• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.104-107
• /
• 2018

최근 촬영 기기의 기술발전으로 인해 디지털 영상의 해상도가 증가함에 따라 선명한 디지털 영상에 대한 요구가 증가하고 있다. 이러한 요구에도 불구하고 디지털 영상 내 가우시안 잡음 (gaussian noise)은 촬영기기를 통해 영상 획득 및 처리 과정에서 발생하여 화질을 열화 시킨다. 디지털 이미지에서 발생하는 가우시안 잡음을 제거하기 위해서 기존의 저대역 통과 필터 (low-pass filter: LPF)를 사용하면 잡음은 제거되지만, 블러링 현상 (blurring phenomenon)이 나타난다. 이러한 문제점을 개선하기 위해 소벨 연산자 (sobel operator)를 사용하여 영상 내 에지 맵 (edge-map)을 생성하여 에지 영역과 동질 영역을 구분한다. 에지영역에서는 약한 저역 필터 (weak low-pass filter)를 사용하고, 그 외의 이미지 영역에서는 강한 저역 필터 (strong low-pass filter)를 사용하는 알고리듬을 제안하였다. 그리고 다양한 이미지에 대하여 기존 알고리듬과 제안한 알고리듬의 적용한 결과를 통해 주관적 화질 비교하였고 객관적 지표로 최대 신호 대 잡음비 (peak signal-to noise ratio: PSNR)와 구조 유사성 (structural similarity: SSIM)을 사용하여 성능을 평가하였다. 실험결과를 통해 제안된 알고리듬이 잡음 제거 및 외곽선 보존의 우수함을 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.507-517
• /
• 2022

The PhotoAcoustic Microscopy (PAM) has been proved to be a useful tool for biological and medical applications due to its high spatial and contrast resolution. PAM is based on transmission of laser pulses and reception of PA signals. Since the strength of PA signals is generally low, not only are high-performance optical and acoustic modules required, but high-performance electronics for imaging are also particularly needed for high-quality PAM imaging. Most PAM systems are implemented with a combination of several pieces of equipment commercially available to receive, amplify, enhance, and digitize PA signals. To this end, PAM systems are inevitably bulky and not optimal because general purpose equipment is used. This paper reports a PA signal receiving system recently developed to attain the capability of improved Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR) of PAM images; the main module of this system is a low noise, wideband signal receiver that consists of two low-noise amplifiers, two variable gain amplifiers, analog filters, an Analog to Digital Converter (ADC), and control logic. From phantom imaging experiments, it was found that the developed system can improve SNR by 6.7 dB and CNR by 3 dB, compared to a combination of several pieces of commercially available equipment.

• Journal of Biomedical Engineering Research
• /
• v.21 no.2
• /
• pp.109-118
• /
• 2000

본 논문에서는 일반적인 초음파 의료 영상 시스템에서 제공되는 단면 영상의 화질을 현저히 향상시킬 수 있는 영향 개선 기법들을 제안하였다. 제안된 기법들은 현재 대부분의 초음파 영상 시스템에 적용되는 접속기법과는 달리 한 프레임에 해당하는 RF 수신 신호들을 저장하고 합성구경 기법에 기반해서 수신신호들을 처리함으로써, 초음파 영상의 화질을 결정하는 주요 성능 변수인 해상도, 신호 대 잡음비, 주사속도 등을 개선시킬 수 있다. 제안된 기법들을 검증하기 위하여 RF 수신신호들을 저장할 수 있는 실험 장치를 제작한 후 실제 실험을 통하여 성능 평가를 수행하였다. 실험 결과 기존 시스템에 비해서 매우 우수한 영상을 얻을 수 있었으며, 시편 및 인체 데이터 경우에 모두 동일한 효과가 나타남을 확인 할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.521-527
• /
• 2014

Most of Sea Surveillance Radar(SSR)s which are used in Vessel Traffic Service are Magnetron-based Non-Coherent Method and use the pulse integration technique having a signal to noise ratio enhancement function to satisfy a surveillance performance about target. Especially, Pulse Integration technique has an effect on target serveillance performance through signal to noise ratio, in addition, has an effect to improve a signal interference and noise spike. In this paper, we have a simulation experiment by using MATLAB simulation tool for appling a pulse integration technique in VTS system using a Non-Coherent radar, and verify an optimum pulse integration technique through out performance analysis between frequently use pulse integration techniques.

• Geophysics and Geophysical Exploration
• /
• v.27 no.2
• /
• pp.91-107
• /
• 2024

Single-channel seismic exploration has proven effective in delineating subsurface geological structures using small-scale survey systems. The seismic data acquired through zero- or near-offset methods directly capture subsurface features along the vertical axis, facilitating the construction of corresponding seismic sections. However, substantial noise in single-channel seismic data hampers precise interpretation because of the low signal-to-noise ratio. This study introduces a novel approach that integrate noise reduction and signal enhancement via matrix rank optimization to address this issue. Unlike conventional rank-reduction methods, which retain selected singular values to mitigate random noise, our method optimizes the entire singular value spectrum, thus effectively tackling both random and erratic noises commonly found in environments with low signal-to-noise ratio. Additionally, to enhance the horizontal continuity of seismic events and mitigate signal loss during noise reduction, we introduced an adaptive weighting factor computed from the eigenimage of the seismic section. To access the robustness of the proposed method, we conducted numerical experiments using single-channel Sparker seismic data from the Chukchi Plateau in the Arctic Ocean. The results demonstrated that the seismic sections had significantly improved signal-to-noise ratios and minimal signal loss. These advancements hold promise for enhancing single-channel and high-resolution seismic surveys and aiding in the identification of marine development and submarine geological hazards in domestic coastal areas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.189-195
• /
• 2013

