• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.297-309
• /
• 2016

This study was carried out to investigate the differences in sedimentary environments and benthic polychaete communities between farming grounds and natural habitats (non-farming ground) in Gamak Bay. Sampling stations of natural habitats were evenly distributed in the entire bay. And mussel farm, oyster farm and ark-shell farm were selected as farming grounds. Dominant sedimentary facies was mud in most sampling stations of farming grounds and natural habitats. However organic contents were higher in the farming grounds than natural habitats of the bay. The species number and mean density of polychaetous community in the natural habitats were greater than those from the farming grounds. Lumbrineris longifolia, known as potential organic enrichment indicator species, was first dominant species both in farming grounds and natural habitats of the bay. However, the next dominant species consisted of different species between two benthic habitats. As a result of community analysis using cluster analysis and nMDS, the natural habitats were divided into several station groups, but most of stations in farming grounds were clustered into one group. Pearson' correlation analysis and PCA showed high relationships between sedimentary environmental factors and benthic polychaetous community in natural habitats, but low or no relationships in farming grounds. That means benthic polychaetous community established in farming ground was under unusual condition such as high input of organic matter. Thus it is necessary to improve the benthic environmental quality of the farming grounds as well as the north-western inner part in Gamak Bay through long-term monitoring efforts.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.3
• /
• pp.213-220
• /
• 2012

International Maritime Organization made International Convention for the Safety of Life at Sea to require all ships to carry official charts, both paper and electronic, and is especially encouraging the use of Electronic chart display and information system (ECDIS). Recently, the argument that all Electronic Charts(ENC) displayed in ECDIS should be distributed through Regional ENC Coordinating Center is being raised within the IHO. The use of ECDIS was generalized, but the existing two RENCs in Europe are thought to be not enough. Especially, East Asian region, due to its rapid growth in economy and marine traffic, RENC is found necessary. This research establishes the legitimacy and strategy of East Asian RENC by defining the roles of RENC based on the IMO ECDIS Mandatory Carriage Requirement and RENC operation status through suggesting a "Phase-In" RENC model, which was built upon the strategy of East Asian Hydrographic Commission(EAHC).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.593-599
• /
• 2016

Incheon Bridge is 13.38 km long with an 800 m span, connecting Incheon International Airport and Songdo International City, Per hour 73.8 vessels navigate this space. The purpose of this study was to suggest a safe passing speed based on the displacement of a vessel based on the safety criteria of Incheon Bridge's anti-collision fence, which was designed during its initial construction. As AASHTO LRFD suggested, vessel collision energy, vessel collision velocity, and the hydrodynamic mass coefficient were considered to derive a safe vessel traffic speed. Incheon Bridge's anti-collision fence was designed so that 100,000 DWT vessels can navigate at a speed of 10 knot. This research suggests a safe speed for vessel traffic through a comparative analysis of an experimental ship's (300,000 DWT) speed and cargo conditions, regulation speed has been calculated according to the collision energy under each set of conditions. Additionally, safe traffic vessel's safe speed was analyzed with reference to tidal levels. Results from the experimental ship showed that a vessel of maximum 150,000 DWT is able to pass Incheon Bridge at a maximum of 7 knots with an above average water level, and is able to pass the bridge with a maximum of 8 knots under ballast conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.723-730
• /
• 2016

Domestic Manila clam production has been reduced due to coastline changes and environmental degradation, but aquaculture industry is facing difficulties caused by an increase in imports. It is important to recognize the integral habitat environment in order to do sustainable aquaculture. The habitat environment of Manila clams (Ruditapes philippinarum) is closely related to the productivity of aquaculture farms. This study investigated 3 indexes, survival (sediment type, hydrodynamic), growth (Chlorophyll a, DIN, DIP) and environment (water temperature, dissolved oxygen, sediment chemical oxygen demand, ignition loss) as indicators of habitat characteristics for a tidal flat farm in Geunso Bay (Pado and Beopsan) from June 2015 to May 2016. As a result, Pado (maximums.; sand 48.76 %, hydrodynamic 10.59 cm/s, Chlorophyll a 12.70 ug/L, exposure time 3 hours, DO 18.65 mg/L) had a higher sand content, faster current speed, more abundant nutrients and DO, providing more favorable conditions for Manila clams than Beopsan (maximums.; sand 37.40 %, hydrodynamic 6.02 cm/s, Chlorophyll a 6.41 ug/L, exposure time 7 hour, DO 14.81 mg/L). In fact, Pado showed a higher density than Beopsan. This study considered the habitat environments of Pado and Beopsan to provide a basis for optimal management practices and potential suitable sites in Geunso bay.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.587-593
• /
• 2020

The securing safety of ferry ships on the domestic coast is evaluated by comparing the external force applied and the securing device based on the cargo weight and hull acceleration that can exist at the loaded position. The hull acceleration based on the domestic standard, which is the basis for securing safety evaluation, is applied without reflecting the characteristics of the ship and the sailing conditions. In this study, a total of 12 acceleration measurements were performed at four points of the hull of a ship with a DWT 6,800 ton class 15.5 knots passing through Busan-Jeju to analyze the hull acceleration of the domestic coastal ferry ship. Data were collected for the buoy. For a theoretical comparative analysis of the limited measurement results, the response amplitude operator (RAO) was analyzed through frequency-response analysis by numerical simulation, and acceleration analysis for the four points was performed using the RAO results. Based on the acceleration comparison, differences in the degree of each position were observed, but in the case of the Y-axis acceleration, the analysis was 1.81 m/s², and the measurement was 1.47 m/s². The analyzed simulation result was as high as 0.34 m/s². Moreover, analysis was performed at 22 % level, and measurement at 18 % level.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.3
• /
• pp.218-226
• /
• 2016

