• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.282-288
• /
• 2015

A new energetic thermoplastic elastomer based on the azidated polybutadiene(Az-PBD)/ethylene vinyl acetate copolymer (EVA) blends was prepared, and structure and properties of the blends were invetigated by SEM, DSC, DMA, tensile testing and combustion test. The Az-PBD was synthesized via a two-step process involving the addition reaction of commercially available 1,2-PBD with $Br_2$ and subsequent nucleophilic substitution reaction of the brominated PBD with $NaN_3$. EVA/Az-PBD with 90/10, 80/20, 70/30 (wt/wt) was prepared by a solution blending. SEM, DSC, and DMA results revealed that the blends are partially compatible and Az-PBD is dispersed in continuous EVA matrix. Tensile test showed that modulus and tension set increased while elongation-at-break of the blends decreased with increasing Az-PBD content in the blends, but all the blends showed a elongation at break as high as 700% and a tension set of less than 5%, indicating that the blends are typically elastomeric. Combustion test showed that, with increasing Az-PBD content in the blend, higher energy can be released.

• Journal of Adhesion and Interface
• /
• v.18 no.2
• /
• pp.75-81
• /
• 2017

In this study, we synthesized mesoporous carbon (Carbonized Ni-FDU-15) containing nanoporous structures and magnetic nanoparticles. Carbonized Ni-FDU-15 was synthesized via evaporation-induced self-assembly (EISA) and direct carbonization by using a triblock copolymer (F127) as a structure-directing agent, a resol precursor as a carbon-pore wall forming material, and nickel (II) nitrate as a metal ion source. The mesoporous carbon has a well-ordered two-dimensional hexagonal structure. Meanwhile, nickel (Ni) metal and nickel oxide (NiO) were produced in the magnetic nanoparticles in the pore wall. The size of the nanoparticles was about 37 nm. The surface area, pore size and pore volume of Carbonized Ni-FDU-15 were $558m^2g^{-1}$, $22.5{\AA}$ and $0.5cm^3g^{-1}$, respectively. Carbonized Ni-FDU-15 was found to move in the direction of magnetic force when magnetic force was externally applied. The magnetic nanoparticle-bearing mesoporous carbons are expected to have high applicability in a wide variety of applications such as adsorption/separation, magnetic storage media, ferrofluid, magnetic resonance imaging (MRI) and drug targeting, etc.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.70-81
• /
• 1989

Reverse phase liquid chromatographic elution behaviors of salicylic acid and its derivatives were studied with classical and modern high-performance liquid chromatography(HPLC) using Amberlite XAD-4 and XAD-7 resin packed columns. Capacity factors(k') were determined in the comparatively high concentration(from 0. 010F to 0. 150F) of ferric nitrate-50% methanol solution to elucidate the elution behaviors with classical method. On the other hand, k's were measured in the various concentrations of methanol and ferric nitrate(from $2.5{\times}10^{-4}F\;to\;1.0{\times}10^{-3}F$) solution of pH 2. 25 and 293K with HPLC to explain the elution mechanism of them, and to find their optimum separation condition. As a result, it was found that log k's of salicylic acid and its derivatives were decreased with increasing the concentration of ferric ion, and the decreasing slopes of the compounds on the increasing ferric ion concentrations were related with each stability constant of ferric salicylates. Some isomers of derivatives of salicylic acid could be separated in the optimum condition.

• Journal of the Korean Chemical Society
• /
• v.50 no.2
• /
• pp.123-128
• /
• 2006

Behcet's disease (BD) is a systemic vasculitis characterized by recurrent oral and genital ulcers, and ocular inflammation, and which may involve the joints, skin, central nervous system and gastrointestinal tract. Although the exact pathogenesis for BD is not completely understood, it has been suggested that the disease is triggered in genetically susceptible individuals by environmental factors, such as microbial agents. It is noted that multiple genes, including MHC (major histocompatibility complex) and non-MHC genes, are implicated in the pathogenesis of BD. This study tries to determine whether IL-6 gene polymorphisms are associated with susceptibility to Behcet's disease in Koreans. Gene polymorphisms were typed by VNTR (variable number of tandem repeat), RFLP (restriction fragment length polymorphism), DHPLC (denaturing high performance liquid chromatography).There were no evidences for genetic association conferred by the IL-6prom polymorphism. However, significant differences in the IL-6vntr genotype and allele frequencies were found between patients with BD and controls. The IL-6vntr*C allele appeared to be an additional susceptibility gene to Korean BD. Further studies in other populations and gene are required to confirm these results.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.9-16
• /
• 2003

