eddy Simulation (DES) turbulence models. A numerical simulation program was developed by applying the Rhie-Chow interpolation method to the pressure correction of the OpenFOAM standard solver pimpleDyMFoam. To verify the developed program, the vortex shedding around the fixed riser at Re = 3900 was calculated, and the results were compared with the existing experimental and numerical data. Moreover, the vortex-induced vibration of a riser supported by a linear spring was numerically simulated while varying the spring constant. The results are compared with published direct numerical simulation (DNS) results. The present calculation results show that the numerical method is appropriate for simulating the vortex-induced motion of a riser, including lock-in phenomena.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.5
• /
• pp.364-370
• /
• 2017

A numerical model based on the mode superposition method is used to study the vortex-induced vibration response characteristics of a deep-sea riser such as steel catenary riser (SCR). A steel catenary riser can be modeled using a flexible cable with simple supports at both ends. The natural frequency, mode shape and mode curvature of the riser are calculated and the vortex-induced vibration response of the riser is obtained using the equilibrium of the input and output power. The mode superposition method is applied to the vibrational stresses for each mode to calculate the overall riser fatigue life.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.123-130
• /
• 2019

The flow around a curved riser exposed to the current in various directions was investigated at a Reynolds number of 100 using a numerical simulation. The present study found that the flow features of the curved riser were distinct from those of a straight riser as a result of its large radius of curvature. Namely, there were various wake patterns according to the flow's incident angle. As the incident angle increased from $0^{\circ}$ to $90^{\circ}$, a two-row street of vortices that developed along the centerline of the curved riser became more apparent. However, when the incident angle approached $180^{\circ}$ from $90^{\circ}$, these vortices were completely suppressed by the interaction between the wake and an axial flow induced by the curvature of the riser. To identify this feature, the sectional force coefficients were also considered, and it was found that the force coefficients could be different from those found in a sectional analysis based on the strip theory when investigating vortex-induced vibration. As a result, this kind of study would be important to realistically estimate the riser VIV (vortex-induced vibration) and fatigue life, and a new force coefficient database that includes the three-dimensional effect should be established.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.239-244
• /
• 2006

As an effective means to convey crushed materials from seabed to onboard ship, air-lift pump provides a reliable mechanism due to its simple configuration and easy-to-operate principle. The present study is focused on fundamental investigation of related performance through analysis program based on the gas-liquid two-phase flow in circular pipes. It is summarized as important result that an optimum air mass flow rate exists for the maximum lifted liquid mass flow rate in terms of a given submergence rates.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.3
• /
• pp.109-115
• /
• 2000

Numerical model is proposed to estimate dynamic responses of riser with vortex excitation by inline current. Galerkin's finite decomposition method is implemented for the development of a numerical model and vortex excitation is modeled by coupled wake oscillator proposed by Blevins. The numerical results are inspected through the physical interpretation to give the verification and usefulness of the suggested numerical model.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.83-90
• /
• 1999

본 논문에서는 금후 널리 사용되리라고 예상되는 장대 유연한 해양구조계의 동적 응답에 대한 능동제어를 다루었다. 제어기법으로는 optimal, adaptive 제어와 우주구조물의 진동제어에 사용되는 LAC/HAC 제어를 도입하여 simulation과 모형실험을 수행하였다. 기존의 발표된 최적제어 실험결과는 만족스럽지 못하여 다시 수행할 필요성이 있었다. 그 결과, 해양구조계의 위치 및 탄성변형이 타당한 제어력 범위내에서 제어가 되어 본 연구에서 제안한 제어시스템의 유효성이 입증되었다. 또한 제어기법간의 비교를 통하여 장대 유연한 해양구조계에 대한 최적의 제어기법에 대하여 조사를 하였는데, 초기 시스템 파라미터의 추정에 오차가 있는 경우 적응제어 알고리즘의 장점을 확인할 수가 있었다.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.65-72
• /
• 1999

A deep-ocean mining riser pipe is subjected to floating vessel motion as well as environmental forces arising from currents and waves. The dynamic analysis is carried out for a deep-ocean mining riser pipe by using a finite element method. The vortex shedding which excites risers in a direction perpendicular to the flow and induces transverse response is considered. It is demonstrated that transverse displacements due to vortex shedding is greatly increased in lock-in regions. The result of this study is compared with other results having good agreements.