• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.766-773
• /
• 2016

This paper proposes an aircraft-installed compact offset-parabolic-reflector antenna for the spinning direction-finding applications. The feeder of the reflector antenna is a LPDA antenna that has the ultra-wideband characteristics and the $45^{\circ}$ slant linear polarization. The reflector is designed to be slanted by $5^{\circ}$ in the elevation and to be small in size on the basis of the reference parabolic shape for the purpose of the high gain and mounting on the underside of aircraft fuselage. Over the ultra-wideband 20:1 bandwidth from S to Ka band, the measured average gain of the proposed antenna is 27.97 dBi, and the average half-power beam width is $4.55^{\circ}$ in the azimuth and $4.3^{\circ}$ in the elevation which is the pencil-beam radiation pattern. All the measured data are similar to the simulation results. The designed compact offset-parabolic-reflector antenna that is installed in the limited area has the ultra-wideband and high-gain characteristics. We expect that the newly designed antenna can be applied to the spinning direction-finding antenna system installed in an aircraft.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.903-910
• /
• 2020

This paper introduces a simulator to assess the impacts of the wind and the airframe vibration on the performance of the Active Electronically Scanned Array (AESA) radar mounted in an aircraft. The AESA radar is mounted on the nose cone of an aircraft, and vibration occurs due to the drag force. This vibration affects the behavior of the AESA radar and can cause phase errors in signal. The simulator adopts the geometric model for nose cone, the mathematical models on the rigid-body dynamics of the aircraft, the average/turbulent winds, and the mode/ambient vibrations to compute the position and the attitude of the radar accurately. Numerical studies reflecting a set of test scenarios were conducted to demonstrate the effectiveness of the developed simulator.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.253-259
• /
• 2007

Standard design and suitable environmental test method should be applied to increase the reliability of UAV flight control systems. UAV flight control systems under development domestically have enough capabilities for complicated missions. However, most low cost systems are not designed with concepts of compatibility, adaptability, and environmental compliance. This paper explains ATR(Air Transport Rack) standard that is widely used on aircraft. The paper presents a design uses commercial off-the-shelf parts. The paper also presents various environmental standards for airborne equipments, including U.S. military specifications. The developed FCS was tested under these specifications. The paper shows the test procedures and results.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.178-184
• /
• 2024

The radar installed on an aircraft has various operating modes depending on tactical purposes, allowing for the configuration of search areas according to each mode's operational objectives. active electronically scanned array (AESA) radar emits search beams sequentially according to a predefined search beam grid within the designated search area specified by the pilot to detect targets within it. It is crucial that the radar can stably search the area designated by the pilot for target detection, even as the aircraft's attitude changes. This paper focuses on stabilizing the search pattern in the air-to-air operational mode of aircraft-mounted radar to ensure stable target detection during roll and pitch maneuvers of the aircraft. The paper demonstrates its performance by simulating aircraft maneuvers and targets in a system integration laboratory (SIL) test environment.

• Current Industrial and Technological Trends in Aerospace
• /
• v.4 no.2
• /
• pp.55-67
• /
• 2006

20세기에 탄생한 동력비행기는 인간의 이동능력을 비약적으로 향상시켰다. 인류의 미개척지였던 항공분야의 발전은 지속적인 기술개발을 통해 더 빨리, 더 멀리, 더 높이 향하기 위해서 계속 나아가고 있다. 이러한와중에 최근에 괄목할 만한 성장을 이룬 컴퓨터와 소프트웨어 산업의 발전은 비행임무에 따라 위험성이 높거나, 사람이 하기 힘든 반복적이고 지루한 비행을 대신하기위한 로봇 비행체 즉, 무인항공기의 개발을 가능하게 하였다. 무인항공기의 탄생 초기에는 조종사의 희생을 줄이기 위해 군사 분야에서 주로 사용되었으나, 산림감시나 해안정찰, 기상관측, 재난관측, 조난자 수색 등 민수분야의 임무로 점차 활동영역이 넓혀지고 있다. 현재 무인항공기에 탑재된 인공지능의 수준은 안정된 비행이 가능하도록 하는 자동조종(autopilot)과 주어진 비행경로를 추종하기위한 항법유도(Navigation & Guidance)정도이며, 비행 중 발생하는 비상상황에 대처하기 위한 의사판단은 지상의 조종자에 의해 결정된다. 앞으로는 계획되지 않은 상황을 맞이했을 때 무인기 스스로 판단하여 경로를 변경하고, 동시에 여러 무인기들과 협력하여 임무를 수행함으로써 임무효율을 높이는 방향으로 인공지능의 수준이 향상될 것이다. 본 논문에서는 최근의 무인항공기 개발추세와 이들 무인기에 고려되고 있는 제어기에 대해 살펴보고, 향후 무인항공기에 적용될 자율비행 알고리듬과 제어기 시스템의 개발동향에 대해 고찰하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.2
• /
• pp.11-20
• /
• 2016

We show feasibility of deployment of global wireless communications network with airliners, especially for disastrous vast areas by earthquakes or a tsunami as well as unwired regions of the global to extend Internet access. In this study, we collect flight information data related to civil aircraft passing through, especially South Korea, Japan, United States, and Europe. From the collected data, we obtain hourly available service area ratio and cumulative average service area when airliners are equipped with a long range wireless communication gadget. Then, we reveal that it is possible to deploy global wireless communications network using airliner ad hoc network.

