• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.7
• /
• pp.507-514
• /
• 2022

The EO/IR targeting pod mounted on a fighter to acquire information about tactical targets is typically mounted and operated at the bottom of the aircraft fuselage. Since the aircraft equipped with such an external attachment has complexed aerodynamic and inertial characteristics compared to the aircraft flying without an external attachment, a method of system performance analyses is required to identify development risk factors in the early stages of development and reflect them in the design. In this study, a development plan was presented to provide the necessary modeling and simulation tools to develop a pod that can acquire measurement data stably in a highly maneuverable environment. The limiting operating conditions of the pods mounted on the highly maneuverable aircraft were derived, the aerodynamics and inertial loads of the mounted pods were analyzed according to the limiting operating conditions, and a flight data generation and transmission system were developed by simulating the mission of the aircraft equipped with the mounted pods.

• Defense and Technology
• /
• no.4 s.218
• /
• pp.76-87
• /
• 1997

단거리 공대공 유도무기는 일반적으로 자국의 영공 및 비행기지를 공격하는 적의 침입수단인 항공기를 격퇴하는 항공기탑재 유도무기이다. 또한 이 유도무기는 본질적으로 방어개념의 무기이며, 적을 공격하는 경우에는 항공기가 장거리를 운반하는 위험부담률을 안고 단행하는 수 밖에 없다

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.132-133
• /
• 2019

항공기 탑재 전자장비는 항공전원규격 MIL-STD-704에 의하여 항공 체계운용 상태에 따라 규정된 요구사항 충족 및 성능을 유지하여야 한다. 본 논문에서는 AC 115Vac 3상 400Hz 항공기 체계전원을 사용하는 탑재 부하장비의 성능 유지를 위한 DC 270V 전원공급장치의 입력전원 보호회로 구현에 대하여 기술하고 결과를 검증한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.164-172
• /
• 2020

The fuel oil/heat exchanger installed in military aircraft is a device that cools the lubricant oil supplied to other devices, such as an AMAD, and a hydraulic pump using the low temperature of the fuel is cracked at the AMAD lubricant inlet port. If a crack in the heat exchanger occurs, the lubricant oil supplied to other equipment is not cooled. Therefore, the flight can no longer be performed. In this study, non-destructive inspection and microscopic examination of the fracture surface of the oil port were performed to analyze the crack tendency. The oil pipe connected to the oil port is a titanium pipe, which is fastened with over torque and has been identified as the leading cause of heat exchanger oil port cracks. In addition, it was verified as the main reason for cracking by finite element analysis. The material and diameter of the pipe were changed to improve this defect, and the applied torque was adjusted. In addition, the bending value of the pipe was adjusted to minimize the fatigue accumulation due to pulsating pressure. As a result, no cracks occurred on the heat exchanger via the ground test after the installation of an improved pipe under the same conditions.

• ICROS
• /
• v.7 no.5
• /
• pp.28-36
• /
• 2001

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.130-136
• /
• 2002

In this paper, a flight test method is described for the system identification of the unmanned aerial vehicle equipped with an automatic flight control system. Multistep inputs are applied for both longitudinal mode and lateral/directional excitation. Optimal time step for excitation is sought to provide the broad input bandwidth. A programmed mode flight test method provides high-quality flight data for system identification using the flight control computer with the longitudinal and lateral/directional autopilot which enables the separation of each motion during the flight test. In addition, exact actuating input that is almost equivalent to the designed one guarantees the highest input frequency attainable. Several repetitive flight tests were implemented in the calm air in order to extract the consistent system model for the air vehicle. The enhanced airborne data acquisition system endowed the high-quality flight data for the system identification. The flight data were effectively used to the system identification of the unmanned aerial vehicle.

• Defense and Technology
• /
• no.2 s.240
• /
• pp.78-87
• /
• 1999

해상 무인항공기 연구개발은 여러 요소들에 의해 대단히 중요시되고 있는데 그 요소들을 보면 연안 해상 작전에 대한 중요성이 증대되고, 전 세계적으로 많은 국가들의 해군 세력이 중무장한 공격용 소형의 신형 코르벳함들로 등장하고 있으며, 함상탑재용 유인기의 비용이 지나치게 비싸다는 것과 대잠수함전(ASW)에서는 유인기가 매우 중요한 역할을 수행하는 점 때문일 것이다

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.48-55
• /
• 2019

This paper presents a study on Fault History Management Equipment (FHME) of Unmanned Aerial Systems (UAS). UAS comprise of various types of electronic equipment for high reliability design for flight safety. Consequently, it is mandatory for each on-board equipment to have its own Built-In-Test (BIT) function, because rapid fault-detections for UAS are necessary. FHME is developed for the purposes of display, storage and management of such BIT results on ground. This paper describes the outline, development requirements, design and verification process of FHME.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.142-150
• /
• 2008

In order to ensure the individual and mutual performances among the telemetry system, tracking system, flight termination system, GPS, and inertial navigation & guidance system which are installed in the KSLV-I 2nd stage and ground equipment of the Naro space center, flight test using a light airplane is required. Since the high degree of test efficiency is fulfilled through the minute plan and analysis about selection of the equipment which are applicable to the test, harness, operation strategy, and antenna installation. KSLV-I communication environment and flight profile should be precisely taken into account during the flight test. In this document, overall aspect of the KSLV-I 2nd stage equipment specification, a rack for the installation, harness, the airplane specification, and flight route which are required for the effective flight test are presented.

• 한국항공운항학회:학술대회논문집
• /
• 2004.11a
• /
• pp.247-252
• /
• 2004

민항기나 군용항공기의 경우 대부분 항행 안전성을 확보하기 위해 다양한 기능을 수행하는 레이다가 부착되어 있으나, 소형항공기 및 저가의 헬기의 경우 무게, 비용 등의 제약으로 항행 안전을 확보할 수 있는 레이다가 장착되어 있지 않는 실정이다. 따라서 본 연구에서는 민항기 및 군용 항공기뿐만이 아니라 헬기 및 소형항공기에 장착하여 충돌감지, 이착륙보조, 기상관측 등의 기능을 수행할 수 있는 레이다로 35GHz 밀리미터 대역의 항공기 탑재형 레이다의 적용에 대한 제반 요건과 필요성에 대한 연구를 수행하였다. 그리고 제안된 레이다를 이용하면, 저속 항공기 및 헬기에서는 치명적인 사고를 유발시킬 수 있는 전력선 탐지가 가능함을 확인함으로써, 제안된 레이다가 항행 안전성을 높일 수 있음을 보임으로써 밀리미터 대역 레이다의 적용이 가능함을 확인하였다.