• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.194-197
• /
• 2017

Aircraft engine and auxiliary power units are certified in processes of design, production according to airworthiness requirements. The aircraft engines shall demonstrate compliance with the design and production through the Type Certificate and the auxiliary power unit shall demonstrate compliance with the design and production through the Technical Standards Order Approval. MOLIT(Ministry of Land, Infrastructure and Transport) established the law and the airworthiness requirements for aircraft engines such as KAS Part 33 but didn't issue the Technical Standards Order for auxiliary power unit. In this paper, we proposed and explained the plan for improvement of our aircraft engines industry through building and expanding the certification infra-structure for aircraft engines and auxiliary power unit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.188-195
• /
• 2012

Many systems are developing for the realization of NCW(Network Centric Warfare). UAV(Unmanned Aerial Vehicle) Network is attracting attention in a lot of military applications. In general, UAVs have the potential to create an ad-hoc network and greatly reduce the hops from source to destination. However, UAV networks exhibit unique properties such as high mobility, high data rate, and real time service. The routing protocols are required to design the multi-hop routing protocols that can dynamically adapt to the requirements of UAV network. In this paper we analyse Geographic Routing Protocol is based on geographical distance between source and destination for efficient and reliable transmission. Geographic Routing Protocol is evaluated in video service scenarios with TDMA model in our simulation. The simulation results show that the performance of Geographic Routing Protocol is better than the MANET Routing Protocol in terms of packet received ratio, end to end delay, and routing traffic sent.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.60-66
• /
• 2010

This paper deals with a post-processing of GPS receiver data in order to acquire a reference flight trajectory of an aircraft test. The flight test using an aircraft that is carried out several times since 2007 is the integrated test to verify the performance of the tracking and communications facilities in Naro Space Center and Jeju Tracking Center. In order to analyze performance of the tracking and navigation equipments, true reference data should be used for performance comparisons. Therefore off-the-shelf commercial GPS receiver, DL-V3 made by NovAtel Inc., is operated on the test to collect the GPS navigation data and the collected data is post-processed by GrafNav which is the off-the-shelf post-processing program made by NovAtel Inc. Through the post-processing of the collected data, a reference trajectory is generated with small error range about several decade centimeter level.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.37-72
• /
• 2016

In the aerospace field, besides special purpose airplanes, contracts for supply of various types of products such as prototypes, unmanned aerial vehicles and space launch vehicles are increasing. In the case of the contractor, it was planned to spend a large amount of money to supply the production, but if the purchase specification that presents the quality and performance standard of the product is poor or lacks the capacity to judge the performance, consuming enormous amounts of time and money. Even if the undertaker does not have the ability to supply the products with the required performance and quality to achieve the purpose of the contract, he/she must pay the cost of burial due to the incompleteness of the work and the compensation for the cancellation of the contract. In this case, the defendant ordered the plaintiff to supply the aircraft by the Happy Box method, which is capable of ILS Offset flight as specified in the Purchase Specification, but the plaintiff attempted to supply the aircraft by the RNAV method. Although the ILS ground signal can be inspected by the RNAV method, the aircraft manufactured in the manner claimed by the plaintiff does not have the ILS Offset flight function required by the purchase specification, so the defendant can not achieve the purpose required by the purchase specification. It was a question of whether a defendant's cancellation of contract was legitimate. The aircraft, which is the object of this contract, is a subordinate substitute, so the case contract is of undertaking. Therefore, in order to complete the work in this contract, the major structural parts of the aircraft must be manufactured as agreed and have the performance generally required in the social sense. However, the aircraft delivered by the plaintiff has serious defects because the defendant can not achieve the purpose required by the purchase specification due to the lack of the ILS Offset flight function required by the purchase specification. This deficiency is impossible for the plaintiff to repair, so the defendant 's cancellation of the contract is legitimate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.37-37
• /
• 2000

복합재료는 높은 무게비 강도 및 강성뿐만 아니라 우수한 재료 특성 때문에 경량화와 구조적 안전성이 요구되는 항공기의 구조재로서 사용이 증대되고 있다. 소형 민용항공기는 구조적 안전성과 함께 제작과 정비, 유지보수의 용이성이 중요시된다. 본 연구에서는 복합재료를 구조재로 사용하였을 때의 성능변화와 경량화 등을 검토하기 위하여 기존의 알루미늄 합금을 이용하여 설계된 소형 프로펠러 경항공기 날개의 구조재로서 복합재료를 사용하여 재설계하였다. 날개의 기본 구조는 스킨, 스파, 웹으로 구성된 상자형 단면으로 설계하였으며 날개의 구조재로서 탄소/에폭시를 사용하여 상용 유한요소해석코드인 NISAII를 이용하여 굽힘, 좌굴 등의 응력해석을 수행하였고 기존 설계된 날개와의 성능비교를 위하여 알루미늄 합금으로 설계된 날개를 모델링하여 해석한 결과와 비교하였다. 비교결과 구조재로 탄소/에폭시를 사용하여 설계된 날개가 무게비 성능면에서 더 우수함을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2546-2548
• /
• 2005

