• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.155-161
• /
• 2001

Fundamental studies on the drag reduction of the circular cylinder having dimple were conducted by the measurement of the fluid force acting on the cylinder and by the flow visualization around the cylinder. The drag coefficients were changed by the shape and the geometrical arrangement of the dimple. The drag of the cylinder was reduced about 25% by the proper arrangement of the dimple. The flow field around the cylinder having dimple, which was the minimum drag, was visualized by the hydrogen bubble technique. In this case, the separation points were moved rearward and the wake region was small in comparison with that of the cylinder having no dimple.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.166-171
• /
• 2004

Direct numerical simulations are peformed to investigate the physics of a spatially developing turbulent boundary layer flow suddenly subjected to spanwise oscillating electro-magnetic forces in the near-wall region. The Reynolds number based on the inlet momentum thickness and free-stream velocity is $Re_\theta=300$. A fully-implicit fractional step method is employed to simulate the flow. The mean flow properties and the Reynolds stresses are obtained to analyze the near-wall turbulent structure. It is found that skin-friction and turbulent kinetic energy can be reduced by the electro-magnetic forces. Instantaneous flow visualization techniques are used to observe the response of streamwise vortices to spanwise oscillating forces. The near-wall vortical structures are clearly affected by spanwise oscillating electro-magnetic forces.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.12a
• /
• pp.17-22
• /
• 2005

An experimental study was carried out to investigate the effect of local ultrasonic forcing on a turbulent boundary layer. Stereoscopic particle image velocimetry (SPIV) was used to probe the characteristics of the flow. A ultrasonic forcing system was made by adhering six ultrasonic transducers to the local flat plate. Cavitation which generates uncountable minute air-bubbles having fast wall normal velocity occurs when ultrasonic was projected into water. The SPIV results showed that the wall normal mean velocity is increased in a boundary layer dramatically and the streamwise mean velocity is reduced. The skin friction coefficient ($C_{f}$) decreases $60\%$ and gradually recovers at the downstream. The ultrasonic forcing reduces wall-region streamwise turbulent intensity, however, streamwise turbulent intensity is increased away from the wall. Wall-normal turbulent intensity is almost the same near the wall but it increases away from the wall, In tile vicinity of the wall, Reynold shear stress, sweep strength and production of turbulent kinetic energy were decreased. This suggests that the streamwise vortical structures are lifted by ultrasonic forcing and then skin friction is reduced.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.400-403
• /
• 2007

소형 풍력터빈 설계 시 고려해야 할 익형의 선택, 익형의 붙임각 및 Solidity 등이 터빈의 성능에 미치는 영향을 고찰하였다. 한 개의 익형에 대한 공력계수를 이용하여 수학적 모델링을 통하여 최적 붙임각을 예측하여 경향을 파악하였다. 받음각에 따른 익형의 공력특성을 CFD 기법으로 파악한 후 5개의 Blade를 갖는 Turbine의 성능을 익형의 붙임각에 따라 파악하여 최대 성능을 갖는 붙임각을 최종 산출하였다. 익형 선정시 받음각에 대한 양력/항력 곡선을 이동시키는 캠버 익형의 기능보다는 항력 대양력의 비(L/D) 가 최대인 익형을 선정하는 것이 더욱 중요하며, Blade수가 적을수록 Torque의 양은 증가하고 Blade가 6이상이변 효율이 급격히 감소함을 알 수 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.228-236
• /
• 2011

The analysis of the performance and the internal flow according to various numerical models used for the interior ballistics has been conducted. The internal flow has been mainly affected by the drag model. As results, oscillations of the pressure differences between the breech and the shot base has been reduced with a deceased drag of the propellant. The major performance of the interior ballistics has no relation to the models using Nusselt number for heat transfer coefficient. The negative pressure difference without the heat transfer of the propellant has not been shown.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.13-17
• /
• 2000

해저관로가 노출되어 있을 경우 파도와 조류 등에 의한 외적 하중으로부터 안정적이어야 한다. 트랜치 구간 내의 해저관로에 작용하는 유체 입자의 속도와 가속도는 해저면과 비교하여 볼 때 현저히 감소하므로 감쇄 계수를 사용하여 트랜치 구간 내에 설치되는 해저관로의 안정성을 해석한다. 그러나, 다양한 트랜치 구간의 깊이와 기울기에 대한 감쇄 계수에 대해 많은 자료가 부족하여 실제 설계에는 한정된 계수들이 이용된다. 본 논문에서는 다양한 깊이와 기울기를 가진 트랜치 구간의 실험 모형을 제작하여 회류 수조에서 P.I.V(입자 영상 속도계) 기법을 이용하여 여러 속도에 대하여 실험을 수행하였다. 다양한 트랜치 구간 내의 실린더 주변의 유동 특성과 유체 입자의 수평 속도를 측정하여 항력 감쇄 계수를 산출해 냈으며 실제 해양 공사에서 적용 가능한 안정성 해석 기준을 제시하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.3
• /
• pp.389-395
• /
• 2006

The fluid force reduction of a square prism having fences on the corner was studied by the measuring the drag and lift acting on the prism and by the visualization experiment of the flow around the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was from $Re=0.9{\times}104$ to $Re=2.1{\times}104$. The drag of the prism was reduced about 6.8% and the amplitude of the lift was reduced by attaching two normal fences on the rear corners of the prism. In this case, the separated flow at the front corners was reattached on the upper and lower sides of the prism and the vortex streets at the wake region were appeared more slowly than that of the prototype prism.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.61-62
• /
• 2006

The suppression of fluid force acting on a square prism near plane wall was studied by attaching fences on the comers of the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was $Re=2.0{\times}10^4$. The experimental parameters were the attaching position and numbers of fences, the space ratios $G/B(G/B=0.1{\sim}1.2)$ between prism and plane wall. The average drag coefficients were increased and the average hit coefficients were decreased and increased with the space ratios foulard plane wall. The drag of the prism was reduced average 7.6% with the space ratios by attaching the normal fence at the rear and upper comer and the horizontal normal fence at the rear and lower corner on the prism.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.652-657
• /
• 2003

A wind-tunnel experiment is carried out to examine the applicability of a new passive device, wake disrupter, to flow over a model vehicle for drag reduction. The wake disrupter is a small-size rectangular body attached to a part of the trailing edge of the model vehicle, designed to perturb an essentially two-dimensional nature of wake. A pair of wake disrupter is mounted on the mid-span at the upper and lower trailing edges. From a parametric study about the size of wake disrupter, it is found that the optimum disrupter increases the base pressure by about 20%. Large eddy simulation is also conducted to confirm the experimental result, and shows that the wake is indeed disrupted by the present device.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.49-52
• /
• 2012

21세기인 지금 우리시대에 자동차는 필수적인 교통수단이다. 이런 자동차의 구동을 위해서는 연료가 필요하며, 아직까지 석유가 그 연료의 중심이다. 그러나 지구에서 나오는 석유자원은 매장량의 한계가 보이며, 치솟는 가격뿐만 아니라 세계적으로 고연비 고효율 차량을 선호하기 때문에 연료소비를 최소화하는 방법을 찾아야 한다. 본 연구에서는 차량의 후면 형상에 중점을 두어 주행 시 발생하는 공력특성 중 항력을 감소시키기 위해 EDISON 시뮬레이션 프로그램으로 자동차의 후면 형상 변화에 따른 공력특성 해석과 주행 시 가장 효율적인 최적의 후면 형상을 찾아보았다.