• Journal of Distribution Science
• /
• v.9 no.1
• /
• pp.29-38
• /
• 2011

Since a distribution market was opened in 1993 after the conclusion of the Uruguay Round (UR), various new businesses emerged in the Korean retail industry, such as convenience shops, supermarkets, specialty stores, non-store marketing methods, and cyber shopping malls, in addition to traditional markets and department stores. Competition among these retail businesses has intensified. According to the National Statistical Office (NSO), the growth rate of the total retail industry has shown a 32% increase in the past 5 years. While department stores, supermarkets, specialty stores, and other non-store retailing venues have shown signs of stagnation at a growth rate of 20-30%, which is similar to the growth rate of the entire retail industry, convenience shops and non-store marketing have shown 60-70% growth over the same period. By comparison, the growth rate of cyber shopping malls has nearly tripled. When applying development aspects of retail businesses through the competition to the retail life cycle, mom-and-pop stores and traditional markets have already entered the decline phase as specialty stores reach their maturity phase and demonstrate their limit of growth. Department stores are now in the latter part of the growth phase, which is still considered to have some growth potential. Big super markets are still in the early part of their growth stage although they were introduced 20 years ago. Meanwhile, retail businesses such as convenience stores, supermarkets, mail order houses, and warehouse stores are entering the middle growth phase and are expected to continue with their quantitative growth. At a time when most retail businesses in Korea are in a state of development or in the full growth stage, what kind of new innovative retailing will appear and develop? Moreover, what growth engine will drive it? This study analyzes the appearance of innovative retailing and its development process by establishing a discussable consumer's choice model through the interlocking mutual behavior of differentiated competitiveness and consumers' choice based on an awareness of this issue. The analysis of the results of this study can be summarized as follows. First, if a new vacuum zone emerges at the retail market level, innovative retailing such as low price/low service or high price/high service will emerge simultaneously. Second, if the number of new businesses in the vacuum zone increases, this will create competitiveness among the businesses, and each retailer will develop raising of level. Third, if a new business that raises the level develops, competition between the new and the existing retailer will occur, and an assimilation process between the existing retailing and the new retailing will be unfolded. Fourth, each retailing will promote distribution innovations in order to break the frontier of the existing distribution technology, and other retailing will follow the innovator. On the basis of an analysis of the abovementioned results, this study presents the following three suggestions. First, responding to the consumer's decision-making process on the attributes of retail shops that promote differentiation in strategies, this study established a consumer's choice model that can be discussed in relation to changes in market share. Second, this study provided an analysis of the emerging and developmental processes of innovative retail businesses using a more precise logical structure on the basis of the consumer's choice model described in this study. Third, the development process of retail businesses discussed in this study presented retailing solutions regarding management aspects on how to compose a strong retail mix that can help retail businesses gain competitive advantages in the market.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.195-201
• /
• 2012

It is important to determine the optimum harvesting time that impact decisively on the quality of vegetable waxy corns. In general, it takes 20~25 days from silking to harvest according to ecotype when waxy corn hybrids were sown in April. We identified the optimum harvesting time by the ecotypes and seeding dates for the establishment of corn double cropping system of waxy corn. It takes 23~25 days from silking to harvest regardless of ecotype, when waxy corns were sown at early in April or late in June. It takes 28~31 days when Chalok1, early maturing type, was sown between in July 10, and in July 30. It takes 29~31 days when Ilmichal, medium late maturing type, was sown between in July 10 and in July 20, but 39 days were required when sown at in July 30. The cumulative temperature for harvesting was about $1700^{\circ}C{\sim}2100^{\circ}C$. The minimum cumulative temperature from seeding to harvest was approximately $600^{\circ}C$. These results will be helpful to the farmers for determining the optimum harvest time of vegetable waxy corns.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.137-148
• /
• 2010

