• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.564-572
• /
• 2012

A terpolymer of vinylbenzyl chloride-co-ethyl methacrylate-co-styrene (VBC-EMA-St) was prepared for membrane capacitive deionization (MCDI) by radical polymerization and amination reaction of various amination times. Nonfluoro aminated VBC-EMA-St anion-exchange membranes were characterized by Fourier transform infrared (FTIR) spectrometry. Molecular weight, polydispersity and thermal stability were obtained by gel permeation chromatography (GPC) and thermogravimetric analysis (TGA). The basic properties such as water uptake, ion exchange capacity, electrical resistance and CDI charge-discharge current were measured. The optimal values of ion exchange capacity, water uptake, electrical resistance and molecular weight of synthesized anion-exchange membrane were 1.69 meq/g, 23.7%, 1.61 ${\Omega}{\cdot}cm$ and $3.4{\times}10^4$ g/mol, respectively. As compared with conventional membrane, the pattern of cyclic charge-discharge current of synthesized anion-exchange membrane indicated efficient electrosorption and desorption.

• Korean Journal of Microbiology
• /
• v.33 no.3
• /
• pp.181-186
• /
• 1997

Sugar ester compounds were synthesized in organic solvent using lipase. Anhydrous pyridinc was selected as ;I solvent because of reasonable solubility of sugar. The synthesis of sugar ester compound was catalyzed by Pseudomonas sp. lipase in the reaction system containing anhydrous pyridine as .i solvent and vinyl butylate as an acyl donor. The analysis of the reaction product by TLC and GC showed thilt monobutyryl and dibutyryl fructose esters were synthesized by transesterification reaction between fructose and vinyl butyrate. Optimal conditions for the transesterification reaction were as follows: the ratio of fructoselvinyl butylate, I : lO(M : M): reaction temperature, 40^{\circ}C.$, velocity of shaking, 150 rprn: concentration of enzyme, 10 mglml. The longer the reaction period, the higher the conversion rate, and the conversion rate reached up to 90% after about 10 days of reaction. Monobutyryl fructose was mainly synthesized in the early stage of reaction, but the amount of dibutyryl fructose increased gradually as the rcdction progressed. When a small amount of water was added to the reaction mixture (micro-water system), the reaction rate decreased, while that of rnonobutyr~l fructosc increased. Only monobutyryl fructose was obtained when 1% water was added to the reaction mixture.

• Elastomers and Composites
• /
• v.47 no.3
• /
• pp.216-222
• /
• 2012

In this study, p-acryloyloxybenzoic acid(ABA) was synthesized with p-hydroxybenzoic acid(HBA) and acryloyl chloride(AC). The synthesized ABA monomer was grafted onto ethylene-propylene-diene rubber(EPDM) in toluene using benzoyl peroxide(BPO) as an initiator. The structures of ABA and EPDM-g-ABA were characterized by FT-IR, $^1H$-NMR, and $^{13}C$-NMR spectrometer. The graft ratio of EPDM-g-ABA increased with increasing the concentration of the initiator and the monomer. Mechanical properties such as tensile strength and compression set of the EPDM-g-ABA were improved with increasing the graft ratio. The $T_g$ and initial decomposition temperature were also increased with increasing the graft ratio.

• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.335-341
• /
• 1984

Acetals of ${\alpha},{\beta}$-unsaturated aldehydes reacted readily with aryl bromides in the presence of palladium catalyst and triethylamine to form aryl conjugated enals. Acrolein diethyl acetal and methacrolein diethyl acetal were reacted with phenyl bromides with substituents such as methyl and isopropyl groups at $100^{\circ}C$. The reaction products yields except the reaction of o-bromotoluene with methacrolein diethyl acetal. The products were identified by proton nuclear magnetic resonance and infrared spectroscopy. In the reverse combination of reactants to prepare aliphatic 2,4-dienals in good yield of above 50%, 3-bromopropenal dimethyl acetal and (E)-3-bromo-2-methylpropenal diethyl acetal were used as vinylic halide reactants and 1-alkenes and ethyl acrylate as olefin reactants.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.183.2-183.2
• /
• 2013

