• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.261-266
• /
• 2009

All of the subjects of the investigation (n=141) were schools that have food services under direct management. The number of students who get food services at the schools were $1,001{\sim}1,500$ students with 46.8% investigation. In school food services, fried foods were highly preferred and the biggest merits of fried foods were (in order of highest importance) 'improvement of food services satisfaction'> 'source of calories supply'> 'easiness of cooking process'. Service frequency of fried food were in the order of 'twice a week'> 'three times a week'> 'once a week', and for the factors to decide service frequency of fried food, 'preference leaning on fried food', and 'excessive fat intake' were the most considered. The most considered factors in the case of choosing fried food were 'preference' and 'calories and nutritional value'. For the cautious steps during the frying process, 'keeping after frying' was picked the most, and the reasons were 'lack of containers to keep in appropriate temperature and quality' and 'time consuming'. For preference and service frequency of ingredients in fried foods, 'chicken' and 'pork' were very high. As the result, it was analyzed that preference by ingredients matched service in school lunches by using a ranking test. Total cooking and processing time of fried foods required in school lunches were approximately $237{\pm}99$ minutes ${\sim}291{\pm}141$ minutes which showed total required time was about same no matter what ingredients were used. As the result of comparing and analyzing the processes, vegetables took less thawing and frying time, but the processing time for vegetables was more complicated since handling time before frying was longer compared to meat. In the important management process by the main groups of fried foods, the frying process was the most cautious cooking process in the category of meat or fish and shellfish used as ingredients. In addition, if vegetables were used as ingredients, storing it after frying was the process that needed the most care.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.224-243
• /
• 2014

This study examined the materials and casting technology(cast, alloy, etc.) used in the manufacturing of bronze artifacts based on old literature such as Yongjae Chonghwa, Cheongong Geamul, and The Korea Review. In the casting experiment for restoration of Sangpyong Tongbo, a bronze and brass mother coin mold was made using the sand mold casting method described in The Korea Review. The cast was comprised of the original mold plate frame, wooden frame, and molding sand. Depending on the material of the outer frame, which contains the molding sand, the original mold plate frame can be either a wooden frame or steel frame. For the molding sand, light yellow-colored sand of the Jeonbuk Iri region was used. Next, the composition of the mother alloy used in the restoration of Sangpyong Tongbo was studied. In consideration of the evaporation of tin and lead during actual restoration, the composition of Cu 60%, Zn 30%, and Pb 10% for brass as stated in The Korea Review was modified to Cu 60%, Zn 35%, and Pb 15%. For bronze, based on the composition of Cu 80%, Sn 6%, and Pb 14% used for Haedong Tongbo, the composition was set as Cu 80%, Sn 11%, and Pb 19%. The mother coin mold was restored by first creating a wooden father coin, making a cast from the wooden frame and basic steel frame, alloying, casting, and making a mother coin. Component analysis was conducted on the mother alloy of the restored Sangpyong Tongbo, and its primary and secondary casts. The bronze mother alloy saw a 5% increase in copper and 4% reduction in lead. The brass parent alloy had a 5% increase in copper, but a 4% and 12% decrease in lead and tin respectively. Analysis of the primary and secondary mother coin molds using an energy dispersive spectrometer showed that the bronze mother coin mold had a reduced amount of lead, while the brass mother coin mold had less tin. This can be explained by the evaporation of lead and tin in the melting of the primary mother coin mold. In addition, the ${\alpha}$-phase and lead particles were found in the mother alloy of bronze and brass, as well as the microstructure of the primary and secondary coin molds. Impurities such as Al and Si were observed only in the brass mother coin mold.

• Pediatric Infection and Vaccine
• /
• v.26 no.2
• /
• pp.81-88
• /
• 2019

Purpose: Early detection of Mycoplasma pneumoniae is important for appropriate antimicrobial therapy in children with pneumonia. This study aimed to evaluate the diagnostic value of a rapid antigen test kit in detecting M. pneumoniae from respiratory specimens in children with lower respiratory tract infection (LRTI). Methods: A total of 215 nasopharyngeal aspirates (NPAs) were selected from a pool of NPAs that had been obtained from children admitted for LRTI from August 2010 to August 2018. The specimens had been tested for M. pneumoniae by culture and stored at $-70^{\circ}C$ until use. Tests with Ribotest $Mycoplasma^{(R)}$ were performed and interpreted independently by two investigators who were blinded to the culture results. Results: Among the 215 NPAs, 119 were culture positive for M. pneumoniae and 96 were culture negative. Of the culture-positive specimens, 74 (62.2%) were positive for M. pneumoniae by Ribotest $Mycoplasma^{(R)}$, and 92 of the 96 (95.8%) culture-negative specimens were negative for M. pneumoniae by Ribotest $Mycoplasma^{(R)}$. When culture was used as the standard test, the sensitivity and specificity of Ribotest $Mycoplasma^{(R)}$ were 62.2% and 95.8%, respectively. Additionally, the positive predictive value, negative predictive value, and overall agreement rates with Ribotest $Mycoplasma^{(R)}$ were 94.9%, 67.2%, and 77.2%, respectively. Conclusions: A positive test result of Ribotest $Mycoplasma^{(R)}$ suggests a high likelihood of culture-positive M. pneumoniae infection. However, a negative test result should be interpreted with caution because nearly one-third of negative test results reveal culture-positive M. pneumoniae infections.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.4
• /
• pp.524-530
• /
• 2008

