• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.103-104
• /
• 2003

어류의 양식생산 과정중에는 사육중인 어류에게 스트레스로 작용할 수 있는 여러 가지 요인들이 있다. 그 중에서도 생산된 종묘의 양식장 운송, 수확한 어류의 소비지 운반 등은 양식과정중 피할 수 없는 작업이다. 어류의 수송 후에는 혈장 corticosteroid, glucose, 전해질, 삼투질 농도, 적혈구수, hematocrit, hemoglobin 등이 변화하는 것으로 알려지고 있다(Chang et al. 2001; Hur et al., 2002, 2003). 스트레스 요인별 연구로는 염분, 수온, 밀도 및 마취제에 관한 것 등이며, 아울러 이들의 복합적인 요인에 대하여 스트레스 반응을 최소화시키려는 연구가 진행되고 있다. 어류종묘의 수송이나 수확된 어류가 대량으로 수송되고 있으므로, 넙치(Paralichthys olivaceus)와 같은 대량수송 어류의 수송에 따른 스트레스 반응에 대한 연구의 필요성이 제기된다. 그러므로 본 연구에서는 넙치를 사용하여 염분, 수온 및 마취제에 의한 수송이 스트레스 지표로 알려져 있는 혈액학적 요인, cortisol, glucose, lactic acid 및 삼투질 농도 둥에 나타나는 생리학적 반응을 조사하여, 활어수송 과정에서 나타나는 스트레스 반응에 대한 기초자료를 제공하고자 하였다. 실험어는 21.2 cm, 97.4 g인 양식 넙치를 사용하여, 수온은 20℃ (natural water temperature, NWT)와 15℃ (cooling water temperature, CWT), 염분은 해수(35‰)와 15‰해수, 마취제(anesthesia, Anes., MS-222)는 50 ppm의 조건으로 혼합한 실험구를 설정하였다. 실험구는 각각 NWT＋35‰, CWT＋35‰, NWT＋15‰, NWT＋15‰, NWT＋35‰＋Anes., CWT+35‰＋Anes., NWT＋15‰+Anes. 및 CWT+15‰＋Anes.의 8개 실험구를 2반복으로 설정하여 경북울진∼부산까지 약 400 km (6시간)를 차량수송하였다. 수송용기는 스티로폼상자(66×42×20 cnn)로서, 여기에 해수 3 L와 액화산소를 넣은 비닐봉지에 넙치 8마리씩 수용하여 수송하였다. 혈액의 성상 및 분석항목은 수송전ㆍ후에 채혈하여 비교하였다. 수송전 hematocrit는 22.2±3.8%에서 수송후 NWT＋35‰에서 15.3＋3.9%, CWT＋35‰은 16.7±3.0%, NWT+15‰구에서는 19.2±1.8%로 낮아졌으며, CWT+15‰구는 20.9±3.6%로 수송전과 차이가 없었다. 한편 NWT＋15‰＋Anes.구는 17.8±0.9%, CWT＋15‰＋Anes.구는 14.5±1.5%로 낮아졌다. Cortisol은 수송전 2.4±0.1 ng/ml로부터 CWT＋35‰구는 16.7±12.8 ng/ml, NWT＋35‰구는 47.9＋19.8 ng/ml, NWT＋15‰구는 43.5±13.9 ng/ml, CWT＋15‰구는 26.1±8.3 ng/ml, NWT＋15‰+Anes.구는 61.7±3.3 ng/ml, CWT+15‰+Anes.구는 86.1±19.0 ng/ml로 높아졌다. Glucose는 수송전 74.2±32.6 mg/dl로부터 NWT＋35‰구는 197.9±27.5 mg/dl, CWT＋35‰구도 272.1±29.9 mg/dl로 유의하게 높아졌다. Na/sup +/의 수송전 농도는 163.5±0.6 mEq/L로부터 NWT＋35‰구와 CWT＋35‰구는 각각 175.3±1.2 mEq/L, 190.0±5.0 mEq/L로 높아졌으며, 다른 실험구에서는 차이가 없었다. 본 연구 결과, cortisol과 glucose에서 수송전보다는 모든 실험구에서 높게 나타나 수온, 염분 및 마취제를 사용하여도 스트레스를 받고 있는 것으로 나타났다. 특히, cortisol의 경우, 수온과 염분만을 혼합한 실험구보다 마취제를 혼합한 실험구에서 높게 나타났다. 다른 혈액학적 항목에서는 염분과 마취제를 사용하지 않았던 실험구인 NWT＋35‰구와 CWT＋35‰구에서 다른 실험구에 비하여 glucose, Na/sup +/ 및 Cl/sup -/ 등에서는 높게 나타나는 경향을 보였다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.28 no.1
• /
• pp.1-18
• /
• 2023

