• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.775-782
• /
• 2021

The Myodo-Strait at Yeosu Port is normally used as a major vessel passage for dangerous cargo carriers that carry regular products of dangerous goods. Currently, the Myodo-Strait allows only single passage, and the speed of passage is also limited to 8 knots. As a result, demurrage at the wharf of hazardous goods are also on the rise. It is expected that the development of a number of dangerous commodity wharf in the future will increase the volume of vessel traffic and increase the number of vessels used in the project area. Therefore, it is urgent to improve the waterway in order to secure the safety of ships using the waterway and improve the demurrage. This study proposed an improvement plan for the waterway through the analysis of the marine environment of the waterway and the process of collecting opinions from users in the sea area. and it was finally proposed to expend the width of the strait to 300m and secure a depth of 9.50m through Guidelines of Port and Harbor Design review and ship handling simulation evaluation. In addition it was evaluated that the vessel traffic congestions at peak-time in the situation of solo passage was greatly improved from 71.01% to 47.3% even when it was allowed to ship's crossing passage, as a result of vessel traffic congestions evaluation. According to the proposed improvement plan, the safety of ships' passage in the project area can be secured, and the issue of demurrage was also considered to be improved.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.164-170
• /
• 2021

Research was conducted to analyze and improve the kinetic performance of offshore wind power generators. The shape used in this study was taken with reference to the previous paper, and the size of the repair area was designed at 80%, 60%, 40%, and 20%, respectively, and the exercise performance was confirmed accordingly. The sea state was calculated in Sea State 4, 5, and 6. In the calculation process, the calculation was performed using commercial computational hydrodynamics (ANSYS) and AQUA. In the case of overall exercise performance, it was confirmed that the smaller the size of the repair area, the smaller the exercise such as heave, roll, and pitch. However, it was confirmed that in the case of a shape in which the size of the repair area was rapidly reduced, there may be cases in which the restoration performance was not satisfied when the restoration calculation was performed. In addition, it was confirmed that there may be an appropriate repair surface depending on the sea condition.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.97-108
• /
• 2012

A Lagrangian particle tracking model coupled with the ECOM3D were used to study on the behavior of fresh water released from the Namgang Dam in terms of residence time in Kangjin Bay, South Sea, Korea. Model was calibrated until skill cores for elevation, velocity, temperature and salinity are satisfied over 85%. In the numerical simulation, particles were released in 1 hour time interval from the northern boundary. The different patterns of particle trajectory are identified under the varying dynamics from tidal to density-driven current. The average residence time of total particles are approximately 65.9 hours in the entire Kangjin Bay. The average residence time were increased from 55~65 to 70~80 hours during maximum discharge period. Discharge rate of fresh water and average residence time in the Kangjin Bay is high correlated with correlation coefficient over 0.81.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2007

Mooring survey for measurement of tidal current and suspended sediments was carried out at 4 inlets of Yeoja Bay in April, 2000 in order to understand the source of sediment supply. Net suspended sediment transport load during 2 tidal cycles through the M-1(West Inlet) was $133.88\;kg{\cdot}m^{-1}$ toward the Yeoja Bay, whereas the flux through the M-2(Jabal Inlet) was outward the Bay with the amount of $146.43\;kg{\cdot}m^{-1}$. The influx through the M-3 and 4(Bulgyo and Dong Isa Stream) was $23.25\;kg{\cdot}m^{-1}$ and $4,312.31\;kg{\cdot}m^{-1}$ toward the Yeoja Bay, respectively. Influx of suspended sediment on Yeoja Bay mainly occurred in the Dong Isa Stream. In the wet season the composition of surface was coarser-grained than dry season, possibly due to the influx of silty sediment from Dong Isa Stream In the wet season.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.114-114
• /
• 1997