The Myoungbong mine located in Boseong-gun, Jellanamdo consists of Au-Ag bearing quartz veins which filled the fissures of Bulguksa granitic rocks of Cretaceous. The tailings obtained from the Myungbong mine were used to investigate the effects of various processes, such as oxidation of primary sulfides and formation(alteration) of secondary and/or tertiary minerals, on arsenic immobilization in tailings. This study was conducted via both mineralogical and chemical methods. Mineralogical methods used included gravity and magnetic separation, ultrasonic cleaning, and instrumental analyses(X-ray diffractometry, energy-dispersive spectroscopy, and electron probe microanalyzer) and aqua regia extraction technique for soils was applied to determine the elemental concentrations in the tailings. Iron (oxy)hydroxides formed as a result of oxidation of tailings were identified as three specific forms. The first form filled in rims and fissures of primary pyrites. The second one precipitated and coated the surfaces of gangue minerals and the final form was altered into yukonites. Initially, large amounts of acid-generating minerals, such as pyrite and arsenopyrite, might make the rapid progress of oxidation reactions, and lots of secondary minerals including iron (oxy)hydroxides and scorodite were formed. The rate of pH decrease in tailings diminished, in addition, as the exposure time of tailings to oxidation environments was prolonged and the acid-generating minerals were depleted. Rather, it is speculated that the pH of tailings increased, as the contribution of pH neutralization reactions by calcite contained in surrounding parental rocks became larger. The stability of secondary minerals, such as scorodite, were deteriorated due to the increase in pH, and finally arsenic might be leached out. Subsequently, calcimn and arsenic ions dissociated from calcites and scorodites were locally concentrated, and yukonite could be grown tertiarily. It is confirmed that this tertiary yukonite which is one of arsenate minerals and contains arsenic in high level plays a crucial role in immobilizing arsenic in tailings. In addition to immobilization of arsenic in yukonites, the results indicate that a huge amount of iron (oxy)hydroxides formed by weathering of pyrite which is one of typical primary minerals in tailings can strongly control arsenic behavior as well. Consequently, this study elucidates that through a sequence of various processes, arsenic which was leached out as a result of weathering of primary minerals, such as arsenopyrite, and/or redissolved from secondary minerals, such as scorodite, might be immobilized by various sorption reactions including adsorption, coprecipiation, and absorption.

• Journal of KIISE:Software and Applications
• /
• v.32 no.11
• /
• pp.1021-1028
• /
• 2005

The general solution for classification and regression problems can be found by matching and modifying matrices with the information in real world and then these matrices are teaming in neural networks. This paper treats primary space as a real world, and dual space that Primary space matches matrices using kernel. In practical study, there are two kinds of problems, complete system which can get an answer using inverse matrix and ill-posed system or singular system which cannot get an answer directly from inverse of the given matrix. Further more the problems are often given by the latter condition; therefore, it is necessary to find regularization parameter to change ill-posed or singular problems into complete system. This paper compares each performance under both classification and regression problems among GCV, L-Curve, which are well known for getting regularization parameter, and kernel methods. Both GCV and L-Curve have excellent performance to get regularization parameters, and the performances are similar although they show little bit different results from the different condition of problems. However, these methods are two-step solution because both have to calculate the regularization parameters to solve given problems, and then those problems can be applied to other solving methods. Compared with UV and L-Curve, kernel methods are one-step solution which is simultaneously teaming a regularization parameter within the teaming process of pattern weights. This paper also suggests dynamic momentum which is leaning under the limited proportional condition between learning epoch and the performance of given problems to increase performance and precision for regularization. Finally, this paper shows the results that suggested solution can get better or equivalent results compared with GCV and L-Curve through the experiments using Iris data which are used to consider standard data in classification, Gaussian data which are typical data for singular system, and Shaw data which is an one-dimension image restoration problems.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.275-281
• /
• 2018