The East Sea, one of the regions where the most rapid warming is occurring, is known to have important implications for the response of the ocean to future climate changes because it not only reacts sensitively to climate change but also has a much shorter turnover time (hundreds of years) than the ocean (thousands of years). However, the processes underlying changes in seawater characteristics at the sea's deep and abyssal layers, and meridional overturning circulation have recently been examined only after international cooperative observation programs for the entire sea allowed in-situ data in a necessary resolution and accuracy along with recent improvement in numerical modeling. In this review, previous studies on the physical characteristics of seawater at deeper parts of the East Sea, and meridional overturning circulation are summarized to identify any remaining issues. The seawater below a depth of several hundreds of meters in the East Sea has been identified as the Japan Sea Proper Water (East Sea Proper Water) due to its homogeneous physical properties of a water temperature below 1℃ and practical salinity values ranging from 34.0 to 34.1. However, vertically high-resolution salinity and dissolved oxygen observations since the 1990s enabled us to separate the water into at least three different water masses (central water, CW; deep water, DW; bottom water, BW). Recent studies have shown that the physical characteristics and boundaries between the three water masses are not constant over time, but have significantly varied over the last few decades in association with time-varying water formation processes, such as convection processes (deep slope convection and open-ocean deep convection) that are linked to the re-circulation of the Tsushima Warm Current, ocean-atmosphere heat and freshwater exchanges, and sea-ice formation in the northern part of the East Sea. The CW, DW, and BW were found to be transported horizontally from the Japan Basin to the Ulleung Basin, from the Ulleung Basin to the Yamato Basin, and from the Yamato Basin to the Japan Basin, respectively, rotating counterclockwise with a shallow depth on the right of its path (consistent with the bottom topographic control of fluid in a rotating Earth). This horizontal deep circulation is a part of the sea's meridional overturning circulation that has undergone changes in the path and intensity. Yet, the linkages between upper and deeper circulation and between the horizontal and meridional overturning circulation are not well understood. Through this review, the remaining issues to be addressed in the future were identified. These issues included a connection between the changing properties of CW, DW, and BW, and their horizontal and overturning circulations; the linkage of deep and abyssal circulations to the upper circulation, including upper water transport from and into the Western Pacific Ocean; and processes underlying the temporal variability in the path and intensity of CW, DW, and BW.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.164-164
• /
• 2017

