• Journal of Navigation and Port Research
• /
• v.33 no.8
• /
• pp.549-554
• /
• 2009

Wind velocity and wind direction are very important in the viewpoint of ship's safety and stability of port structure. The characteristics of wind distribution in the coast of Busan are analyzed for 10 years from 1997 to 2006 using AWS(Automatic Weather System) data. The characteristics of wind distribution of Miryang, is not affected by the land and sea breeze are also examined to understand clearly the characteristics of wind distribution in the coast of Busan. The mean wind velocity in the coast of Busan is stronger than that of Miryang. The mean wind velocitie at Youngdo and Gadukdo stations of Busan are stronger about 2.0 times than those at IlGwang, Haeundae and Daeyeon stations. The correlation a states show that the variation tendencies of monthly mean wind velocitie in the coast of Busan are very similar. The maximum monthly mean velocitie in the coast of Busan are recorded in September. This re ult is closely related to the influence of typhoon. The maximum instantaneous wind velocitie are also strong at Youngdo and Gadukdo stations and the peaks of maximum instantaneous wind $velocit^9$ are observed mainly from August to September. In the coast of Busan, the SW'ly-NNE'ly wind are prevailing in the winter and the SW'ly and NE'ly wind are predomi snt in the spring. w that the vs of wind direction in the summer and athumn are similar with those in the spring and winter, respectively.

• Biomolecules & Therapeutics
• /
• v.18 no.2
• /
• pp.205-210
• /
• 2010

Several studies have shown that plant-derived polyphenols reduce cardiovascular accidents in high-risk patients and the inhibition of platelet function may be responsible for part of this benefit. Lindera obtusiloba is widely used in traditional herbal medicine for the treatment of cardiovascular and inflammatory diseases. Therefore, the antiplatelet and antithrombotic activities of Lindera obtusiloba Extracts (LOE) on in vitro platelet aggregation, radical scavenging activity and in vivo murine pulmonary thrombosis were examined. LOE was able to directly scavenge the stable DPPH radical in a concentration-dependent manner and its $IC_{50}$ value was 3.9 ${\pm}$ 0.1 ${\mu}g$/ml. LOE significantly inhibited collagen- and ADP-induced platelet aggregation in a concentration-dependent manner and its $IC_{50}$ value is 0.9 ${\pm}$ 0.1 mg/ml and 0.4 ${\pm}$ 0.1 mg/ml respectively. The inhibitory effect of LOE was comparable to aspirin ($IC_{50}$ values were 1.0 ${\pm}$ 0.5 and 1.0 ${\pm}$ 0.7 mg/ml, respectively). Furthermore, oral administration of LOE suppressed the death of mice with pulmonary thrombosis induced by intravenous injection of collagen plus epinephrine. Taken together, our results suggest LOE may be a promising candidate for antithrombotic agent, and the antithrombotic effect of LOE may be due to, at least in part, antiplatelet activity.

• International Commerce and Information Review
• /
• v.17 no.3
• /
• pp.299-322
• /
• 2015

Generally Container can be seperated from FCL and LCL. The LCL cargo can be evaluated as a cargo that makes it possible to attract a relatively stable volume and create added value. The aim of this study is to suggest improvement plan for atrracting LCL cargo in Pyeongtaek Port. In order to achieve the object of the study, The research structure is following. 1) analyzing a movement path of the LCL cargo occurring in Pan Yellow-Sea. 2) analyzing the problems to handle LCL cargoes in Pyeongtaek Port. The basic data for analyzing the movement path of LCL Cargoes utilize the data of the Customs Service. and the problems of LCL freight handled suggested from forwarder, carferry liners, and bonded warehouse companies by interview. In this study, We use Fuzzy-AHP as the methodology to analyze the importance of attracting major improvement for LCL shipments in Pyeongtaek Port. As the result, The expansion of inspection equipment and personnel was presented as the most important improvement too solve the clearance problems that is the most serious problems in Pyeongtaek Port. and The realization of incentive payments that local government pay for Profitability of related companies are needed.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.664-671
• /
• 1998

Poly pyrrole polymer(ppy) has an excellent electrical conductivity and can be easily polymerized on anode to give various morophology according to doped anion on electroactive sites. To improve the properties of brittleness, ageing and hydrophobisity, poly furan polymer(pfu) having a high initiation potential was anodically implanted in this porous ppy film matrix to get the Pt/ppy/pfu(x)type of polymer composite electrode. Cyclic voltammetry and electrochemical impedance methods were used to these electrode, where $PF_6^-,\; BF_4^-$, and $ClO_4^-$ ions were employed as dopants. The composition of the pfu(x) at the electrode was changed from 0 to 1.10, but the range was useful only at 0.1 to 0.2 as the redox electrode. The polymer composite electrode doped with $PF_6^-$ was better in charge transfer resistance by a factor of 40 times and in double layer capacitance by a factor of 20 times than others. The charge transfer in the polymer film of the electrode was influenced on frequency change and equivalent circuit of this electrode had Warburg impedance including mass transfer.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1408-1416
• /
• 1990

