• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.374-381
• /
• 2000

본 논문에서는 지진 발생시, LRB가 설치된 교량의 시간이력 해석을 수행하였다 이를 위해 LRB의 비선형 거동특성을 Bi-linear로 모형화 하였으며, 기존의 방법인 등가선형으로 모형화된 해석결과와 비교하였다. 또한 LRB받침만 설치된 경우와, LRB받침과 일반탄성받침이 함께 사용된 경우를 해석하여, 받침이 혼합된 경우, 상시하중과 지진하중시 발생할 수 있는 문제점을 검토하였다. 4경간 연속교량에 적용된 해석결과를 보면, LRB만을 설치한 경우, Pot-Bearing만 설치된 경우에 .비해, 고유주기 상승과 이력감쇠에 의한 지진력의 감소와 함께, 지진력의 효과적인 분배를 볼 수 있었으며, 일반탄성받침과의 적절한 조합에 의해서도, 충분한 면진성능을 얻을 수 있었다. 또한 LRB의 등가선형 모델이 Bi-linear 모델에 비해 보수적인 해석결과를 나타내었다.

• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.57-64
• /
• 2011

Three-dimensional slope stability analysis was applied to a failed dual-lithology slope containing both granite and an andesitic dyke, taking account of the differences in shear strength of the different lithologies. A direct shear test of the soil-rock boundary was performed to examine the shear strength of two different types of failure surfaces within different lithologies, and a laboratory test was performed on an upper, weathered soil layer. The test results indicate that shear strength was lower at the soil-rock boundary than within the weathered soil layer. A representative geological section was subjected to two-dimensional slope stability analysis using a limit equilibrium method to assess whether the distribution of lithologies upon the slope influences the results of stability analysis. The results were then compared with those of three-dimensional slope stability analysis, for which input parameters can be varied according to the distribution of lithologies upon the slope. The three-dimensional analysis yielded safety factors of 1.26 under dry conditions and 0.55 under wet conditions, whereas the two-dimensional analysis yielded unstable safety factors of 0.92 and 0.32, respectively. These findings show that the results of stability analysis are affected by the distribution of different lithologies upon the slope. Given that the studied slope collapsed immediately after rainfall, it is likely that the results of the three-dimensional analysis are more reliable.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.59-66
• /
• 1984

The dynamic behavior of a cable-stayed bridge due to random wind forces is investigated. The effects of the steady wind, the self-excited and the buffeting forces are studied. The dynamic analysis of the structure is carried out by the frequency domain method utilizing the mode superposition. Example analysis are performed for Dolsan Bridge, which is under construction at Yeosu, Jeonnam. Aerodynamic stability of the bridge is investigated and the vertical motion of the girder as well as the tension variations of the cables is obtained.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.6
• /
• pp.55-64
• /
• 2002

For nonlinear analysis of sloshing of fluid in rectangular tanks, a new method using the perturbation approach is presented. The results by presented method show good agreement with results in previous study. The importance of nonlinear sloshing analysis is demonstrated by comparing nonlinear behaviors of sloshing in broad and tall tanks with different site conditions. In general, the results by nonlinear analysis are greater than those by linear analysis. Specially, the nonlinear behavior is significant in softer soil site and broad tank. Therefore, nonlinear behavior analysis has to be considered in the design of large liquid storage tanks.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.739-743
• /
• 2010

본 연구에서는 확산파 기반의 2차원 침수해석 모형을 이용하여 울산광역시 태화강 유역에 대하여 침수시 건물 안으로의 흐름은 없다는 가정 하에서 건물로 인한 흐름의 양상, 침수심, 침수위등을 분석하였다. 지형자료는 최근 대도시를 중심으로 구축되고 있는 1m 간격으로 수집된 LiDAR 자료를 바탕으로 10m간격의 정형격자를 통하여 지형자료를 생성하였으며, 수치지도로부터 추출된 건물을 ArcView 등의 GIS Tool을 활용하여 LiDAR 자료와 합성하여 2차원 침수해석에 적용되는 지형자료를 구성하였다. 200년 빈도의 확률강우에 대한 유출해석 결과를 이용하여 FLDWAV 모형을 적용한 태화강에 대한 1차원 하천해석을 실시하였고, 제방파제에 대한 가상의 시나리오를 생성하여 파제에 따른 외수범람에 대한 2차원 침수해석을 실시하였으며, 침수해석 결과를 각 시간별로 가시화함으로써 효율적이며 정확한 침수해석 방법을 제안하고자 하였다. 침수해석 결과에 대한 분석을 통하여 침수면적에 따른 적합도가 건물의 영향을 고려한 경우와 그렇지 않은 경우를 비교한 결과 90%이하로 떨어지는 것을 확인하였고, 침수심과 침수위에 대한 분석을 통하여 침수심은 건물 영향 고려시 낮게 산정되나 침수위로 고려시 높은 수위 값을 나타내는 것을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.164-168
• /
• 2010