It is known that he pollutant emitted from the combustion process of marine fuel oil causes air pollution and harmful effects to the human body. Accordingly, IMO regulates pollutants emitted from ships. However, the regulation of Particulate Matter (PM) is still in the process of debate, so preemptive action is needed. Fundamental research on PM is essential. In this study, the Dimensionless Light Extinction Constant ($K_e$) of fuel oil used in marine diesel engines was measured and analyzed to construct the basic data of the PM generated from marine-based fuel oil. The fuel oil used in the land diesel engine was measured in the same way for character comparison. Both fuel oils differ in sulfur content and density. The $K_e$ was measured via the optical method using a 633 nm laser and was determined by using the volume fraction of PM collected by the gravimetric filter method. The $K_e$ of the PM discharged from marine fuel oil is 8.28, and the land fuel oil is 8.44. The $K_e$ of two fuel oils was similar within the measurement uncertainty range. However, it was found by comparison with the value obtained by the Rayleigh-Limit solution that the light scattering portion could be large. Also, it was found that light extinction characteristics could be different due to the relationship between light transmittance and collected mass.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.372-380
• /
• 2009

After supercritical water treatment of poplar wood meals (passed through 60 mesh) for 60s between 325 and $425^{\circ}C$ at the fixed pressure at $220{\pm}10atm$, some solid residues were present in the degradation products. They mainly consisted of chemically modified lignin and fibrous materials. Glucose and xylose were identified as main sugar components of fibrous materials, and the highest ratio of glucose/xylose was achieved at the highest reaction temperature. As reaction temperature was elevated, the portion of fibrous materials decreased in the solid residues, while lignin was further accumulated. The H : G : S ratio of lignin in solid residues was estimated by analytical pyrolysis. Irrespective of reaction temperatures, the H:G:S ratios were not significantly changed in the lignin in solid residues. Compared to poplar milled wood lignin (MWL), it was remarkable that H type monomers were further lowered, while portion of S type monomers increased. The amount of G type monomers were relative stable. In presence of HCl catalyst, lowering H type as well as enhancing S type was further distinguishable. According to the result of nitrobenzene oxidation (NBO), ca. 265 mg of vanillin and syringaldehyde was yielded from poplar MWL as main products. However, remarkably reduced amount of NBO products were determined from solid residues by raising operating temperature as well as by the addition of HCl catalyst. These results strongly indicate that $\beta$-O-4 linkage could be easily cleaved during supercritical water treatment, so that the lignins in the solid residues seem to be condensed phenol polymers, which are mainly formed by carbon-carbon linkages rather than $\beta$-O-4 linkage.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.4
• /
• pp.233-245
• /
• 2007

The purpose of this study is to investigate the appropriate way of essay writing education which helps the learners perceive and express a stream of knowledge through Home Economics education curriculum by themselves. While one-way type, which teachers just give instructions to students and students just learn from them, has dominated the education, new education focuses on interactive and reciprocal way in thinking and researching together. This new stream requires appropriate and various education method as well as the new concept of education curriculum. This study applies the curriculum of the German practical philosophy that recently has been a debated topic in Home Economics education. The purpose of the curriculum pursuits improving students' practical and critical thinking competence and essay writing is the center of it. In the curriculum learners write essays by asking and answering the questions through seven areas which students can experience based on three angles such as individual, social, and idealogical viewpoints. In this process learners don't remain in the individual angles and are able to be trained as intellectuals who can lead the social and cultural change as well as the individual growth by getting an insight into the idealogical angles. The Germany curriculum what is mentioned in advance presents one possibility that essay education can be introduced in Home Economics education that has accessed the education process by the practical inference based on the practical philosophy. That is, Home Economics education shares the context with essay education whose purpose is the intellect enlightenment because the former is the curriculum to make students build the abilities to access in many-sided angles not just one point, to deal with problems wisely, and to deduce the solutions. Therefore, students are expected to participate in the class dynamically by being satisfied intellectually abreast of practical essay education that helps learners read the stream of knowledge through Home Economics education. In this manner the category of Home Economics education will enlarge by making efforts to diversify the education methodology not staying only one method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.1
• /
• pp.74-83
• /
• 2010

