• Smart Media Journal
• /
• v.5 no.1
• /
• pp.9-14
• /
• 2016

Although the ocean observation and exploration equipment is necessary for the oceanographical observation and strengthening influence of the nation and the resource preemption, it depended on the oversees adoption rather than the domestic development. The MBESs were developed for seabed topography, sedimentary distribution information and underwater objects exploration, but there is no domestic production. So in this research we try the localization of the marine acoustic sounder. Especially about correcting the error occurred on the hardware, we confirmed it on software.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.99-102
• /
• 2012

지표면 온도는 토지피복의 상태, 식생의 분포 상태, 토양수분, 증발산 등의 영향으로 많은 차이를 가지게 되며, 지면-대기의 상호순환의 중요한 인자로써 기후모델 및 농업 등의 기본적인 데이터로 사용되고 있다. 이러한 지표면의 온도를 정확하게 파악하는 것은 수문학적 관점 및 기상적인 관점에서 매우 중요하다. 기존에 LST (Land Surface Temperature, 지표면온도), ET (EvapoTranspiration, 증발산), NDVI (Normalized Difference Vegetation Index, 정규식생지수) 등의 검증이 많이 이루어진 MODIS위성의 Terra/Aqua센서는 한반도를 스캔하고 지나갈 때의 순간적인 데이터를 산출된다. 공간적인 면에서는 많은 이점이 있으나 시간적인 면에서는 시간에 따른 인자들의 변동성을 파악 하는데는 많은 문제가 있다. 그렇기 때문에 시 공간적으로 변화양상을 측정 할 수 있는 정지궤도위성의 중요성이 대두되고 있다. 본 연구에서는 국내에서 2010년 6월 27일 발사된 정지궤도위성인 천리안의 데이터를 활용하였다. 천리안 위성은 기상 센서와 해양관측 센서 그리고 통신센서를 가진 위성이다. 천리안 위성의 기상 센서는 MTSAT-1 위성과 같은 적외선 센서를 탑재하고 있으며, 평시에는 15분 단위의 데이터를 산출하게 된다. 천리안에서 제공되는 많은 Product(강우강도, 해수면온도, 가강수량, 지구방출복사 등)는 수자원 및 기상에 관련된 데이터가 제공된다. 하지만 아직 검증이 많이 이루어지지 못하였다. 그래서 천리안 위성 데이터인 지표면 온도자료를 이용하여 천리안 위성의 효율성에 대해서 알아보고자 하며, 기존의 검증이 많이 이루어진 MODIS의 데이터와의 상관성을 분석하고 지상과의 관계를 검증 및 비교하여 천리안 위성의 활용성에 대해서 알아보려고 한다.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.198-199
• /
• 2001

식물플랑크톤의 증식에 영향을 미치는 요인 중에서 온대해역에서 가장 현저한 것은 수주의 연직혼합의 깊이이다. 식물플랑크틀이 물의 혼합에 의하여 연직적으로 아래에 이송되어, 그 깊이까지의 수주내의 전광합성량과 전호흡량(일차 생산자)이 같아질 때의 깊이를 Critical depth(CRD)라고 한다. CRD의 개념은 Gran and Braarud (1935)에 의해 제창되었고, Sverdrup(1953)에 의하여 수치모델로서 발전했다. (중략)

• Journal of Environmental Impact Assessment
• /
• v.24 no.4
• /
• pp.367-374
• /
• 2015

To examine the effect of thermal discharge from nuclear power plants, Sea Surface Temperature (SST) is one of the most important variables measured by satellite remote sensing. However, the study was not much comparison of field data and satellite SST from operational Landsat 8 Thermal Infrared Sensor(TIRS) and Landsat 7 ETM+. The Landsat 8 TIRS have 2 spilt Thermal Infrared channels but ETM+ uses one channel for extracting of SST. In spite of that this research carried out that Landsat 7 ETM+ have more profitable for correction of SST than Landsat 8 TIRS. The used 15 Landsat 7 and 8 Thermal Infrared data of path/row 114-36 were processed by SST algorithm of ENVI and IDL. The in-situ SST data from KHOA(Korea Hydrographic and Oceanographic Administration) compared with satellite SST and the accuracy of extracted SST were assessed by each field sites in-situ point data with time series satellite SST.