최근 기후변화로 인한 지구온난화, 엘니뇨 및 라니냐 등의 현상은 과거에 경험하지 못했던 기상재해를 유발시키고 있으며, 피해규모가 전 세계적으로 매년 증가하고 있는 추세이다. 이는 기후변화가 국지적이 아닌 전지구적인 형태로 발생하는 것으로 볼 수 있으며, 이를 고려한 수자원 영향 평가를 위해서는 인접 국가들과의 연계분석이 우선적으로 이루어져야 한다. 일찍이 국내에서는 국가규모의 수문해석에 대한 필요성이 제기되어 왔으나, 국외 지역의 지형특성 및 기상조건에 대한 자료 획득과 전구수문해석이 가능한 적정 수문모형활용의 어려움으로 그동안 등한시되어왔다. 이에 본 연구에서는 국가 규모의 유출해석에 필요한 전지구 자료를 구축하고 자료의 가용성을 판단하기위해 국내를 대상으로 유출해석을 수행하여 모의 결과의 정확도를 평가하였다. 모의를 위해 전세계적으로 국가규모의 해석에 있어 적용성이 검증된 지표수문해석모형을 활용하였으며, 관측유량 대비 모의유량의 정확도를 평가한 결과 일별 유출해석 시 정확도가 매우 저조한 것으로 나타났으나, 기간별(10일 및 월별 등) 분석 에서는 신뢰할 만한 결과를 도출할 수 있었다. 따라서 전지구 자료를 활용하여 국외 수문해석을 수행할 경우 사전에 자료 품질에 대한 충분한 검토가 있어야 할 것이며, 기간별 수문해석을 통해 모의 결과를 활용하는 것이 적절하다고 판단된다.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.129-138
• /
• 2008

The finite element method(FEM) was one of tools used to solve problem of previous Concrete Pavement and was applied to Korea Pavement Research Program Study. This study used the ABAQUS and the fortran analysis program to calculate the critical stress on jointed concrete pavement and compared and analyzed the results by using neural networks and linear regression model. In that case, which are not enough analysises by using FEM programs though many input variables, when the results of FEM with NN and linear regression models are compared, there are some differences. The other cases, which are reduced input variables and a lot of analysises each of them, results of Neural Networks(NN) and linear regression models are simulated to them of FEM. But, the result of NN is more exact than them of linear regression at the (0,0), (1,1). On the results of this study, it is suggested that the calculation of stress using NN is more compatible to Korea Pavement Research Program Study.

• Journal of KIISE:Software and Applications
• /
• v.34 no.10
• /
• pp.889-899
• /
• 2007

In proteomics, recent advancements In mass spectrometry technology and in protein extraction and separation technology made high-throughput analysis possible. This leads to thousands to hundreds of thousands of MS/MS spectra per single LC-MS/MS experiment. Such a large amount of data creates significant computational challenges and therefore effective data analysis methods that make efficient use of computational resources and, at the same time, provide more peptide identifications are in great need. Here, SIFTER system is designed to avoid inefficient processing of shotgun proteomic data. SIFTER provides software tools that can improve throughput of mass spectrometry-based peptide identification by filtering out poor-quality tandem mass spectra and estimating a Peptide charge state prior to applying analysis algorithms. SIFTER tools characterize and assess spectral features and thus significantly reduce the computation time and false positive rates by localizing spectra that lead to wrong identification prior to full-blown analysis. SIFTER enables fast and in-depth interpretation of tandem mass spectra.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.121-129
• /
• 2003

Numerical studies on bearing capacity problems of layered clay are performed for smooth and rough strip footings. The finite element method and finite difference method (FLAC) are used for computations of the bearing capacity, entire load-displacement curve and the failure mechanism. The presented results show that it is possible to analyze the bearing capacity of layered clay and to give a progressive failure mechanism clearly. To obtain high quality solutions, it is necessary to review the results on control parameters(e.g., yield function, number of calculation) and compare the results by two numerical methods.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.31-37
• /
• 2012

This study is intended to present a computational thermal model for a residential building. As the Performance Based Design is more popular, fire-intensity and fire-load have turned out to be very important factors for building design and can be predicted through some computational work. To predict and estimate the fire properties of a residential fire, we made some numerical models of combustibles and residential building. In a bid to validate the estimate values, computational analysis results from numerical models were compared with real fire tests. For computational analysis, the Fire Dynamics Simulator (FDS) was used with Large Eddy Simulation (LES) model for turbulence. Consequently, fire-intensity was well predicted and flash-over of rooms were successfully estimated.