저항이 낮고 투과도가 일정한 투명전도막(TCF)의 내구성을 향상 및 유지 시키는 연구는 상업화에 가장 필요한 연구 분야이다. 그 중 탄소나노튜브(CNT)와 실버나노와이어(AgNW)를 섞어 만든 CNT-AgNW는 우수한 광투과성과 내화학성 및 균일한 전기 전도성을 갖고 있고 그 기반의 투명전도막은 기존의 ITO 및 CNT 박막보다 우수한 유연성을 갖기 때문에 차세대 플렉시블 디스플레이 소재로서 많은 관심을 모으고 있다. 본 연구는 PET를 이용한 CNT-AgNW로 제작된 투명전도막 위에 물성 및 두께 따른 하드오버 코팅을 통한 내구성 개선 및 유지를 연구하였다. 하드오버 코팅 물질로는 실로콘계 하이브리드 투명 하드코팅 소재를 기본으로 하고 용매 및 용질의 합성 온도를 제어하고 코팅막의 두께(Thin, Thick)를 조절을 통해 내구성 개선을 증진시키려 하였다. 연구결과 물성 향상에 가장 많은 영향을 끼치는 것은 CNT-AgNW 코팅층과 하드오버 코팅층과의 젖음성으로, 그 젖음성이 증가할수록 투과도 및 전기전도도가 향상되는 것을 관찰하였다. 분석 결과, 용매의 비점 및 비중, 용질의 합성 온도가 하드오버코팅 젖음성에 가장 많은 영향을 주는 것을 확인하였다. 또한 항온 항습($85^{\circ}C/85%$) 환경에서 240시간 이상 내구성 테스트 결과 하드오버코팅 물질 중 고온합성 및 고비점 용매를 이용하고 thick 조건이 Thin조건보다 투명전도성 평가 지수(${\sigma}DC/{\sigma}OP$)가 향상 되었다. 또한 Thin에서 면저항(${\Omega}/{\square}$) 변화율이 10% 이상을 보인 반면, Thick에서는 10% 이내의 변화율 유지를 확인하였다.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.62-68
• /
• 1994

Water-based magnetic fluids containing synthesized ultrafine magnetite were successfully prepared with $C_{18}$ fatty acid such as oleic acid, linoleic acid and stearic acid. Oleic acid was needed the amount of $3.0{\times}10^{-2}$ mol per 20 g magnetite to stabilize the magnetite $d\;=\;113\;\AA$ particles. From pH 8.0 to pH 11.0, stable aqueous-based fluids could be obtained. The aggregated powder after drying the water-based magnetic fluid was also successfully re-dispersed in dilute $NH_{4}OH$ solution and in kerosene. The pH levels of the magnetic fluid using oleic acid system could be predicted by the pH values obtained by calculation of therrrodynamic data.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.524-530
• /
• 2019

In this study, polyether polyol polypropylene glycol and isophorone diisocyanate (IPDI) were synthesized based on polyrupopylene mono methyl eher (PM) for the synthesis of water - soluble polyurethane for coating on leather skin layer. After synthesis of prepolymer, PM was added at $40^{\circ}C$ to 1M, 2M, 3M, and 4M to inhibit the viscosity rise, and neutralization reaction and chain extension reaction were carried out to prepare polyurethane samples. According to the measurement results of the tensile strength, elongation and adhesive strength of the prepared sample, the tensile strength was 2.109 kgf / mm2 for PM 1M, 1.721kgf / mm2 for 4M, elongation was 496% for PM 1M, 522% for 4M, adhesion was 1.114 kgf / cm for PM 1M and 0.99 kgf / cm for 4M.