A powerful and efficient method for finding approximate solutions to initial-boundary-value problems in the transient coupled thermoelasticity is formulated in time domain using the finite element technique with time-marching strategy. The final system equations can be derived by the Guritin's variational principle using the definition of convolution integral. But, the finite element formulation for the equations of motion is modified by differentiating in time. Numerical results to some test problems are compared with analytical and other sophisticated approximate solutions. Stable responces are observed in all the given examples irrespective of incremental time steps and mesh shapes. In addition, it is shown that good numerical results are obtained even in coarser mesh or larger time step comparing to other numerical methods.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.162-167
• /
• 2012

Surface modification of macromolecules renders a progressive and favorable method to enhance the properties of polymeric materials and improves conductivity, wettability, stability, adhesion, antibacterial properties, etc. of polymeric surfaces without deterioration of the polymer bulk properties. Polyolefins such as polyethylene and polypropylene were grafted with maleic anhydride(MAH) as a functional monomer in solution. Evidence for grafting was shown with FTIR measurement. The grafting ratio was determined from chemical titration. The higher MAH loading, the lower contact angle(${\theta}$) was obtained. With the increasing content of MAH, melting temperature($T_m$) of maleic anhydride grafted polymer decreased while decomposition temperature($T_d$) of maleic anhydride grafted polymer increased.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.4
• /
• pp.185-193
• /
• 2022

This paper proposes an adaptive sliding mode control with radial basis function neural network(RBFNN) scheme to enhance the performance of position and attitude tracking control of quadrotor UAV. The RBFNN is utilized on the approximation of nonlinear function in the UAV dynmic model and the weights of the RBFNN are adjusted online according to adaptive law from the Lyapunov stability analysis to ensure the state hitting the sliding surface and sliding along it. In order to compensate the network approximation error and eliminate the existing chattering problems, the sliding mode control term is adjusted by adaptive laws, which can enhance the robust performance of the system. The simulation results of the proposed control method confirm the effectiveness of the proposed controller which applied for a nonlinear quadrotor UAV is presented. Form the results, it's shown that the developed control system is achieved satisfactory control performance and robustness.

• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.307-322
• /
• 2012

The purpose of this paper is to examine determinants of export to the East Asia region, using panel unit root, panel cointegration framework, panel VECM (vector error correction model), panel FMOLS (fully modified OLS). Different panel unit root tests confirm that the data series are integrated processes with unit roots. When applying cointegration tests to long-run effect for aggregate panel data, a primary concern is to construct the estimators in a way that does not constrain the transitional dynamics to be similar among different countries of the panel. The regression equations are estimated by various panel cointegration estimators. The panel data causality results reveal that exchange rates has unidirectional effects on export and GDP, and there exists bidirectional causality between export and GDP. Also, the results from the panel FMOLS tests overwhelmingly reject the null hypothesis of zero coefficient. The panel cointegrating vectors show that the export has positive relationship with the GDP and ODI (overseas direct investment).

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.435-440
• /
• 2010

A numerical model, which can compute deformation of rubble mound structures composed with various size materials, was proposed. In the numerical model, wave field into the mound structures was computed by CADMAS-SURF and the deformations of mound structures were computed by DEM. Interaction between wave field and sectional deformation of structure was considered and to present the variation of behaviors caused by various properties of materials, computation was carried out with random coefficients by Monte Carlo simulation method for contact stiffness and friction angle. The experiments were carried out with rubbles and glass balls with radius of 2.9cm, 2.6cm and 1.5cm. And the deformation characteristics of rubble mounds composed with various size materials were clarified. Furthermore the validity and the applicability of the model were discussed by comparing with the experimental results.

• Journal of Korea Water Resources Association
• /
• v.38 no.5 s.154
• /
• pp.333-343
• /
• 2005

The upwind model is well known to simulate shockwaves, but it is rarely applied to natural rivers because of problems caused by the source terms. Although several methods have been developed to deal with the source terms, none of them has been applied to natural rivers. This paper deals with application of the upwind model to the natural river. An implicit upwind model is applied to a hypothetical irregular channel and a natural river with highly irregular bed, width, and hydraulic structures. Different types of the flows including steady-state flow, flood wave, dam-break wave, and bore are simulated to test accuracy and applicability of the implicit upwind model. It is proved that the model can simulate various types of flows in natural rivers with high accuracy and robustness.