• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.37-38
• /
• 2021

해상에서의 통신은 파도의 움직임에 의해 내륙에서의 통신에 비해 어려움이 있다. 본 논문에서는 Bretschneider 스펙트럼 모델을 이용하여 Open-Ocean에서의 파도의 움직임을 모델링다. 내륙에 위치한 기지국과 내륙으로부터 일정 거리 떨어진 해상에 위치한 부표와의 해상통신 환경을 고려하였으며, 모델링한 파도의 움직임을 바탕으로 부표부터 기지국까지의 거리에 대한 각도와 기지국부터 Block되어 Non-Line of Site(NLoS)된 지점까지의 거리에 대한 각도를 비교함으로써 Continuous-LoS(CLoS)구간을 확보하기 위해 파고 대비 안테나의 높이를 변경하며 비교했다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.960-966
• /
• 2018

Communication antennas used at sea have been developed remarkably. However, the speed of this development is insufficient when compared with user demands. Therefore, we developed an antenna for UWB/Bluetooth that operates on 3 [GHz] and 5.72 [GHz] bands in order to use the high-speed communication network system which improved antenna miniaturization, gain and radiation patterns. To improve bandwidth, a microstrip patch antenna was selected and CST Microwave Studio 2014 program was used. Through the program, we calculated the slot width, length, transmission line width, etc. using a theoretical formula at each step. These figures were checked through simulation to see if they meet production standards. UWB for high-speed wireless communication for short-range communication at sea, Bluetooth for exchanging information at a short distance by connecting each device, and corresponding technology can be easily utilized.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.5
• /
• pp.567-574
• /
• 2014

In this paper, a VHF antenna with monopole structure is designed and fabricated for marine wireless communication applications. The proposed antenna is based on a monopole design, and composed of circular ring and meander structure for VHF operation which cover VHF frequency bands. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while covering the VHF bands. And measured characteristics of gain and radiation patterns are obtained for operating bands.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.180.1-180.1
• /
• 2005

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.665-669
• /
• 2018

In this paper, we design an antenna for LTE / Wi-Fi communication that operates in 2.65 GHz and 5 GHz band for small-sized broadband communication antenna that can be used in the sea. Microstrip patch antennas were chosen to improve the bandwidth. The slot width, length, and transmission line width were calculated using the theoretical formula for each step. In addition, we designed a microstrip antenna using CST Microwave Studio 2014 program that can design 3D. Simulation results show that the reflection lossis -12.712 dB at 2.65 GHz and -16.583 dB at 5 GHz. The gain was 1.738 dBi at 2.65 GHz and 3.284 dBi at 5 GHz. In this paper, we propose a dual-band antenna for LTE / Wi-Fi, which can be used in maritime environments, which is worse than terrestrial communication, because of differences in communication speed and communication stability compared with those used on land.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.195-196
• /
• 2016

In the maritime mobile radiocommunication service, AIS(Automatic Identification System) devices are most widely using for the exchange of ship's navigational information. The AIS time slot usage increases due to increasing number of ships installed with AIS, and thus the reception rate of AIS data decrease. In order to mitigate this problem, international organizations recommend a sectorised receiving technique using directional antenna. This paper analyzed the sectorised receiving effectiveness of AIS data using Yaga antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.394-401
• /
• 2013

Recently there have been much interest in the performance improvement of maritime communication system. In the maritime communication system, the wireless channel is likely to be time-invariant and the retransmission scheme is not proper because it does not provide time diversity. For the improvement of reliability, we consider MIMO ARQ scheme using Alamouti-type signal which can provide space and time diversity. In this paper, we also propose the criterion of optimal retransmission order and provide its performance of error probability and packet throughput. The proposed MIMO ARQ scheme with optimal retransmission order has performance gain over random ordered MIMO ARQ and conventional Chase combining method. Therefore we expect that it can be adapted to the next generation maritime communication system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1255-1261
• /
• 2014

Based on the radio wave measurement of korean ocean-based DGPS by season, in this paper, the service coverages of ocean-based DGPS reference stations were analyzed according to the climate and season. The signal strengths and signal-to-noise ratios in the land service areas that are provided by ocean-based DGPS reference stations were measured. The ocean-based DGPS reference station except reference stations on the mountainous terrain and the low ground conductivity provide more than 68% service area in comparison with the designed land service coverage providing by the ocean-based DGPS reference stations. To provide the designed service area that is unrelated to a season, it is necessary to install and operate the DGPS reference station with good ground conductivity and high efficiency antenna. Also, the poor service regions which is generated by obstacles of electric wave on pathway can be resolved by the double service area providing by land-based DGPS reference stations.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.390-396
• /
• 2021

In this research, design and fabrication of marine repeater capable to extend communication coverage in monitoring system of fishing gear automatic identification, which is one of implementation method of the real-name electric fishing gear system declared by Ministry of Oceans and Fisheries in 2016, is reported. The proposed marine repeater is fabricated in a form of RF repeater with interference cancellation system (ICS), which can cancel the oscillation due to feedback signal between service antenna and link antenna. In design process, we secure the isolation of 30 dB between service antenna and link antenna. It is confirmed that when the level of feedback signal into repeater input be lower of 15 dB than repeater gain, error vector magnitude due to oscillation can be lower than the performance criterion of 6%, from the test verification. It is expected that the service coverage will be extended by applying the developed marine ICS RF repeater into marine IoT network including monitoring system of fishing gear automatic identification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.532-534
• /
• 2021

Design and simulation results of 920 MHz band PCB pattern antenna and reflector embedded in marine buoy were shown in this paper. It was confirmed through simulation that radiation angle was varied from bottom of buoy to top of buoy during the buoy floating in the sea.