In this study, the effects of feed containing citrus byproducts on the physicochemical characteristics and palatability of Korean native chickens were investigated. The Korean native chickens used in this study were divided into two groups: T0 (chickens that were not fed citrus byproducts until they were 39 weeks old) and T1 (chickens that were fed citrus byproducts). The feed given to the T1 chickens was the same as that given to the T0 chickens for the first 16 weeks. Between weeks $17{\sim}39$, the feed given to the T1 chickens was prepared by adding 4% of the citrus byproducts to the feed given to the T0 chickens. The chickens used in the experiment were chilled for 2 days after being sacrificed. The feed containing citrus byproducts did not cause any statistically significant differences in the breast and thigh characteristics of lightness ($L^*$ value), redness ($a^*$ value), yellowness ($b^*$ value), water-holding capacity, frozen loss, thawing loss and boiling loss. As for the rheological properties, there was no statistically meaningful difference in the breast/thigh characteristics of springiness, cohesiveness, gumminess, and chewiness between the T0 and T1 chickens. However, hardness and shear force were significantly lower in the T1 chickens than in the T0 chickens (p<0.05). The acid and peroxide values were also lower in the T1 chickens than in the T0 chickens, but the difference was not statistically significant. Antioxidant activity was better in the T1 chickens than in the T0 chickens. Thus, the results of the present study show that consumption of citrus byproducts did not affect the color and smell of raw meat. The palatability of boiled meat was significantly better in the T1 chickens than in the T0 chickens.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.87-90
• /
• 2013

The average annual and winter ambient air temperatures in Korea have risen by $0.7^{\circ}C$ and $1.4^{\circ}C$, respectively, during the last 30 years. Due to climate change, the occurrence of abnormal weather conditions has become more frequent, causing damage to vegetable crops grown in Korea. Hot pepper, chinese cabbage and radish, the three most popular vegetables in Korea, are produced more in the field than in the greenhouse. It has been a trend that the time for field transplanting of seedlings is getting earlier and earlier as the spring temperatures keep rising. Seedlings transplanted too early in the spring take a longer time to resume the normal growth, because they are exposed to suboptimal temperature conditions. This experiment was carried out to figure out the change of cellular tissue of chinese cabbage under the condition of low temperature to provide the information regarding the coming climatic change, on the performance of 'Chunkwang' chinese cabbage during the spring growing season. In our study, plant height, number of leaf, chlorophyll and leaf area was lower at the open field cultivation than heating house treatment after transplanting 50 days. Especially in fresh weight, compared with heating treatment, open field and not heated treatment were notably low with the 1/3 level. Of damage symptoms due to low temperature cabbage leaves about 10 sheets when $-3.0^{\circ}C$ conditions in chinese cabbage was a little bit of water soaking symptoms on the leaves. $-7.4^{\circ}C$ under increasingly severe water soaking symptoms of leaf turns yellow was dry. Microscopy results showed symptoms of $-3.0^{\circ}C$ when the mesophyll cell of palisade tissue and spongy tissue collapse, $-7.4^{\circ}C$ palisade tissue and spongy tissue was completely collapsed. The result of this study suggests that the growers should be cautioned not to transplant their chinese cabbage seedlings too early into the field, and should be re-transplanting or transplanting other plants if chinese cabbage are exposed to suboptimal temperature conditions ($-3.0^{\circ}C$ or $-7.4^{\circ}C$).

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.99-106
• /
• 2020

Changam, Lee Samman(1770~1845), who created his own handwriiting to be referred to as the three great writers of the late Joseon Dynasty, invented as the original 'Haengunyusu Typeface' and developed Calligraphy spirit of DonggugJinche in Honam province. He ultimately pursued the state of tonglyeong by raising the personality of 'writing is the person's personality' and the attitude of learning the old. Through the book chang-amseogyeol, he basically polished Haeseo of Han Dynasty and Wi Dynasty and emphasized that Haengseo and Choseo are done automatically when muscle strength and bone strength are established. And since calligraphy originated from 'nature', it goes through the 'Beobcheongwijin' spirit. After doing so, expressed the state of tonglyeong of " mubeob-ibeob ", the stage of reaching. In addition, Changam showed the aesthetic that you can get the novelty by pursuing the philosophy of 'Wu' and the 'beauty of Stupid and Lacking' based on LaoTzu and ChuangTzu. This is a philosophy that follows nature's logic to reveal nature's nature. And it is an aesthetic that protects his 'True Wu' without knowing and greedy. On the other hand, Changam promoted natural and vital beauty through force in the method of using the brush. He suggested the 'Push and Hard' of the Han dynasty, pushing it with force using this power properly. In particular, the feeling of an IlunMujeog brush in 『Changam Calligraphy-The cloud stays Poem』 overflows with the vitality and bizarre and strange dynamism of the spirit and typeface as eum-yang harmonizes with each other. In addition, the beauty of Push and Hard containing polyeoghamse is misaligned, but it has achieved a natural aesthetic without invading. This work demonstrates the real look of Changam choseo. In addition, the beauty of Push and Hard containing polyeoghamse is misaligned, but it has achieved a natural aesthetic without invading. Changam proves the real look of "Haedong's best Chose Maestro".