• Defense and Technology
• /
• no.12 s.250
• /
• pp.46-53
• /
• 1999

미래 전술기의 생존성을 향상시키기 위한 기술적 수단으로 효과측면에서 충분히 고려할만한 가치가 있다고 생각되는 것을 다음과 같은 6개 항목으로 제한된다. (1) 침투비행시의 비행속도를 증가시킨다. (2) 침투비행시의 비행고도를 낮게 유지한다. (3)탑재무장에 큰 스탠드 오프 특성을 부여한다. (4) 탑재무장의 유도방식을 Fire and Forget 특성을 갖게 한다. (5) 기체에 스텔스 기술을 적극 활용한다. (6) EMC 능력을 더욱 강화시킨다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.253-260
• /
• 2016

This paper proposes a planar Log-Periodic Dipole Array(LPDA) antenna with light-weight supporting structure for installing on an aircraft. The proposed antenna is designed by applying a planar skeleton supporting structure that has light-weight for an aircraft and is capable of withstanding structural vibration. The material of the planar skeleton supporting structure is a Polyether ether ketone(Peek) which has excellent characteristics on strength and temperature. The proposed antenna is fabricated by attaching the radiating elements of the LPDA on both sides of the supporting structure. The changed input impedance due to the dielectric material of the supporting structure was compensated for by controlling the distance and length of several radiating elements. The 10-dB return loss bandwidths of the designed planar LPDA antenna with light-weight supporting structure are obtained as 0.4~3.1 GHz(7.3:1) in the simulation and 0.41~3.5 GHz(8.2:1) in the measurement. The average gains in 0.5~3 GHz band are 6.77 dBi in the simulation and 6.55 dBi in the measurement. Therefore, we confirm that the designed antenna is appropriate to be installed on an aircraft due to its light-weight structure and wideband directional radiation characteristics.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.105-115
• /
• 2010

This technical paper describes and summarizes the flight test results for the longitudinal and lateal-directional dynamic stability characteristics. The target aircraft is the 4-seat carnard type aircraft, FireFly, which has been developed by KARI. Airborne sensors and real-time telemetry system are constructed to obtain the flight test data. The dynamic stability characteristics should be analyzed and tested by estimaitng the aerodynamic parameters in the dymaic equations of motion. The maximum likelihood estimation technique has been applied to the flight data from chirp, 3211, and doublet control inputs.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.3-54
• /
• 2013

Nowadays, major advanced countries in aviation technology are putting their effort to develop commercial and civil Unmanned Aircraft System(UAS) due to its highly promising market demand in the future. The market scale of commercial and civil UAS is expected to increase up to approximately 8.8 billon U.S. dollars by the year 2020. The usage of commercial and civil UAS covers various areas such as remote sensing, relaying communications, pollution monitoring, fire detection, aerial reconnaissance and photography, coastline monitoring, traffic monitoring and control, disaster control, search and rescue, etc. With the introduction of UAS, changes need to be made on current Air Traffic Management Systems which are focused mainly manned aircrafts to support the operation of UAS. Accordingly, the legislation for the UAS operation should be followed. Currently, ICAO's Unmanned Aircraft System Study Group(UASSG) is leading the standardization process of legislation for UAS operation internationally. However, some advanced countries such as United States, United Kingdom, Australia have adopted its own legislation. Among these countries, United States is most forth going with President Obama signing a bill to integrate UAS into U.S. national airspace by 2015. In case of Korea, legislation for the unmanned aircraft system is just in the beginning stage. There are no regulations regarding the operation of unmanned aircraft in Korea's domestic aviation law except some clauses regarding definition and permission of the unmanned aircraft flight. However, the unmanned aircrafts are currently being used in military and under development for commercial use. In addition, the Ministry of Land, Infrastructure and Transport has a ambitious plan to develop commercial and civil UAS as Korea's most competitive area in aircraft production and export. Thus, Korea is in need of the legislation for the UAS operation domestically. In this regards, I personally think that Korea's domestic legislation for UAS operation will be enacted focusing on following 12 areas : (1)use of airspace, (2)licenses of personnel, (3)certification of airworthiness, (4)definition, (5)classification, (6)equipments and documents, (7)communication, (8)rules of air, (9)training, (10)security, (11)insurance, (12)others. Im parallel with enacting domestic legislation, korea should contribute to the development of international standards for UAS operation by actively participating ICAO's UASSG.