• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.697-705
• /
• 1997

The conventional preflex beams are designed by the method of paritial prestressing and allow the tensile stresses at the lower concrete of beams. As a consequence, most of preflex beams experience the tensile cracks under the service loads. This study was conducted to develop the most effective preflex beams, which do not allow tensile stress under the service load, by introducing additional prestressing called 'represtressing' at the lower concrete of beams. The objective of the study was accomplished by developing a computer analysis and design program and conducting experiments. Using the developed computer program, standard sections of the represtressed preflex beams were determined by computer modeling. In the experiment, two actual size of represtressed beams were tested under the imitated service loads. The results of test have shown that the performance of the represtressed preflex beams is generally excellent. A remarkable improvement was made in the design of preflex composite beams. Since the represtressed preflex beams(RPF) do not experience the tensile cracks under the service loads, the use of this beam for the bridge structures will lead to easy bridge maintenance and management. Furthermore, due to the low beam depth, high clearance and economical design can be realized in the bridge design using RPF.

• The KIPS Transactions:PartA
• /
• v.18A no.1
• /
• pp.1-10
• /
• 2011

Physical modeling has been widely used for sound synthesis since it synthesizes high quality sound which is similar to real-sound for musical instruments. However, physical modeling requires a lot of parameters to synthesize a large number of sounds simultaneously for the musical instrument, preventing its real-time processing. To solve this problem, this paper proposes a single instruction, multiple data (SIMD) based multi-core processor that supports real-time processing of sound synthesis of gayageum which is a representative Korean traditional musical instrument. The proposed SIMD-base multi-core processor consists of 12 processing elements (PE) to control 12 strings of gayageum in which each PE supports modeling of the corresponding string. The proposed SIMD-based multi-core processor can generate synthesized sounds of 12 strings simultaneously after receiving excitation signals and parameters of each string as an input. Experimental results using a sampling reate 44.1 kHz and 16 bits quantization show that synthesis sound using the proposed multi-core processor was very similar to the original sound. In addition, the proposed multi-core processor outperforms commercial processors(TI's TMS320C6416, ARM926EJ-S, ARM1020E) in terms of execution time ($5.6{\sim}11.4{\times}$ better) and energy efficiency (about $553{\sim}1,424{\times}$ better).

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.3
• /
• pp.191-199
• /
• 2010

Physical modeling is a synthesis method of high quality sound which is similar to real sound for musical instruments. However, since physical modeling requires a lot of parameters to synthesize sound of a musical instrument, it prevents real-time processing for the musical instrument which supports a large number of sounds simultaneously. To solve this problem, this paper proposes a single instruction multiple data (SIMD) parallel processor that supports real-time processing of sound synthesis of guitar, a representative plucked string musical instrument. To control six strings of guitar, we used a SIMD parallel processor which consists of six processing elements (PEs). Each PE supports modeling of the corresponding string. The proposed SIMD processor can generate synthesized sounds of six strings simultaneously when a parallel synthesis algorithm receives excitation signals and parameters of each string as an input. Experimental results using a sampling rate 44.1 kHz and 16 bits quantization indicate that synthesis sounds using the proposed parallel processor were very similar to original sound. In addition, the proposed parallel processor outperforms commercial TI's TMS320C6416 in terms of execution time (8.9x better) and energy efficiency (39.8x better).

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.102-107
• /
• 2006

In this paper, we propose a method of a sound synthesis of Korean plucked string instrument, gayageum, by physical modeling which use impulse responses of body and Anjok. Gayageum consists of three kinds of systems: string, body, and Anjok. These are a serial combination of linear time invariant systems. String can be modeled by digital delay line. Body and Anjok can be estimated by their impulse responses. We found three resonance frequencies in the body impulse response, and implemented resonator as body. Anjok was implemented as high pass filter in fundamental frequency band of gayageum. RMSEs of synthesized sounds are distributed from 0.01 to 0.03. It was difficult to distinguish the resulting synthesized sounds from the originals sound by ear.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.23-30
• /
• 2012

The temperature development of a structural element is dependent on section factor, which is estimated as a ratio of the fire-exposed perimeter to the cross-section area. Hence, with the higher section factor, the faster temperature development of the section os observed. Composite beam member, partially embedded asymmetry H beam, has a good fire resistance to the cross-section. The study was intended to conduct with change with section factor. The experimental result of section type which the Slim Beam Floor is bottom flange reinforced method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.399-399
• /
• 2012