항만개발 사업은 매립이나 준설과 같은 해안선과 해저지형을 변화시키는 공사가 이루어지며 이는 조석조류 현상의 변화를 유발하게 된다. 특히 해안지형이 복잡한 항만이나 하구에서는 변화정도가 크게 나타나며 방파제나 선박접안 시설과 같은 항내 구조물을 축조 할 경우에도 조석조류 변화가 야기된다. 조석조류 현상의 변화는 해양 수질과 생물상에 영 향을 줄뿐만 아니라 인접한 육지에 이르기까지 크다란 피해를 유발할 수가 있다. 창조시 해 수를 육지로 범람하게 하거나 퇴적이나 침식조건을 변화시킬 수도 있으며 오염물질이 외해 로 확산되는 과정을 방해하고 해양생물의 서식조건을 악화시켜 부근 해역의 어업에 피해를 유발할 수도 있다. 또한 해안 공사 과정에 해수로 유입되는 토사나 항만 이용시에 배출되는 폐수 등이 항내 수질과 생태계를 변화시킬 수 있다. 따라서 조석조류와 수질변화를 사전에 예측하고 이를 최소화하는 방안이 강구되어야 한다. 조석조류와 수질 변화를 사전에 예측하 는 방법으로 축소모형 실험과 컴퓨터 시뮬레이션이 사용된다. 축소모형 실험은 현장을 재현 하는데 많은 경비와 시간이 소모되며 예측에 한계가 있다. 반면에 컴퓨터 시뮬레이션은 대 상해역의 지형과 조류 그리고 수질특성에 적합하게 모델을 개발할 경우 예측력이 매우 높기 때문에 현재 가장 널리 이용되고 있다. 본 연구는 유한 요소법에 기초하여 미국 공병단 (United States Army Corps of Engineers)에서 개발한 TABS-2 모델을 이용하여 온산항에 서 시행되는 부두건설에 따른 조석조류 및 수질변화를 시뮬레이션하였다. 측정된 자료로 모 델 계수를 보정하고 검증하였으며 항내 매립과 준설이 이루어질 때 나타나는 조위와 조속변 화를 예측하였다. 매립과 준설공사시 유출되는 토사가 조석조류현상에 따라 이동 확산되는 범위와 농도분포를 예측하였다.ophobic components)은 75~80%, 친수성 물질(hydrophilic components)은 30~33%정도의 분포를 보였고, 전염소 및 전오존 공정을 거친 처리수에서는 각각 62.2-62.8%, 43.9~49.0% 및 50~ 55%, 40~57% 정도의 분포를 보였다. 그리고 웅집-침전을 거친 처리수에서는 그 분포가 77~82%, 24-48%였다. 전주리 공정을 통하여 소수성 물질(byoghobic components)의 분포가 감 소하는 것을 볼 때 전염소 및 전오존 처리가 용존유기물의 응집에는 오히려 역 효과를 나타내는 것으로 판단된다. 것으로 판단된다.여 황토 2g에 대하여 Hieltijes and Lijklema 방법에 의해 Adsorbed-p, Nonapatite inorganic-P(NAI-P), Apatite-p, Organic-P로 구분하여 분석하고, 총인(Total Phosphorus)을 Standard Methods에 따라 Persulfate digestion후 0.45 m membrane 여지 여과하여 여액에 대해 PO3-4-P의 농도를 Ascorbic Acid 법으로 측정한 결과, NAI-P가 가장 큰 비율을 차지하였고, 부원료로 첨가된 금속 양이온 중 Fe3-이온이 흡착에 기여하는 정도가 가장 큰 것으로 평가되었다.다당류 T-AS의 보체 활성화 기작은 classical과 alternative complement pathway의 양 경로를 통해 활성화 되었다. T-AS 분획은 mouse내의 특정 혈청단백을 증가시켰으며, 항체 생성능의 증가가 관찰되어 effect T 세포의 활성화가 나타나고 있음을 알 수 있었다. T-AS는 생체내 투여시에 대식세포의 탐식능이 증진되었으며, 대식세포 기능 저해제에 의한 대식세포의 기능 저해 현상이 회복되었다. 이와 같은 결과들로부터, T-AS의 항암 활성은 활성

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.3
• /
• pp.275-285
• /
• 2010