This study is a development plan of a resort in a regional center that aims to generate tourism consumptions that have ripple effects on the regional economy by developing abandoned mine complexes in Daechon. Thanks to economic growth, the public awareness of tourism has changed. Hence, want for tourism influences development and advancement of recreational spaces, combining with various cultural contents. Development associated with environmental issues caused by modernization has become a major issue. At this point, to rediscover and specialize industrial complexes of bygone days as tourism resources signifies regeneration of regional resources. This study aims to find a solution for appropriate tourism development as part of the measures to revitalize the regional economy in underdeveloped areas and to improve the polluted environment. The result of the study is summarized as follows: First, in regional development alongside the development of a resort complex, it is important to construct environmental similarities. Minimizing differences in landscape structures is especially necessary because it will cause tourism resources in a regional center to be naturally linked to regional activities. These will then be recognized as attractions in the neighborhood. Therefore, it is desirable to reflect a spatial structure for environmental convergence, and, at the same time, to fulfill operation purposes by space through differentiation of movement lines. Second, in utilization of existing environmental resources, it is desirable to express localities and to develop differentiated elements. Facilities should not be homogenized, attaching importance to trends. Therefore, in establishing a development plan, it is important to have an attitude to accept existing roles and functions in a transformative manner. Third, recreational facilities in resort spaces generally have the problems of being uniformly planned as part of a development project and being limited to landscape facilities. Introduction of specialized facilities that can be reconciled with the regional environment and that can be open influences the landscape structure of the entire region and brings ripple effects as key facilities for activation of tourism.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.179-186
• /
• 2006

Two types of $TiO_2$, nanotube and nanoparticle, were used for the mesoporous coatings by doctor blade technique followed by calcining at $450^{\circ}C$. The coatings were used as working materials for dye-sensitized solar cells (DSCs) later on and their photovoltaic characterization was carried out. The nanoparticle was synthesized from hydrogen titanate nanotube by hydrothermal treatment at $180^{\circ}C$ for 24 hr. The solar energy conversion efficiency (${\eta}$) of DSCs prepared by this nanoparticle reached 8.07％ with $V_{OC}$ (open-circuit potential) of 0.81 V, $I_{SC}$ (short-circuit current) of $18.29mV/cm^2$, and FF (fill factor) of 66.95％, respectively. For the preparation of nanotube, the concentration of NaOH solution varied from 3 M to 5 M. In the case of DSCs fabricated with nanotubes from 3 M NaOH solution, the ${\eta}$ reached 6.19％ with $V_{OC}$ of 0.77 V, $I_{SC}$ of $12.41mV/cm^2$, and FF of 64.49％, respectively. On the other hand, in the case of 5 M solution, the photovoltaic ${\eta}$ was decreased with 4.09％ due to a loss of photocarriers. In conclusion, it is demonstrated that the solar energy conversion efficiency of DSCs made from $TiO_2$ nanoparticle showed best results among those under investigation.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.161-172
• /
• 2011

Open beaker digestion method is routinely used as the sample preparation technique for trace element determination of rock samples by inductively coupled plasma mass spectrometry, With this method, however, dissolution of Zr and Hf is not always guaranteed especially when the samples contain refractory minerals. In this study, glass bead digestion technique was compared with conventional open beaker digestion technique for the sample preparation of three USGS rock standards such as AGV-2, BHVO-2, and G-3. Thirty trace elements including rare earth elements were analysed by ICP-MS and ICP-AES. There were no clear differences in analytical results for the AGV-2 and BHVO-2 standards between the two techniques, but Zr, Hf, Y, and middle- to heavy- rare earth element concentrations of the G-3 standard prepared by open beaker digestion technique were significantly lower than the recommended values. This can be attributed to the presence of refractory mineral zircon. On the contrary, all the analytical results of the G-3 standard prepared by glass bead digestion technique were in good agreement with the recommended values, indicating complete dissolution of zircon. The analytical results show that the volatile elements such as Pb and Zn were not lost during the preparation of glass bead. Low dilution glass bead digestion technique described here will be very helpful to enhance precision and accuracy of trace element analysis for geological samples containing refractory minerals.