해양환경 중 많이 사용되는 철강재료들은 그 가혹한 부식환경에 대응하기 위하여 일반적으로 피복 도장방식법이나 음극방식법이 적용되고 있다. 여기서 음극방식법은 선박 및 해양구조물의 해중부 부식에 대해 가장 효과적인 방식법으로 알려져 있다. 한편, 이와 같이 해수 중 철강재에 음극방식을 적용할 경우, 피방식체인 그 강재 표면에 해수 중 용존된 산소의 음극환원 반응이 일어나며 국부적인 알카리 표면 조건을 형성시켜 $Mg(OH)_2$와 $CaCO_3$의 막을 석출시킨다. 이와같이 음극방식 중 형성된 전착물은 방식해야 될 표면적을 감소시켜 방식전류밀도를 감소시키는 효과가 있는 것으로 보고되고 있다. 이렇게 석출된 전착물은 음극표면에 부분적으로 형성되고, 여러 가지 환경 조건 등의 영향을 받아 그 피막의 형성 정도도 가늠하기 어렵기 때문에 음극방식 설계 시 그 정도에 따른 영향을 고려-반영하기가 곤란하다. 또한 이 전착물은 그 형성 메커니즘에 관한 해석이나 강도, 균일한 밀착성, 장기적인 방식효과 및 효율성 등이 아직 충분히 입증되어 있지 않은 실정에 있다. 따라서 본 연구에서는 해수 중 다양한 전착 프로세스에 의해 제작된 전착물의 기간별, 도장코팅 종류별 특성변화를 분석 및 평가하고, 전착물에 의한 희생양극 소모전류 변화 측정 분석을 통해 전착막을 균일하고 치밀하게 형성시키기 위한 최적의 조건을 찾고자 하였다. 또한 석출속도, 밀착성 및 내식특성을 향상시키기 위해 해수 중 기체를 용해시켜 제작한 막의 특성을 분석-평가하였다. 본 연구에 사용된 강 기판은 일반구조용강(KS D 3503, SS400)으로 ${\varnothing}42.7{\times}1,000mm{\times}4.0t$의 형상으로 제작하였다. 인가된 전류밀도는 1, 3 및 $5A/m^2$이고 도장 코팅 종류별 전착 석출물의 형성차이 비교 분석을 위한 실험은 선박 및 해양구조물에 많이 사용되는 Universal Epoxy 도료 2종을 선정하여 진행하였다. 또한 Steel Wire Mesh의 영향을 알아보기 위해 Mesh를 설치하여 실험을 진행하였다. 기간별-도장 종류별 외관관찰, 전착물의 두께 측정, SEM, EDS 및 XRD를 통해 막의 모폴로지, 조성원소 및 결정구조를 분석하였으며, 전착물의 내식성과 내구성을 평가하기 위해 테이핑 테스트(Taping Test) 및 전기화학적 양극분극 시험을 실시하였다. 희생양극 소모율에 대한 전착물의 영향을 확인하기 위해 외부전원을 인가하여 전착 피막을 형성시킨 강 기판에 희생양극을 연결하여 희생양극 소모효율 측정 시험을 진행하였다. 전착물의 석출량은 시간 및 전류밀도의 증가에 따라 비례하여 증가하였으며, 음극전류 인가 시 금속과 용액 계면 사이의 확산층에서 발생한 $OH^-$ 이온으로 인해 금속과 용액 계면 사이 pH가 부분적으로 증가하여 $Mg(OH)_2$ 화합물이 많이 생성되는 것으로 확인되었다. 또한 Mesh의 부착으로 평활하지 않게 형성된 미세한 굴곡구조 및 표면적 증가로 인하여 단계적으로 피복되는데 필요한 시간이 지연되면서 $CaCO_3$에 비해 $Mg(OH)_2$ 화합물이 상대적으로 증가한 것으로 사료된다. $CaCO_3$(Aragonite) 구조는 견고한 피막으로 치밀하고 화학적 친화력이 높아 우수한 밀착성을 보였으며 전착물의 영향으로 양극 전류가 감소하였고, 이로인해 방식전류 절감효과를 얻을 수 있을 것으로 기대된다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.223-234
• /
• 2016

This study aimed to the adsorption-removal of high- radioactive iodide (I) contained in the initially generated high-radioactive seawater waste (HSW), with the use of AgX (Ag-impregnated X zeolite). Adsorption of I by AgX (hereafter denoted as AgX-I adsorption) was increased by increasing the Ag-impregnated concentration in AgX, and its concentration was suitable at about 30 wt%. Because of AgCl precipitation by chloride ions contained in seawater waste, the leaching yields of Ag from AgX (Ag-impregnated concentration : about 30~35 wt%) was less than those in distilled water (< 1 mg/L). AgX-I adsorption was above 99% in the initial iodide concentration ($C_i$) of 0.01~10 mg/L at m/V (ratio of weight of adsorbent to solution volume)=2.5 g/L. This shows that efficient removal of I is possible. AgX-I adsorption was found to be more effective in distilled water than in seawater waste, and the influence of solution temperature was insignificant. Ag-I adsorption was better described by a Freundlich isotherm rather than a Langmuir isotherm. AgX-I adsorption kinetics can be expressed by a pseudo-second order rate equation. The adsorption rate constants ($k_2$) decreased by increasing $C_i$, and conversely increased by increasing the ratio of m/V and the solution temperature. This time, the activation energy of AgX-I adsorption was about 6.3 kJ/mol. This suggests that AgX-I adsorption is dominated by physical adsorption with weaker bonds. The evaluation of thermodynamic parameters (a negative Gibbs free energy and a positive Enthalpy) indicates that AgX-I adsorption is a spontaneous reaction (forward reaction), and an endothermic reaction indicating that higher temperatures are favored.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.2
• /
• pp.101-110
• /
• 2012