In this paper, a land and maritime unified tourism information guide system is proposed which employs robust speech recognition in ship noise environments. Most of conventional front-ends for speech recognition have used a Wiener filter to compensate for stationary noise such as car or babble noises. However, such the conventional front-ends have limitation in reducing non-stationary noise that are occurred inside the ship on voyage. To overcome such a limitation, the proposed system incorporates nonlinear multi-band spectral subtraction to provide highly accurate tourism route recognition. It is shown from the experiment that compared to a conventional system the proposed system achieves relative improvement of a tourism route recognition rate by 5.54% under a noise condition of 10 dB signal-to-noise ratio (SNR).

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2015

Purpose Whole body bone scan, which makes up a largest percentage of nuclear medicine tests, has high sensitivity and resolution about bone lesion like osteomyelitis, fracture and the early detection of primary cancer. However, any standard for valuation has not yet been created except minimum factor. Therefore, in this study, we will analysis the method which show a quantitative evaluation index in whole body bone scan. Materials and Methods This study is conducted among 30 call patients, who visited the hospital from April to September 2014 with no special point of view about bone lesion, using GE INFINIA equipment. Enumerated data is measured mainly with patient's whole body count and lumbar vertabrae, and the things which include CNR (Contrast to Noise ratio), SNR (Signal to Noise ratio) are calculated according to the mean value signal and standard deviation of each lumbar vertabrae. In addition, the numerical value with the abdominal thickness is compared to each value by the change of scan speed and tissue equivalent material throughout the phantom examination, and compared with 1hours deleyed value. Completely, on the scale of ten, 2 reading doctors and 5 skilled radiologists with 5-years experience analysis the correlation between visual analysis with blind test and quantitative calculation. Results The whole body count and interest region count of patients have no significant correlation with visual analysis value throughout the blind test(P<0.05). There is definite correlation among CNR and SNR. In phantom examination, Value of the change was caused by the thickness of the abdomen and the scan speed. And The poor value of the image in the subject as a delay test patient could be confirmed that the increase tendency. Conclusion Now, a standard for valuation has not been created in whole body bone scan except minimum factor. In this study, we can verify the significant correlation with blind test using CNR and SNR and also assure that the scan speed is a important factor to influence the imagine quality from the value. It is possible to be some limit depending on the physiology function and fluid intake of patient even if we progress the evaluation in same condition include same injection amount, same scan speed and so on. However, that we prove the significant evaluation index by presenting quantitative calculation objectively could be considered academic value.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.3
• /
• pp.289-294
• /
• 2002

A valid speech-sound block can be classified to provide important information for speech recognition. The classification of the speech-sound block comes from the MRA(multi-resolution analysis) property of the DWT(discrete wavelet transform), which is used to reduce the computational time for the pre-processing of speech recognition. The merging algorithm is proposed to extract valid speech-sounds in terms of position and frequency range. It needs some numerical methods for an adaptive DWT implementation and performs unvoiced/voiced classification and denoising. Since the merging algorithm can decide the processing parameters relating to voices only and is independent of system noises, it is useful for extracting valid speech-sounds. The merging algorithm has an adaptive feature for arbitrary system noises and an excellent denoising SNR(signal-to-nolle ratio).

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.6
• /
• pp.576-584
• /
• 2002

This paper proposes a new denosing method using wavelet packet, to reject unknown external noise and white gaussian ambient noise for measuring the transient noise which is one of the important elements for ship classification. The previous denosing method applied the same wavelet threshold at each node of multi-single sensors for rejecting white noise is not adequate in the underwater environment existing lots of external noises. The proposed algorithm of this paper applies a modified soft-threshold to each node according to the discriminated threshold so as to reject unknown external noise and white gaussian ambient noise. It is verified by numerical simulation that the SNR is increased more than 25㏈. And the simulation results are confirmed through sea-trial using multi-single sensors.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.369-376
• /
• 2007

Electrical resistivity tomography was carried out at seawater intrusion monitoring wells located at watershed in coastal areas. It is difficult to identify the characteristics of resistivity near monitoring well in case of using high signalto-noise ratio array due to the high conductivity condition in coastal aquifer although electrical resistivity survey is well adopted to delineate hydrogeological characteristics with the distribution of electrical resistivity. To improve the quality of electrical resistivity survey for two sites with seawater intrusion monitoring wells, inversion with the results of holeto-surface electrical resistivity tomography using single well was executed. The results of inversion for aquifer near wells were verified with the results of drilling log with the informations of fracture, electrical conductivity logging and normal resistivity logging. The inversion for aquifer near one of two wells was also performed at low and high tide with the same electrodes, respectively. From the inversion result, it is possible to obtain the resistivity images with high resolution and to identify the characteristics of aquifer related to seawater intrusion with tidal fluctuation. From this study, it was demonstrated that the hole-to-surface electrical resistivity tomography method accompanied with drilling log, electrical conductivity logging and normal resistivity logging would be useful to delineate the hydrogeological structures near monitoring wells in coastal areas.