최근 그래핀 연구와 더불어 2차원 구조의 나노소재에 대한 관심이 급증하면서 육각형의 질화붕소(hexagonal boron nitride; h-BN) 나노시트(nanosheet)[1]나 붕소 탄화질화물(boron caronitride;BCN) 나노시트[2, 3]와 같은 2차원 구조체에 대한 연구가 활발히 진행되고 있다. 그 중 BCN은 반금속(semimetal)인 흑연(graphite)과 절연체인 h-BN이 결합된 나노시트로 원소의 구성 비율에 따라 전기적 특성을 제어할 수 있다는 장점이 있다. 따라서 다양한 나노소자로의 응용을 위한 연구가 활발히 진행되고 있다. 본 연구에서는 열 화학기상증착법(thermal chemical vapor deposition)을 이용하여 폴리스틸렌(polystyrene)과 보레인 암모니아(borane ammonia)를 사용하여 BCN 나노시트를 합성하였다. 합성된 BCN 나노시트의 구조적 특징과 화학적 조성 및 결합 상태를 주사전자현미경(scanning electron microscopy), 투과전자현미경(transmission electron microscopy), X-선 광전자 분광법(X-ray photoelectron spectroscopy), 라만 분광법(Raman spectroscopy)을 통해 조사하였고, 이온성 용액법 (ionic liquid)[4]을 이용하여 전계효과 특성을 측정하였다.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.69-74
• /
• 2006

가상환경의 실시간 운동감을 제공하는 차량 시뮬레이터 기술에 있어, 그 현실성 제고를 위한 다양한 연구가 수행되어 왔으며, 최근에는 실제 대상의 운동감을 기록하고 이를 재생하는, 데이터기반 운동감 생성 시스템이 개발되었다. 이 방법은 실제 운동감을 제공하므로, 현실성 확보가 용이하나, 사용자와의 상호 작용이 없는 단순한 가상 컨텐츠의 제공 단계에 머물고 있다. 본 연구에서는, 컴퓨터 그래픽스 분야에서 활발히 연구되고 있는, 모션 캡쳐 데이터의 가공 및 합성 기술을 차량 시뮬레이터 구동 과정에 도입하여, 제어가 가능한, 실 데이터 기반 운동감을 생성하는, 새로운 방법을 제안하고자 한다. 이 방법은, 실제 차량의 운동데이터를 획득하고, 적절한 형태의 데이터 구조(운동감 조각)로 변환하여 데이터베이스에 저장하며, 실시간 시뮬레이션 시, 최적의 운동감 조각을 검색하고 합성하여 운동감 스트림을 제공하는 방법으로서, 현재의 시뮬레이션 상태 및 사용자의 요구 사항을 매개변수화 하여, 현실과 가장 가까운 운동감 생성방법을 제공한다. 또한, 차량 운동감 생성 시스템의 개발 및 모션 베이스 구동 실험을 통해, 제안한 방법에 의한 운동감의 현실성 제고 방안에 대해 소개하고자 한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.75-81
• /
• 2011

Hydroxyapatite (HAP) crystals with hexagonal structure have been successfully synthesized by using EDTA(ethylene diamine tetraacetic acid) as chelate under hydrothermal condition. The as-prepared HAp powders were characterized by XRD and SEM. The XRD result indicated that the products were preferentially oriented along c-axis. The SEM photographs showed that the morphology of the HAp crystals was well controlled by the reaction parameters such as temperature, pH value, and the molar ratio of EDTA/Ca.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.562-565
• /
• 2000

pH- and thermo-sensitive hydrogels containing maleilated chitosan(MC) and N-isopropylacrylamide(NIPAAm) were prepared and characterized for their swelling behavior, biodegradability and drug release profiles. The hydrogels exhibited a typical pH-sensitivity due to the carboxylic acid groups of maleilated chitosan. The change of ratio of NIPAAm to MC in weight did not affect on either lower critical solution temperature(LCST) or EWC significantly. The pH sensitivity of the hydrogel, however, depended on the amounts of carboxylic acid groups of MC. MC was degradable up to 80% weight reduction in 2 hours. The in vitro drug relase profiles were established both in buffer solution pH 1.4 and pH 7.4. Only a negligible amount of indomethacin was released at pH 1.4 in 6 hours, while at pH 7.4 more than 90% of the total drug in the hydrogel was gradually released over ca. 5 hours.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.52-57
• /
• 1999

It is very important to design of QAM modulator of high spectral efficiency for high speed data transmission. In this paper, typical 16-QAM modulator is designed by modification design of DDFS(direct digital frequency synthesizer). DDFS generates sinusoidal waveform digitally to the frequency setting word. Phase modulation is accuratly made by control of a generated phase increment value and amplitude modulation is accomplished in the D/A converter output by control of amplitude level. For the suppression of harmonics and glitch, dual-structured DDFS is studied to improve the spurious characteristics. P-Spice is used for design and simulation in mixed mode. Also we can get the satisfactory results of designed 16-QAM modulator from the constellation output.