Ipriflavone (IP) stimulates proliferation and differentiation of osteoblast and also enhances calcitonin secretion in the presence of estrogen. Poly(lactide-co-glycolide) (PLCA) due to its controllable biodegradability and relatively good biocompatibility is one of the most significant candidates for the study of drug controlled release system. In this study, IP-loaded PLGA microspheres (MSs) was prepared by using conventional O/W solvent evaporation method. The size of MSs was in the range of 5~200 $mu extrm{m}$. The morphology of MSs was characterized by SEM. And, in vitro release amounts of IP were analyzed by HPLC. The highest encapsulation efficiency were obtained by using gelatin and polyvinyl alcohol (PVA) as emulsifiers. The morphology, size distribution, and in vitro release pattern of MSs were changed by several preparation parameters such as molecular weights (8, 20, 33 and 90 kg/mol), polymer concentrations (2.5, 5, 10 and 20%), emulsifier types (PVA, gelatin and Tween 80), initial drug loading amount (5, 10, 20 and 30%) and stirring speed (250, 500 and 1000 rpm). The release of IP in vitro was more prolonged over 30 days, with close to zero-order pattern by controlling the preparation parameters. The physicochemical properties of IP-loaded PLGA MSs were investigated by XRD and DSC.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.169-176
• /
• 2012

Based on our experience in developing resistive humidity sensor, interdigital gold electrodes with different fingers and gaps have been fabricated on a glass epoxy (GE) substrate using screen printing techniques. The basic structure of the electrode consisted of a 3-, 4- and 5-fingers with gaps of 310 and 460 ${\mu}m$. Gold electrode/GE was prepared by first printing silver nanopaste, followed by consecutive electroless plating of Cu, Ni and then Au. Copolymer of [2-(methacryloyloxy)ethyl] dimethyl benzyl ammonium chloride (MDBAC) and methyl methacrylate (MMA) was used as a humidity-sensing polyelectrolyte, which was fabricated by a screen printing method on the Au electrode/GE substrate. The flexible humidity sensor showed acceptable linearity between logarithmic impedance and relative humidity in the range of 20-95%RH, low hysteresis of 1.5%RH, good response and recovery time of 75 sec at 1 V, 1 kHz, and $25^{\circ}C$. Electrode construction had a significant influence on the humidity-sensing characteristics of polymeric humidity sensors. The activation energy between electrode and ion conducting polyelectrolyte plays an important role in explaining the differences of humidity sensing characteristics such as temperature dependence, sensitivity, linearity and hysteresis.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.276-283
• /
• 2008

Kind of monomer(MMA, EA, BA, St)and the monomer ratio(80/20 to 20/80) where changed in the preparation of the core shell binder, and property was improved the plasma processing. Each material changed by plasma treatment time($1{\sim}10\;s$) to change to measure the tensile strength, contact angle and adhesion peel strength for the core shell binder optimal conditions for handling the output of the surface treatment. The type of polymerization and composition of the binder is a regardless initiator of APS, the reaction temperature of $85^{\circ}C$ to 0.3 wt% of the surfactant used to indicate when the conversion rate was the highest, core shell composite particle binder got two glass temperature curves. Core shell binder after the plasma processing contact angle change is the PEA/PSt 38 percent of cases within five seconds to indicate slight decrease was a decline rapidly if not handled $0^{\circ}$ to reach. Tensile strength PSt/PMMA varies $46.71{\sim}46.27\;kg_f$/2.5 cm and adhesion strength PEA/PMMA varies $7.89{\sim}14.44\;kg_f$/2.5 cm increases. Overall, adhesion strength of core shell composite particle is in the order of order PEA>PBA>PSt for shell monomer MMA.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.81-90
• /
• 2010