• Korean Journal of Remote Sensing
• /
• v.12 no.1
• /
• pp.1-16
• /
• 1996

Korea Aerospace Research Institute(KARI) is developing a Korea Multi-Purpose Satellite I(KOMPSAT-I) which accommodates Electro-Optical Camera(EOC), Ocean Color Imager(OCI), Space Physics Sensor(SPS) for cartography, ocean color monitoring, and space environment monitoring respectively. The satellite has the weight of about 500 kg and is operated on the sun synchronized orbit with the altitude of 685km, the orbit period of 98 minutes, and the orbit revisit time of 28days. The satellite will be launched in the third quarter of 1999 and its lifetime is more than 3 years. EOC has cartography mission to provide images for the production of scale maps, including digital elevation models, of Korea from a remote earth view in the KOMPSAT orbit. EOC collects panchromatic imagery with the ground sample distance(GSD) of 6.6m and the swath width of 15km at nadir through the visible spectral band of 510-730 nm. EOC scans the ground track of 800km per orbit by push-broom and body pointed method. OCI mission is worldwide ocean color monitoring for the study of biological oceanography. OCI is a multispectral imager generating 6 color ocean images with and <1km GSD by whisk-broom scanning method. OCI is designed to provide on-orbit spectral band selectability in the spectral range from 400nm to 900nm. The color images are collected through 6 primary spectral bands centered at 443, 490, 510, 555, 670, 865nm or 6 spectral bands selected in the spectral range via ground commands after launch. SPS consists of High Energy Particle Detector(HEPD) and Ionosphere Measurement Sensor(IMS). HEPD has mission to characterize the low altitude high energy particle environment and to study the effects of radiation environment on microelectronics. IMS measures densities and temperature of electrons in the ionosphere and monitors the ionospheric irregularities in KOMPSAT orbit.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.44-50
• /
• 2010

COMS accommodates multiple payloads; Meteorological Image(MI), Ocean Color Imager(GOCI) and Ka-band communication payloads. In order to improve the quality of MI visible channel, the moon image has been taken into account as backup reference in addition to Albedo monitoring. However, obtaining the moon image by adding special mission schedule is not recommended after IOT, because we may miss chances to obtain meteorological images during the time slots for special imaging. As an alternative solution, an approach extracting moon image from MI FD(Full Disk) image has been proposed when the moon is positioned near to the earth. However, prediction of acquisition time of moon image is somewhat difficult as the moon moves while the MI is scanning type sensor. And the moon can not be seen when it is behind the earth or outside of FD field of view. This paper discusses how effectively the moon can be detected by the MI FD imaging. For that purpose, this paper describes an approach taken to predict the time when the moon image is achievable and then introduces the results obtained from computer simulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.2 s.29
• /
• pp.169-172
• /
• 2007

This paper presents circuit models and control algorithms of distributed generation system(DGS) which consists of Z-type converter and PWM inverter. Z-type converter which employs both the L and C passive components and shoot-through zero vectors instead qf the conventional DC/DC converter in order to step up DC-link voltage. Discrete time sliding mode control with the asymptotic observer is used for current control. This system am be used for power conversion of DC renewable energy.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.1
• /
• pp.32-39
• /
• 2013

Although space-borne satellites are useful in obtaining information all around the world, they cannot observe at a suitable time and place. In order to overcome these limitations, an airborne remote sensing system was developed in this study. It is composed of a SAR sensor and a thermal infrared sensor. Additionally GPS, IMU, and thermometer/hygrometer were attached to the plane for radiometric and geometric calibration. The brightness of SAR image varies depending on surface roughness, and capillary waves on the sea surface, which are easily generated by sea winds, induce the surface roughness. Thus, sea surface wind can be estimated using the relationship between quantified SAR backscattering coefficient and the sea surface wind. On the other hand, thermal infrared sensor is sensitive to measure object's temperature. Sea surface temperature is obtained from the thermal infrared sensor after correcting the atmospheric effects which are located between sea surface and the sensor. Using these two remote sensing sensors mounted on airplane, four test flights were carried out along the west coast of Korea. The obtained SAR and thermal infrared images have shown that these images were useful enough to monitor coastal environment and estimate marine meteorology data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.352-361
• /
• 2021

An underwater positioning method that can be applied to structures for underwater construction is being developed at the Korea Institute of Ocean Science and Technology. The method uses an extended Kalman filter (EKF) based on an inertial navigation system for precise and continuous position estimation. The observation matrix was configured to be variable in order to apply asynchronous measured sensor data in the correction step of the EKF. A Doppler velocity logger (DVL) can acquire signals only when attached to the bottom of an underwater structure, and it is difficult to install and recover. Therefore, a complex sensor device for underwater structure attachment was developed without a DVL in consideration of an underwater construction environment, installation location, system operation convenience, etc.. Its performance was verified through a water tank test. The results are the measured underwater position using an ultra-short baseline, the estimated position using only a position vector, and the estimated position using position/velocity vectors. The results were compared and evaluated using the circular error probability (CEP). As a result, the CEP of the USBL alone was 0.02 m, the CEP of the position estimation with only the position vector corrected was 3.76 m, and the CEP of the position estimation with the position and velocity vectors corrected was 0.06 m. Through this research, it was confirmed that stable underwater positioning can be carried out using asynchronous sensors without a DVL.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.182-189
• /
• 2016

In this paper, we propose a buoy system based on multi-hop relay networks for ocean observation. The proposed system consists of various sensor modules, a gateway, wireless communication modules, and a remote monitoring site. The sensor modules are integrated with various communication interfaces and connected to the gateway of the proposed buoy system with an unified protocol based on controller area network (CAN)-bus. In order to communicate with the remote monitoring site and extend the coverage, the proposed system uses long-term evolution (LTE) router and XBee mesh network modules. The field test results show that the proposed system can extend the coverage using the proposed multi-hop relay network.