• Journal of Energy Engineering
• /
• v.28 no.1
• /
• pp.17-21
• /
• 2019

Calcium sulfaluminate (CSA) was synthesized to improve the shrinkage of OPC. In this study, the setting time, the compressive strength and the length change ratio were confirmed by replacing the synthesized CSA with OPC by 10% and 13% by 16%. In the case of shrinkage-reducing type cement, formation of Ca-Al-$H_2$-based hydrate was activated. Therefore, the setting time was shortened. The compressive strength of the shrinkage - reducing type cement is comparable to that of OPC after 7 days' strength. However, shrinkage reducing type cement showed improved initial strength compared to OPC. The length change ratio was found to be improved by drying shrinkage from -0.075% to -0.047% on the 28th day.

• Smart Media Journal
• /
• v.10 no.4
• /
• pp.45-54
• /
• 2021

The skin is the body's first line of defense against external infection. When a skin disease strikes, the skin's protective role is compromised, necessitating quick diagnosis and treatment. Recently, as artificial intelligence has advanced, research for technical applications has been done in a variety of sectors, including dermatology, to reduce the rate of misdiagnosis and obtain quick treatment using artificial intelligence. Although previous studies have diagnosed skin diseases with low incidence, this paper proposes a method to classify common illnesses such as warts and corns using a convolutional neural network. The data set used consists of 3 classes and 2,515 images, but there is a problem of lack of training data and class imbalance. We analyzed the performance using a deep metric loss function and a cross-entropy loss function to train the model. When comparing that in terms of accuracy, recall, F1 score, and accuracy, the former performed better.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.200-200
• /
• 2021

하천은 용수공급, 관개, 친수활동, 산업활동 등 인간의 활동에 중요한 역할을 한다. 이에 따라 수질관리는 필수적이며 유기물, 중금속, 화학물질 등의 용존물질들은 수질문제에 직접적으로 영향을 미친다. 따라서 하천에서의 용존물질의 혼합 거동을 파악하기 위한 연구가 지난 수십년간 이루어지고 있다. 하천 흐름에 따른 오염물질의 이동 및 확산 거동을 예측하기 위하여 1차원 추적모형이 활용되는데, 그 중 하천저장대 모형(Transient Storage Model, TSM)은 자연하천의 복잡하고 불규칙한 수리·지형적인 특성을 단순하게 반영할 수 있다는 장점때문에 가장 많이 사용된다. 하지만 TSM은 매개변수에 대한 의존성과 불확도가 크며, TSM의 저장대에서의 농도분포에 대한 지수함수형태의 모델링이 하상간극수역(Hyporheic zone)에서의 저장대 특성을 반영하기에 구조적으로 부정확하다는 단점이 제기되고 있다. 최근 이러한 TSM의 단점을 보완하고 하천에서의 저장대 메커니즘을 보다 정확하게 구현하고자 체류시간분포(residence time distribution)를 이용한 확률론적 저장대 모델링 프레임워크가 등장하고 있다. 본 연구에서는 본류대와 저장대에서의 오염물질의 체류시간분포를 분리하여 해석하고 이를 전달함수(transfer function)를 이용한 합성곱으로 결합한 형태의 프레임워크를 적용하여 모델링하였다. 상기의 모형을 검증하기 위하여 2019년 감천의 4.85km 구간에서 추적자 실험을 실시하였다. 실험 당시 유량은 12.9 m³/s로 풍수기에 해당되며 평균 유속은 약 0.6 m/s로 측정되었다. 모형의 매개변수는 추적자 실험으로부터 최적화 기법을 통해 역모델링기법으로 결정하였다. 제안된 모형에 의한 모의 결과를 추적자 실험에서의 농도측정자료와 비교한 결과, 평균 0.988의 결정계수를 보여 매우 높은 정확도를 보이고 있음을 알 수 있었다. 저장대특성을 나타내는 농도곡선의 꼬리부에 대하여 같은 조건에서 1차원 이송-분산(ADE) 모형, TSM의 모의결과와도 비교한 결과 본 모형은 추적자 실험 농도측정 결과와 평균 0.195의 오차율을 보이며, 이는 ADE 모형과 TSM의 오차율인 14.03과 1.866에 비해 매우 정확한 것으로 나타났다.