• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.381-390
• /
• 2001

In this paper, a new improved crack analysis technique by Element-Free Galerkin(EFG) method is proposed, in which the singularity and the discontinuity of the crack successfully described by adding enrichment terms containing a singular basis function to the standard EFG approximation and a discontinuity function implemented in constructing the shape function across the crack surface. The standard EFG method requires considerable addition of nodes or modification of the model. In addition, the proposed method significantly decreases the size of system of equation compared to the previous enriched EFG method by using localized enrichment region near the crack tip. Numerical example show the improvement and th effectiveness of the previous method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.1
• /
• pp.110-116
• /
• 1999

In this paper, signal processing is utilized to reduce the computational time which is one of weak point of FDTD(finite difference time domain) method. Compared with the direct FDTD. combination of FDTD and signal processing achieves the same type of accuracy in much shorter time The combination method spends 140 minutes to analyze the frequence characteristics of the microstrip lowpass filter while the direct FDTD consumes about 900 minutes. To verify the obtained results, microstrip lowpass filter is fabricated on dielectric substrate and the measured results are compared with the analyzed results. It is shown that measured results are in good agreement with the theoretical results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.229-232
• /
• 2007

A numerical method for the moving boundary required in analysis of the combustion phenomenon of the solid propellant has been studied. The ghost cell extrapolation has been used in the Eulerian coordinate system. The Lagrangian method has been used in Non-Eulerian coordinate system. Results of the numerical analysis were verified by comparing to theoretical results of 1-D free-moving piston in the pipe.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.34-39
• /
• 1996

Target state estimation is a fundamental problem of the sonar signal processing. In this paper, the covariance analysis techniques are applied to enhance the performance of the target state estimation of a monopulse sonar system. MOST, the artificial target signal generator based on the highlight model is used to generate signals in various target states. The performance of the developed method has been evaluated by applying it to the various S/N. The enhanced performance of the covariance analysis method presented in this paper is discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1610-1614
• /
• 2010

최근 기후변화로 인한 우리나라 호우일수(80mm이상/일)의 증가, 강우강도의 증가에 따른 개별 홍수에 의한 재해규모가 증가하고 있는 현실에서 전통적인 빈도해석기법을 이용한 설계 강우량 산정과 적용에는 한계가 있다. 그러나 우리나라에서는 아직도 비정상성을 고려한 빈도해석기법이 표준화되어 있지 않고 있으며, 전통적인 빈도해석기법에 의존하여 실무에 활용되고 있는 실정이다. 따라서 본 연구에서는 기후변화에 따른 우리나라 강수 극치사상의 변동특성을 분석하고자 하였다. 연구 대상지역으로 기상청에서 운영하는 기상관측소 중에서 90년 이상의 장기 강수자료가 구축되어 있는 서울, 부산, 인천, 대구, 강릉, 목포 등 여섯 곳을 선정하였다. 선정된 6개 기상관측소의 강수자료를 이용하여, 비모수적 선형추세분석기법인 Mann-Kendall 검정을 수행하였다. 본 연구를 통하여 얻어진 결과는 우리나라의 전통적인 설계 강우량 산정기법 개선에 대한 필요성 인식과 설계 강우량 산정에 대한 새로운 접근방향 제시와 이에 따른 제도적 개선 요구에 대한 기초자료로 활용될 수 있을 것으로 판단된다.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.697-707
• /
• 2012

The quantitative landslide susceptibility assessment methods can be divided into statistical approaches and geomechanical approaches based on the consideration of the triggering factors and landslide models. The geomechanical approach is considered as one of the most effective approaches since this approach proposes physical slope model and considers geomorphological and geomechanical properties of slope materials. Therefore, the geomechanical approaches has been used widely in landslide susceptibility analysis using the infinite slope model as physical slope model. However, the previous studies assumed constant groundwater level for broad study area without the consideration of rainfall intensity and hydraulic properties of soil materials. Therefore, in this study, landslide susceptibility assessment was implemented using the coupled infinite slope model with hydrologic model. For the analysis, geomechanical and hydrualic properties of slope materials and rainfall intensity were measured from the soil samples which were obtained from field investigation. For the practical application, the proposed approach was applied to Jinbu area, Gangwon-Do which was experienced large amount of landslides in July 2006. In order to compare to the proposed approach, the previous approach was used to analyze the landslide susceptibility using randomly selected groundwater level. Comparison of the results shows that the accuracy of the proposed method was improved with the consideration of the hydrologic model.

• Tunnel and Underground Space
• /
• v.34 no.2
• /
• pp.127-142
• /
• 2024

The robustness of a numerical method means that its computational performance is maintained under various modeling conditions. New numerical methods or codes need to be assessed for robustness through benchmark testing. The TOUGH-FLAC modeling approach has been applied to various fields such as subsurface carbon dioxide storage, geological disposal of spent nuclear fuel, and geothermal development both domestically and internationally, and the modeling validity has been examined by comparing the results with experimental measurements and other numerical codes. In the present study, a benchmark test of the TOUGH-FLAC approach was performed based on a coupled thermal-hydro-mechanical behavior problem with an analytical solution. The analytical solution is related to the temperature, pore water pressure, and mechanical behavior of a fully saturated porous medium that is subjected to a point heat source. The robustness of the TOUGH-FLAC approach was evaluated by comparing the analytical solution with the results of numerical simulation. Additionally, the effects of thermal-hydro-mechanical coupling terms, fluid phase change, and timestep on the computation of coupled behavior were investigated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1073-1080
• /
• 2012

Incremental forming is a cold working process in which a small part of the material is being deformed and the area of local deformation is moving over the entire material. In this paper, we study description schemes to perform finite element analysis for the incremental forming. The selected description schemes to examine are the Lagrangian description and the arbitrary Lagrangian-Eulerian (ALE) description. The sliding boundary scheme coupled with ALE is also examined to overcome the distortion problems of elements on the contact surface. Results show that the ALE description with the sliding boundary scheme is most favorable in overcoming the distortion of elements. This description leads to make the simulation continued to the final stage of the incremental forming. On the other hand, the Lagrangian description as well as the original ALE description makes the elements much distorted and the analysis is stopped long before arriving at the final shape of deformation.

• Journal of KSNVE
• /
• v.6 no.3
• /
• pp.341-347
• /
• 1996

Vibration analysis is one of the most powerful tools available for the detection and isolation of incipient faults in mechanical systems. The methods of vibration analysis in use today and under continuous study are broad band vibration monitoring, time domain analysis, and frequency domain analysis. In recent years, great interest has been generated concerning the use of time- frequency repesentation and its application for a machinery diagnostics and condition monitoring system. The objective of the study described in this paper was to develop a new diagnostic tool for the rotating machinery. This paper introduces a new time frequency representation. Directional Winger-Ville Distribution, which analyese the time-frequency structure of the rotating machinery vibration.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1069-1075
• /
• 2013

An effective method is necessary for the real-time analysis of an unmanned military robot. To achieve highly efficient simulations, a subsystem synthesis method has been developed. The subsystem synthesis method separately generates equations of motion for the base body and for the subsystem. The equations of motion are expressed by DAE, which consist of differential equations and algebraic equations. To increase the accuracy and efficiency of solutions, DAE solvers such as the Direct, CS (Constraint Stabilization), and GCP (Generalized Coordinate Partitioning) method are employed. In this study, the subsystem synthesis method is applied for effective multi-body dynamics analysis of an unmanned military robot, and a comparative study of three different DAE solvers is carried out.