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.1
• /
• pp.33-39
• /
• 2010

Objective: Birth sex ratio (BSR) with human IVF-ET program is an interesting subject of social and scientific issue but very little information is available in Korea. This study was performed to assess the BSR with IVF-ET and to suggest the effective factors on the BSR. Methods: The national data from 1991~2008 were obtained from governmental Statistics Korea and the delivery data of human IVF-ET program on 2007 and 2008 were provided from the Ministry for Health, Welfare and Family Affairs. The BSR were statistically analyzed according to methods of IVF and to transferred embryos from fresh or frozen-thawed cycles. Results: The BSRs of Korean populations were over 1.10 up to 2002, and then it declined and maintained to 1.06 as balance BSR on 2007 and 2008. In human IVF-ET program, the BSRs were 1.07 on 2007 and 1.06 on 2008, respectively. Conventional IVF on 2008 showed the highest BSR as 1.10, and ICSI the lowest on 2008 as 1.01. There was no significant difference of BSRs related to the methods of in vitro fertilization and the feature of transferred embryos. Conclusion: The BSR of Korea showed 1.06~1.07 as normal and balanced state on 2007 and 2008 both general populations and human IVF-ET program. To the best of our knowledge, this is the first study to evaluate the BSR of human IVF-ET in Korea. There is a need to expand the further studies for national statistics and influencing factors on the BSR with IVF-ET.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.356-363
• /
• 2009

The purpose of this study was to evaluate the viability of periodontal ligament cells in rat teeth using slow cryo-preservation method under pressure by means of MTT assay and WST-1 assay. Eighteen teeth of Sprague-Dawley white female rats of 4 week-old were used for each group. Both sides of the first and second maxillary molars were extracted as atraumatically as possible under Tiletamine anesthesia. The experimental groups were group 1 (Immediate control), group 2 (Cold preservation at $4^{\circ}C$for 1 week), group 3 (Slow freezing), group 4 (Slow freezing under pressure of 3 MPa). F-medium and 10% DMSO were used as preservation medium and cryo-protectant. For cryo-preservation groups, thawing was performed in $37^{\circ}C$water bath, then MTT assay and WST-1 assay were processed. One way ANOVA and Tukey method were performed at the 95% level of confidence. The values of optical density obtained by MTT assay and WST-1 were divided by the values of eosin staining for tissue volume standardization. In both MTT and WST-1 assay, group 4 showed significantly higher viability of periodontal ligament cells than group 2 and 3 (p < 0.05), but showed lower viability than immediate control group. By the results of this study, slow cryo-preservation method under pressure suggests the possibility for long term cryo-preservation of the teeth.

• The Korean Journal of Blood Transfusion
• /
• v.29 no.3
• /
• pp.253-261
• /
• 2018

Background: A massive blood transfusion (MT) requires significant efforts by the Blood Bank. This study examined blood product use in MT and emergency O Rh Positive red cells (O RBCs) available directly for emergency patients from the Trauma Center in Ajou University Hospital. Methods: MT was defined as a transfusion of 10 or more RBCs within 24 hours. The extracted data for the total RBCs, fresh frozen plasma (FFP), platelets (PLTs, single donor platelets (SDP) and random platelet concentrates (PC)) issued from Blood Bank between March 2016 and November 2017 from Hospital Information System were reviewed. SDP was considered equivalent to 6 units of PC. Results: A total of 345 MTs, and 6233/53268 (11.7%) RBCs, 4717/19376 (24.3%) FFP, and 4473/94166 (4.8%) PLTs were used in MT (P<0.001). For the RBC products in MT and non-MT transfusions, 28.0% and 34.1% were group A; 27.1% and 26.0% were group B; 37.3% and 29.7% were group O, and 7.5% and 10.2% were group AB (P<0.001). The ratios of RBC:FFP:PLT use were 1:0.76:0.72 in MT and 1:0.31:1.91 in non-MT (P<0.001). A total of 461 O RBCs were used in 36.2% (125/345) of MT cases and the number of O RBCs transfused per patient ranged from 1 to 18. Conclusion: RBCs with the O blood group are most used for MT. Ongoing education of clinicians to minimize the overuse of emergency O RBCs in MT is required. A procedure to have thawed plasma readily available in MT appears to be of importance because FFP was used frequently in MT.