Abstract
Standard design and suitable environmental test method should be applied to increase the reliability of UAV flight control systems. UAV flight control systems under development domestically have enough capabilities for complicated missions. However, most low cost systems are not designed with concepts of compatibility, adaptability, and environmental compliance. This paper explains ATR(Air Transport Rack) standard that is widely used on aircraft. The paper presents a design uses commercial off-the-shelf parts. The paper also presents various environmental standards for airborne equipments, including U.S. military specifications. The developed FCS was tested under these specifications. The paper shows the test procedures and results.
다양하게 개발되고 있는 무인항공기 탑재 시스템의 신뢰도 확보를 위해 규격화된 설계와 적절한 환경시험 방법이 적용되어야 한다. 국내에서 개발되고 있는 무인항공기용 탑재 시스템은 다양한 기능을 구현할 수 있는 충분한 능력을 갖고 있다. 하지만, 대부분의 시스템은 상호 호환성이 없고, 환경에 대한 적응성도 보장되어 있지 않다. 본 논문에서는 유인항공기에 사용되는 ATR(Air Transport Rack) 규격을 설명하고 이를 바탕으로 무인항공기에 적용 가능한 탑재시스템의 ATR 규격을 제시하였다. 특히 COTS(Commercial off-the-shelf) 부품을 사용한 설계 방법을 제시하였다. 시스템이 전자/기계적 환경과 기상 환경에 적응 가능하도록 하기 위해 다양한 설계 방법을 적용하였다. 미국의 군사표준서(Military Standard)를 참고하여 실험실 단위에서 수행할 수 있는 시험 방법을 계획하고, 기준을 정하여 시험을 수행하였다.