We introduce a novel and versatile approach for preparing self-assembled nanoporous multilayered films with antireflective properties. Protonated polystyrene-block-poly (4-vinylpyrine) (PS-b-P4VP) and anionic polystyrene-block-poly (acrylic acid) (PS-b-PAA) block copolymer micelles (BCM) were used as building blocks for the layer-by-layer assembly of BCM multilayer films. BCM film growth is governed by electrostatic and hydrogen-bonding interactions between the oppositely BCMs. Both film porosity and film thickness are dependent upon the charge density of the micelles, with the porosity of the film controlled by the solution pH and the molecular weight (Mw) of the constituents. PS7K-b-P4VP28K/PS2K-b-PAA8K films prepared at pH 4 (for PS7K-b-P4VP28K) and pH 6 (for PS2K-b-PAA8K) are highly nanoporous and antireflective. In contrast, PS7K-b-P4VP28K/PS2K-b-PAA8K films assembled at pH 4/4 show a relatively dense surface morphology due to the decreased charge density of PS2K-b-PAA8K. Films formed from BCMs with increased PS block and decreased hydrophilic block (P4VP or PAA) size (e.g., PS36K-b-P4VP12K/PS16K-b-PAA4K at pH 4/4) were also nanoporous. Furthermore, we demonstrate that the nanostructured electrochemical sensors based on patterning methods show the electrochemical activities. Anionic poly(styrene sulfonate) (PSS) layers were selectively and uniformly deposited onto the catalase (CAT)-coated surface using the micro-contact printing method. The pH-induced charge reversal of catalase can provide the selective deposition of consecutive PE multilayers onto patterned PSS layers by causing the electrostatic repulsion between next PE layer and catalase. Based on this patterning method, the hybrid patterned multilayers composed of platinum nanoparticles (PtNP) and catalase were prepared and then their electrochemical properties were investigated from sensing $H_2O_2$ and NO gas. This study was based on the papers reported by our group. (J. Am. Chem. Soc. 128, 9935 (2006); Adv. Mater. 19, 4364 (2007); Electro. Mater. Lett. 3, 163 (2007)).

• Journal of Life Science
• /
• v.17 no.10
• /
• pp.1426-1433
• /
• 2007

To investigate the antibiotic resistant patterns of the bacteria producing ESBL, we isolated one organism of Klebsiella pneumoniae from a clinical laboratory in Busan. The organism that produces ESBL gene was detected by double disk synergy test and the presence of three ESBL genes (TEM-1, SHV-12, CTX-M-15) was confirmed by polymerase chain reaction and DNA sequencing analysis. To analyse the characteristics of three ESBL genes, we performed transconjugation, transformation and cloning experiment with the organism. The MIC of Klebsiella pneumoniae was revealed that ceftazidime, cefotaxime and ceftriaxone were $256\;{\mu}g/ml,\;128\;{\mu}g/ml\;and\;128\;{\mu}g/ml$ respectively. The MIC of conjugant (E. coli $RG176^{Na(r)}$) af was revealed that ceftazidime, cefotaxime and ceftriaxone were $256\;{\mu}g/ml,\;64\;{\mu}g/ml\;and\;128\;{\mu}g/ml$ respectively. The MIC of transformant (E. cofi $DH5{\alpha}$) was revealed that ceftazidime, cefotaxime and ceftriaxone were $128\;{\mu}g/ml,\;32\;{\mu}g/ml,\;and\;32\;{\mu}g/ml$ respectively, The MIC of cloned organism of SHV-12 gene (E. coli $DH5{\alpha}$) was revealed that ceftazidime, cefotaxime and ceftriaxone were $128\;{\mu}g/ml,\;8\;{\mu}g/ml,\;and\;32\;{\mu}g/ml$ respectively. The results indicated that MIC of conjugant was higher than MIC of transformant and also SHV-12 gene were not resistant against cefotaxime antibiotic.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.1
• /
• pp.17-26
• /
• 1993

Mineralogical characteristics of tosudite from the Sungsan and Bubson mines were studied and correlated using X-ray diffraction analysis, chemical analysis and electron microscopy. Tosudite occurs as an alteration product of Cretaceous volcanoclastic rocks in both mines. It is associated with microcrystalline quartz, dickite, illite/smectite or mica/smectite mixed-layer mineral. It forms cryptocrystalline aggregates with flaky habit. XRD analysis suggests that tosudite is an 1:1regularly interstratified dioctahedral smetite/dioctahedral chlorite. Bubsoo tosudite has more(00ℓ ) reflections and more periodice stacking sequence than Syngsan tosudite. Chemical analysis shows that tosudite is a Li-bearing aluminous 1:1 regularly interstrattified mineral composed of K-bedellite and donbassite. Cookeite component may be present in the chlorite layer. Bubsoo tosudite is more Al in tetrahedral site and Ca in interlayer, but less Al in octahedral site than Sugsan tosudite. Tosudite may be formed as the intermediate alteration products, forming after muscovite and before illite/smectite or mica/s$^{\circ}C$mectite, with the range from 100 $^{\circ}C$ to 360 ~ 480 $^{\circ}C$. The hydrothermal solution forming tosudite may be acidic solution with high activities of Si and Al.