In order to understand temperature and salinity variations, and the characteristics of the seawater exchange through two channels of Gamak Bay, we conducted measurements of water temperature, salinity and current for fifteen days in the summer and winter. Based on the observational data, the current seemed to have a close relation with wind. In addition, a correlation analysis result proved that water temperature is likely to be more influenced by air temperature rather than tide. Moreover, water temperatures at the south channel varied more sensitively with the season rather than at the east channel because of its shallow depth. Seawater exchange rates were estimated to be 0.5~29.9% (mean: 11.6%) at the east channel but 1.3~62.6% (mean: 18.6%) at the south channel in summer. On the contrary, they were estimated to be 0.3~28.5% (mean: 8.9%) at the east channel but 0.1~97.9% (mean: 31.2%) at the south channel in winter. Thus, the rates of seawater exchange in Gamak Bay turned out that the south mouth is approximately three times higher than the east mouth, and it also suggested that seasonal winds affect the rates of seawater exchange in Gamak Bay.

• Journal of Aquaculture
• /
• v.15 no.1
• /
• pp.23-29
• /
• 2002

To develop techniques for the production of artificial seedling of Corbicula japonica, protocols for induction of spawning and larval development were developed. During the assumed spawning period of August to mid-September, attempts were first made to induce spawning by gonadal incision and UV-irradiation but all in vain. At the end of August, elevated thermal induction evoked 90 % positive response in animals maintained at $3\textperthousand$ salinity. Immersion in (1/1000~3/1000 N) ammonium hydroxide ($NH_4$OH) also induced spawning in 15~45%) of the treated animals at $3\textperthousand$ salinity. Fertilized eggs measured 86$\mum. At 23.0~24.5$^{\circ}C$, the fertilized egos developed into 4-cell stage embryos within 2 hours, trochophores 15 hours, D-shaped larvae 2 days, umbo 9 days and fully grown veligers, ready to infiltrate into the sediment, within 16 days.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.53-54
• /
• 2010

국내에서 소규모 어항의 재개발에 관광객 유치를 위한 친환경적인 기술의 적용이 본격화되고 있다. 항내수질 개선이라는 목적 하에서 외곽시설인 방파제의 선택은 항내 정온과 제체 안정성의 확보가 전제되어야 한다. 따라서 본 연구에서는 친환경방파제인 슬릿방파제의 수리특성을 파악하기 위한 수리모형실험을 수행하고 그 결과를 이용하여 파랑변형 및 유동 실험을 수행하였다. 현장 적용성 확인을 위하여 선정된 구조라항은 우리나라 남해의 소규모 어항으로, SSE, S, SSW파향에 영향을 받는 지역으로, 슬릿방파제를 적용한 결과 제체안정성과 항내 정온도가 확보되는 것으로 나타났다. 이는 슬릿방파제의 특징으로 장주기파의 통과율이 뛰어나다는 점과 소파효과라는 1차적인 목적과 항만 및 연안수역에서 해수교환의 향상이라는 2차적인 목적을 동시에 만족하는 것으로 나타났다.

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.383-392
• /
• 2008

This study aims to evaluate the mechanical-chemical stability of used coal ash blocks, for improving fishing grounds. The surface of weathered ash blocks in seawater showed a decrease in the Ca and an increase in the Mg contents, compared to that of fresh blocks. This result reflects the substitution of Ca by Mg in seawater. The compressive strengths of ash blocks submerged into seawater during 12 months ranged from 235.23 to $447.43\;kgf/cm^2$; this is higher than the standard strength of wave-absorbing blocks($180\;kgf/cm^2)$ that are used for harbor construction. In addition, the compressive strength of ash blocks tends to increase with increasing installation time in seawater. The result of leaching experiments on coal ash blocks by Korean Standard Leaching Test(KSLT) method showed that leached concentrations of most metals except Cr(that leached up to 50 ppb, approaching standard concentration) do not exceed the seawater quality standards. A long-term(112 days) heavy metal leaching test to analyze seawater without mixing-dilution also showed that the concentrations of leached heavy metals, except for Cu, under anaerobic conditions do not exceed the seawater quality standards. Accordingly, the use of coal ash blocks in marine environments appears to be safe from chemical and mechanical factors that decrease the efficiency of concrete. Also, leaching concentration of Cu seems to be stable by decrease of leaching concentration due to dilution of seawater.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.75-84
• /
• 2005