본 논문에서는 무인항공기의 비행제어시스템 개발 및 성능분석을 위한 HILS(Hardware-in-the-Loop-Simulation) 시스템의 구축을 제안한다. 제안한 HILS 시스템은 실시간 시뮬레이션 컴퓨터(dSPACE DS1005), 3축 모션테이블, 자세 센서, 지상통제장치(GCS; Ground Control Station), 비행제어컴퓨터(FCC; Flight Control Computer)로 구성된다. 실제 신호와 유사한 신호를 발생시키기 위한 실시간 시뮬레이션 컴퓨터는 dSPACE가 담당하며, 이 신호는 비행운동을 재현을 위한 3축 모션테이블을 동작시키게 된다. 모션테이블 상에 위치하는 자세센서 값과 GCS의 명령은 FCC의 입력으로 사용된다. 구현된 HILS 시스템을 이용하여 UAV의 제어알고리즘 및 자세센서 성능 검증을 수행하였다.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.122-130
• /
• 2012

Airborne separation assurance is a key requirement for Free Flight. This paper is to propose autonomous flight algorithm, such as extended authority of delegation, efficiency of airspace issue to deal with the empirical solution for free flight, and to measure flight efficiency and conflict detection and resolution (CD&R) by utilizing flight performance data under the two circumstances of scenario with the modeling of proposed algorithm and potential field algorithm. The results show that the autonomous flight algorithm is superior to the potential field algorithm under the circumstances of free flight airspace in terms of algorithm performance, CD&R, and flight efficiency.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.89-92
• /
• 2012

초음속 항공기를 설계하는데 있어서 일반적인 항공기와는 다른 성능이 요구되는데 그것은 바로 초음속에 의한 충격파가 발생시키는 추가적인 항력을 감소시키는 일이다. 날개의 Airfoil 형상을 결정하기 위해서는 공력 특성을 파악해야 하는데, 이를 알아보는 데 있어서 EDISON_CFD를 사용하였다. 충격파의 생성을 지연시키는 Supercritical Airfoil의 여러 형상에 필요한 격자를 생성하여 비점성, 압축성 유동 해석을 수행하였다. 비교에 필요한 다섯 개의 NASA Supercritical Airfoil을 선정하여, 아음속과 초음속으로 나누어 받음각에 따른 양력계수와 항력계수를 도출하고, 이를 토대로 양항비를 추정해 보았다. 추려진 것 중 가장 우수한 공력성능을 보이는 airfoil을 선정하였는데 그 결과 NASA SC-0403 airfoil의 공력 성능이 가장 뛰어나 그것을 선정하기로 하였고, 또한 2차원 공력 해석에서 얻은 양력계수를 면적에 대하여 적분하여 날개에서의 양력과 항력을 추정하였다.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2013

In the next generation of ATM, ADS-B(Automatic Dependent Surveillance-Broadcast) and multilateration are the main technology recommended by ICAO(International Civil Aviation Organization). However, there are a lot of non-equipped ADS-B aircraft today. Therefore, TIS-B(Traffic Information Service-Broadcast) provides traffic information, which has obtained from radars for non-equipped ADS-B aircraft. In this paper, we presented an onboard multilateration system for non-equipped ADS-B aircraft using SSR(Secondary Surveillance Radar) signal instead of TIS-B. TIS-B has a lot of error because of using radar data, but multilateration has less error than radar because of using TDOA(Time Difference of Arrival) method. Results of performance analysis show that the position accuracy is improved by the proposed method using on-board multilateration.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.141-149
• /
• 2018

This paper presents a neural network controller design for complex damage to a blended wing Unmanned Aerial Vehicle(UAV): partial loss of main wing and vertical tail. Longitudinal/lateral axis instability and the change of flight dynamics is investigated via numerical simulation. Based on this, neural network based adaptive controller combined with two types of feedback linearization are designed in order to compensate for the complex damage. Performance of two kinds of dynamic inversion controllers is analyzed against complex damage. According to the structure of the dynamic inversion controller, the performance difference is confirmed in normal situation and under damaged situation. Numerical simulation verifies that the instability from the complex damage of the UAV can be stabilized via the proposed adaptive controller.