Present state of nationwide marine facilities reported to 12 regional maritime affairs and port offices of MLTM in Korea for two years 2008 and 2009 was analyzed based on region and type of facilities, and national management plan was proposed in this study. As of the end of 2009, 8 types of marine facilities were reported to Yeosu regional maritime affairs and port office, while only 3 types of facilities were reported to Pohang, Daesan and Jeju regional offices, respectively. Oil and noxious liquid substances storage facilities belonged in the type of facility which was reported to all of 12 regional offices, and ranged from 11 facilities reported to Pyeongtaek regional office to the respective 38 facilities to Yeosu and Masan regional offices. In pollutants storage facilities, 4 facilities were reported to Masan regional office, 2 facilities to Donghae and Mokpo regional offices, respectively, 1 facility to Yeosu, Gunsan and Pyeongtaek regional offices, respectively, and none of facilities to the other regional offices. Ship construction, repair and scrap facilities belonged in the type of facility which was reported to all of 12 regional offices, and 45% of the facilities were concentrated in Southeastern Sea of Korea centering around Busan and Masan. In cargo handling facilities, 3 facilities were reported to Busan and Masan regional offices, respectively, 1 facility to Daesan regional office, and none of facilities to the other regional offices. In wastes storage facilities, 5 facilities were reported to Ulsan regional office, 4 facilities to Gunsan regional office, 2 facilities to Incheon regional office, 1 facility to Yeosu regional office, and none of facilities to the other regional offices. 65% of nationwide water intake and drainage facilities were concentrated in the areas of Pohang and Mokpo, and 78% of nationwide fishing spots at play were concentrated in the area of Masan. In other marine facilities, 4 facilities were reported to Donghae regional office, 3 facilities to Masan regional office, 2 facilities to Yeosu and Pyeongtaek regional offices, respectively, 1 facility to Incheon and Ulsan regional offices, respectively, and none of facilities to the other regional offices. In integrated marine science base facilities, 3 facilities were reported to Jeju regional office, 1 facility to Yeosu, Ulsan and Gunsan regional offices, respectively, and none of facilities to the other regional offices. The management based on the circumstances of regional offices, the management based on the characteristics of the type of facilities, the amendment of the relevant rules and regulations, facility owner's full knowledge and observance of the relevant rules and regulations with regard to the relevant type of facilities, and positive management actions from national point of view were proposed for national management plans of marine facilities.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.106-106
• /
• 2018

해양환경용 선박재료는 전기화학적인 부식을 발생시키는 염소이온($Cl^-$)이 다량 포함된 부식 환경에 장기간 노출되어 있어 부식에 대해 취약하다. 따라서 우수한 내식성 및 내침식성을 가진 재료를 선정하는 것은 매우 중요하다. 알루미늄 합금은 충분한 강도와 부동태 피막 형성으로 인해 내식성이 우수하여 해양환경용 선박 재료로서 널리 이용되고 있으며, 이에 따른 부식 특성에 관한 연구도 활발히 이뤄지고 있다. 그러나 선박에서는 부식에 의한 손상뿐만 아니라 전식에 의한 부식 손상도 발생할 수 있다. 특히 선미 부분은 프로펠러의 동합금과 알루미늄 합금의 이종금속 간 전위차에 의한 전식이 발생하여 선체의 다른 부위에 비해 부식이 더 심하게 진행될 수도 있다. 또한 전식은 해안 부두에 접안된 선박의 용접 시미주전류(stray current)에 의한 부식손상이 발생할 수 있으나 이에 대한 연구는 미미한 실정이다. 따라서 본 연구는 해양환경에서의 전식을 인위적으로 모사할 수 있는 부식 정전류 시험법을 이용하여 다양한 크기의 전식 손상을 유발시켰으며, 해양환경 하에서 선박재료로 주로 사용되는 알루미늄 합금인 Al5083-H321, Al5052-O, Al6061-T6에 대한 전식 특성을 비교, 분석하였다. 실험 방법으로 작동전극은 각 재료의 시험편을 $2cm{\times}2cm$ 으로 절단하여 sand paper # 2000 번까지 연마 후 아세톤과 증류수로 세척하고 건조하였으며, 제작된 시험편은 자체 제작한 홀더를 이용하여 $1cm^2$만 노출시킨 후 정전류 가속 실험을 실시하였다. 기준전극은 은/염화은(Ag/AgCl) 전극을, 대응전극은 백금(Pt) 전극을 사용하였다. 정전류 가속 조건은 $0.001mA/cm^2$, $0.1mA/cm^2$, $1mA/cm^2$, $5mA/cm^2$, $10mA/cm^2$의 전류 밀도를 천연해수에서 30분간 인가하였다. 각 재료에 대한 전식 특성은 실험 전후의 무게 감소량으로 전식의 저항 특성을 확인하였다. 그리고 3D 현미경으로 표면 손상 경향과 깊이를 측정하였으며, 주사전자현미경 (SEM)을 통해 표면 형상을 미시적으로 관찰하였다. 부식 정전류 시험 결과 모든 시편에서 $0.01mA/cm^2$에서 미세한 국부적인 부식이 일어났으며, 전류밀도가 증가할수록 표면 전반에 부식이 진행되고 성장하였다. 그리고 모든 인가 전류밀도의 조건에서 Al6061-T6가 5000계열(Al5083-H321, Al5052-O)보다 더 우수한 내식성을 나타났다.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.99-107
• /
• 2014