The aim of this study is to evaluate the leaching characteristics of lead, copper, cadmium, and mercury from steel making slag by seawater. To demonstrate the leaching characteristics of heavy metals from steel making slag by seawater, it was carried to various leaching tests such as regular leaching tests, liquid/sold(LS) leaching test and pH static test. From the leachability of $Pb^{+2},\;Cu^{+2},\;and\;Cd^{+2}$ from steel making slag in pH static test, it is distinguished between distilled water and seawater. With distilled water, it is very low between pH 7-8 and pH 11-12. On the other hands, with the seawater, its leaching is higher than that of distilled water. In particular, concentration of $Hg^{+2}$ leached from slag by seawater is lower than that of distilled water. Meanwhile, we found that the heavy metals from steel making slag would be dissolved and precipitated using geochemcial equilibrium program such as visual minteq. Lead and copper leached from steel making slag with seawater were dissolved nearly in the range of pH 11-12, but in the range of pH 7-10 those were precipitated about 90%. And cadmium leached from steel making slag with seawater were dissolved completely. On pH static test with distilled water, lead leached from steel making slag seemed to be similar to pH static test with seawater. However, copper and cadmium leached from steel making slag were dissolved. In general, the species of lead leached from steel making slag were formed mainly of $PbCl^+,\;PbSO_4$, the species of copper were formed mainly of $CuSO_4,\;CuCO_3$, the species of cadmium were formed mainly of $CdCl^+,\;CdSO_4$ due to being sorbed with the anions($Cl^-,\;CO_3^{-2},\;SO_4^{-2}$) of the seawater. Both pH static test with seawater and distilled water, it is not in the case of the mercury. Most of mercury leached from steel making slag was precipitated(SI=0). Because the decreasing of $Hg^{+2}$ concentrations depends ferociously on the variation of chloride($Cl^-$) existed in the seawater. $Hg^{+2}$ leached from steel making slag could be sorbed strongly with chloride($Cl^-$) compared of carbonate($CO_3^{-2}$) and sulfate($SO_4^{-2}$) in the seawater. On the basis of that result, we found that the species of mercury was formed of calomel($Hg_2Cl_2$) as one of finite solid. Due to forming a calomel($Hg_2Cl_2$) in the seawater, the stability of mercury species by steel making slag should be higher than those of lead, copper, and cadmium species. Regarding the results stated above, we postulated that the steel making slag could be recycled to sea aggregates due to being distinguishing leachability of heavy metals($Pb^{+2},\;Cu^{+2},\;Cd^{+2},\;and\;Hg^{+2}$) between leaching tests by distilled water and seawater.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.2 s.21
• /
• pp.81-88
• /
• 2004

We review the adaptation strategies of the 21st climate change in an application to sea level rise. For the development of appropriate adaptation strategies on the coast vulnerable to the sea level rise, we have to consider the issues such as where to adapt, how to adapt, and when to adapt. The coastal target needed adaptation can be found by the evaluation of adaptive capacity of the coastal zone which requires the understanding of impacts and adaptive potential of the natural and socioeconomic systems in the coastal zone. Planned adaptation options to sea level rise can be classified into three generic approaches as managed retreat, accommodation, and protection In practice, the implementation of the options requires the analysis of land use, degree of vulnerability, cost and benefit, etc, and may be combination of the options rather than one approach. In terms of the response timing, the adaptation can be grouped as anticipatory and reactive ones. Generally it is more effective to consider both anticipatory and reactive adaptations at the same time for the impacts of future sea level rise. Due to the scientific uncertainty of climate change issues including sea level rise, the adaptation processes have to be designed to deal with a series of processes such as information md awareness establishment, planning and design implementation, and monitoring and evaluation in continuity and long-term period.