Field observations were used to study the characteristics and influence of groundwater level fluctuations on vegetation development on the natural beach of a sandy barrier island, in the Nakdong River estuary. The spatial/temporal fluctuations of the groundwater level and the interactions with the external forces (weather, ocean wave and tide) were analyzed. The results indicated that when it rains the groundwater level rises. During summer, when precipitation intensity is greater than 20 mm/hour, it rose rapidly over 20 cm. Subsequently, it fell gradually during periods of no precipitation. Seasonal characteristics indicated that the groundwater level was high during the summer rainy season and tended to fall in the winter dry season. The time-averaged groundwater level, observed from the four observations over 3 years (2012-2014), was about 1.47 m, higher than mean sea level (M.S.L.). It was shown that the average annual groundwater level rises toward the land rather than showing intertidal patterns observation. Differences in the presence or absence of a coastal sand dunes affected the progress of vegetation. In other words, in environments of saltwater intrusion where the groundwater level varies, dependent on the distance from the shoreline and bottom slope, sand dunes can be provided to affect soil conditions and groundwater, so that vegetation can be grown reliably.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.393-399
• /
• 2017

In a reciprocating compressor, the piston and connecting rod are important parts. Excess mechanical stress on these parts may cause damage, and broken parts are expensive and difficult to replace. Therefore, it is necessary to analyze the mechanical stress affecting durability and longevity. The main purpose of this study was to identify locations of maximum stress on pistons and connecting rods. Based on dynamic calculation of the working process of a specific air compressor, an analysis of piston and connecting rod performance has been completed. A three-dimensional model for the air compressor's pistons and connecting rods was built separately, and FEM analysis of these components was carried out using a numerical method. The pistons were loaded by pressure which was changed according to crankshaft angle without thermal boundary conditions. The simulation results were used to predict and estimate stress concentration as well as the value of this stress on pistons and connecting rods. The maximum equivalent stress calculated are over 190 MPa on pistons and 123 MPa on connecting rods at crank angle $135^{\circ}$ and $225^{\circ}$ but these are under tensile yield strength. Besides, the calculated safety factors of connecting rods and pistons is higher than 1. Moreover, the results obtained can be used to provide manufacturers with references to optimize the design of pistons and connecting rods for reciprocating compressors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.400-406
• /
• 2017

The model used in this study was reversed to analyze the cause of excessive damage that occurred inside the rotating system and pipe system of a centrifugal-type seawater pump on a ship. For this purpose, internal flow analysis on a cooling seawater pump was performed using CFD. As a result, the shape and boundary conditions of the target pump were set by reverse engineering, and pump efficiency at a design operating point of $125m^3/h$ was calculated as 85.3 % with a head of 32.0 m. The maximum efficiency point of the target pump was estimated to be 86.2 % at $150m^3/h$, but this differed from the actual operating point. At $112.5m^3/h$, which was the lowest flow point, flow was unstable due to the characteristics of the low flow point and analysis convergence was not good. The purpose of this study was to clarify the cause of ongoing cavitation in seawater pumps and piping systems in operation. Future research will be needed to clarify causes for pipe systems in the future by performing calculations for the total piping system of an inlet and outlet, in addition to measuring the flow rate of each branch pipe.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.576-585
• /
• 2020

This study quantitatively investigated the increase in ballasting time through numerical calculations when an ultraviolet (UV) ballast water management system (BWMS) is installed on an existing vessel. The calculation results indicate that the ballasting time of a gas carrier having 55,000 dead weight tonnage was 2.152 hours without installation of the UV BWMS and implementation of a flow control function. Ballasting time increased by 14.2% after installing the UV BWMS, and it increased by 20.4% with both its installation and implementation of a flow control function. If actual conditions are taken into account, ballasting time after installing the UV BWMS is estimated to increase by at least 30% compared with current ballasting time. Therefore, when concerned parties select a UV type BWMS, it is advisable for them to minimize ship operation losses from an increase in ballasting time by considering the capacity of the actual ballast pumps on board and the flow energy loss of the UV BWMS. Additionally, it is recommended that a BWMS with larger capacity, larger pipes, and pipes with inside coatings be used to minimize the increase in ballasting time after installation of the BWMS.

• Microbiology and Biotechnology Letters
• /
• v.30 no.3
• /
• pp.223-229
• /
• 2002

For the research of the natural marine antioxidant, several bacteria were isolated from the coast of jin-Hae in Korea. Among the marine bacteria studied, strain HJ-14, a gram-negative, motile, strait rod, aerobic, and $Na^{+}$ required bacterium showed high activity of 1,1-diphenyl-2-picrylhydrazyl radical scav- enging. The morphological, physiological, and biochemical characteristics of the strain HJ-14 were similar to those of the Alteromonas macleodii ATCC $27126^{T}$ . Thus, it was tentatively identified as Alteromonas sp. HJ-14. The compositions of major fatty acids in cell membrane of Alteromonas sp. HJ-14 were $C_{ 14:0}$ , $ C_{15:0}$ , $C_{16:0}$ and $C_{17:1}$ $_{w8c}$ , which also suggest that it is affiliated with Alteromonas sp. The optimum culture conditions for production of antioxidant materials with Alteromonas sp. HJ-14 were at $25$~$37^{\circ}C$ and pH 6~8. The optimum conditions for the production of antioxidant for carbon, inorganic nitrogen, and sodium chloride sources were 2.5%(w/v) dextrin, 0.5%(w/v) ammonium sulfate, and 2~6%(w/v) sodium chloride, respectively. The hydroxyl radical scavenging ability of Alteromonas sp. HJ-14 broth was 90.03%, which is higher than ascor-bic acid(83.28%) and lower than butylated hydroxyanisole(95.46%) and $\alpha$-tocopherol(97.17%).