The purpose of this study is to formulate various improved working schemes in determining the definition of non-permissible activities to strengthen the practical implementation and operation of the integrated coastal management plan for regional self-governing authorities In this study, non-permissible activities indicate any activities which should be restricted according to the coastal functions of five different sectors in the regional plan for coastal management. Coastal management plan, are classified into four areas along the coast to use direction. It prohibited and support matters of another coastal exploitation each area. If you want to set the coastal area, has already been specified in the regional and global based on that region Land use planning and urban planning. When additional area settings in some cases may lead to conflicting results. Analyzes the factors to consider about the range and use areas set of in coastal management, It is necessary to strive for deriving a scheme to solve the existing contradiction between the state of the local - area specified problem. With the help of marine spatial planning and pointed out institutional and urban planning system to be utilized in land in the ocean for a more accurate and efficient coastal management, and registered the coastal areas, there is a need to manage. Land -use planning, consideration of another consultation body organization that is able to develop a plan that was comprehensive and marine spatial planning, The contradiction consider to specify the various areas and regions where other specific identification method is determined, Setting the range of coastal waters (within 3 nautical mile), I was exploring the coast registration scheme and registration target, etc.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.497-510
• /
• 2010

In this study, comparisons of the backscattering coefficients and the coherence values which had been extracted from SAR (Synthetic Aperture Radar) images such as JERS-1, ENVISAT and ALOS satellites with surface roughness, surface geometric and soil moisture content were carried out. As the results of analysis using the backscattering coefficient and coherence values from SAR images, the coherence was shown high in the region containing more of mud fraction due to higher viscosity of fine grain-size. A lot of tidal channels were well developed in the Ganghwa tidal flat, affecting the drainage of seawater and subsequent soil moisture content by exposure time of tidal flat. The backscattering coefficient. consequently, appeared to be lower in sand flat and mix flat with decrease of soil moisture. In contrast, most mud flats were distributed at high elevation so that soil moisture was not much influenced by seawater. The backscattering coefficient in mud flat seemed to have a relationship with the density of tidal channel. In addition, lowering backscattering coefficients in the all Ganghwa tidal flat was observed when surface remnant water increased according to the amount of rainfall. The correlation between backscattering coefficient, coherence and sediment environment factors in the Ganghwa tidal flat was investigated. In the future, more quantitative spatial analysis will be helpful to well understand the sedimentary influence of various sediment environment factors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.108-117
• /
• 2024

In this study, simulations based on computational fluid dynamics were performed for self-propulsion performance prediction of a catamaran that has asymmetrical inside and outside hull form and numerous knuckle lines. In the simulations, the Moving Reference Frame (MRF) or Sliding Mesh (SDM) techniques were used, and the rotation angle of the propeller per time step was different to identify the difference using the analysis technique and condition. The propeller rotation angle used in the MRF technique was 1˚ and those used in the SDM technique were 1˚, 5˚, or 10˚. The torque of the propeller was similar in both the techniques; however, the thrust and resistance of the hull were computed lower when the SDM technique was applied than when the MRF technique was applied, and higher as the rotation angle of the propeller per time step in the SDM technique was smaller in the simulations for several revolutions of the propeller to estimate the self-propulsion condition. The revolutions, thrust, and torque of the propeller in the self-propulsion condition obtained using linear interpolation and the delivered power, wake fraction, thrust deduction factor, and revolutions of the propeller obtained using the full-scale prediction method showed the same trend for both the techniques; however, most of the self-propulsion efficiency showed the opposite trend for these techniques. The accuracy of the propeller wake was low in the simulations when the MRF technique was applied, and slight difference existed in the expression of the wake according to the rotation angle of the propeller per time step when the SDM technique was applied.