• Membrane Journal
• /
• v.11 no.3
• /
• pp.124-132
• /
• 2001

Silica membranes were prepared on a porous ${\alpha}$-alumina tube with pore size of 150nm by sol-gel and chemical vapor deposition(CVD) method for hydrogen separation at high temperatures. Silica and ${\gamma}$-lumina membranes formed by the sol-gel method possessed a large amount of mesopores of a Knudsen diffusion regime. In order to improve the $H_2$ selectivity, silica was deposited in the sol-gel derived silica/${\gamma}$-alumina layer by thermal decomposition of tetraethyl orthosilicate(TEOS) at $600^{\circ}C$. The CVD with forced cross flow through the porous wall of the support was very effective in plugging mesopores that were left unplugged in the membranes. The CVD modified silica/alumina composite membrane completely rejected nitrogen permeation and thus showed a high $H_2$ selectivity by molecular sieve effect. the permeation of hydrogen was explained by activated diffusion and the activation energy was 9.52kJ/mol.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.152-164
• /
• 1995

$xPb(Fe_{1/2}Nb_{1/2})O_3 - (1 - x)Pb(Mg_{1/3}Nb_{2/3})O_3$ powders were synthesized by the molten salt synthesis method using the NaC!- KCI flux with 1 : 1 molar ratio, and their powders and dielectric properties were investigated. The synthesized powders showed less agglomerated shape with the average particle size of less than $2 \mu\textrm{m}$. The composition $x0.3Pb(Fe_{1/2}Nb_{1/2})O_3-0.7Pb(Mg_{1/3}Nb_{2/3})O_3$ could be sintered at $1000{\times}C$ and its dielectric constnat was over 11, 000.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.144.2-144.2
• /
• 2015

폴리머는 물건 포장, 산업재, 자동차 등 다양하게 사용되는 물질이다. 그런데 이러한 폴리머 제품을 제조하기 위해서는 일정 규모의 생산시설이 필요하다. 최근, 플라즈마를 이용한 여러 가지 폴리머 합성법들이 개발되면서 보다 편리하고 간편한 생산법이 제시되고 있으며, 다양한 분야에서 그 응용가능성을 타진하고 있다. 본 연구에서는 비교적 간단하게 플라즈마를 발생시킬 수 있는 대기압 AC 플라즈마 장치를 이용해 가장 많이 응용되고 있는 methyl methacrylate($C^5H^8O^2$)와 ethyl methacrylate($C^6H^{10}O^2$)를 폴리머로 합성했다. 이렇게 합성된 각 폴리머의 여러 가지 특성평가와 합성과정에서 부각된 여러 변수 및 합성 메커니즘에 대해서 살펴본다. 그리고 향후 플라즈마를 이용한 다양한 폴리머합성 가능성과 농업, 식품, 환경개선, 바이오 등의 응용 가능성에 대해서도 살펴볼 예정이다.

• Journal of Energy Engineering
• /
• v.10 no.1
• /
• pp.40-48
• /
• 2001

디젤엔진에 적합한 환경 친화적 연료로 평가받고 있는 디메틸에테르(DME)를 기존의 메탄올 탈수화에 의한 간접법 대신 합성 가스로부터 직접 합성법으로 제조하였다. 합성가스에서 메탄올을 합성하는 경우에 비해 화학 평형 상의 이점 때문에 DME를 합성하는 것이 경제적이며 이는 실험 결과와 일치하였다. 기상 반응기에서 메탄올 탈수촉매의 부가에 의한 메탄올 환산 생산량은 메탄올 합성촉매에 의한 생산량에 비해 두 배 이상의 증가를 보인다. 메탄올 탈수촉매를 Cu로 개질한 효과는 없었으며, 메탄올 탈수촉매로서 순수 감마알루미나가 가장 우수한 반응성을 보였다. 반응 조건이 25$0^{\circ}C$, 30atm일 때 고려된 GHSV 범위에서 촉매 적정 혼합비는 7:3, 합성 가스의 조성비는 $H_2$/CO=1일 때 가장 좋은 선택도와 수율을 나타내었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.26-32
• /
• 2005

In this paper, the effect of various regression models is investigated on structural optimization using the central composite method. Three bar truss and the upper platform of a satellite are optimized using various regression models that are polynomial, exponential and log functions. Response surface method is non-gradient, semi-global, discrete and fast converging in optimization problem. Sampling points are extracted by the design of experiments using the central composite method. Response surface is generated using the various regression functions. Structural analysis for calculating constraints is executed to find static and dynamic responses. From this study, it is verified that the response surface method has advantage in optimum value and computation time in comparison to other optimization methods.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.278-283
• /
• 1995

The potassium titanate fibres were synthesized with wet process by the addition of KOH solution to the TiOz gel produced by the reaction between element titanium particles and $H_2O_2$ solution at $50^{\circ}C$. And then they were characterized by XRD, SEM and FT - IR. It was found that potassium titanate fibres were mainly affected by KOH/TiOz mole ratio, synthesis time and aging time in this wet process employed. For $KOH/TiO_2 = 1/1$, synthesizing time 24 hrs, aging time 24 hrs and calcination temperature of TEX>$900^{\circ}C$ for 1 hr, their products were mainly found to be potassium tetratitanate which had thin and long fibres in the range of 10 ~ 20 mm. As the synthesizing time increased and the amount of KOH decreased, potassium tetratitanate was converted into potassium hexatitanate. Also, the length of their fibres became short.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.225-225
• /
• 2010

박막 방식의 CIGS 태양전지는 공정이 복잡하고 대면적화가 어렵다는 단점을 가지고 있다. 이를 개선하기 위하여 후막 방식을 이용한 CIGS 태양전지에 대한 연구의 필요성이 대두되어지고 있다. 스크린 프린팅과 같은 후막공정은 나노 CIGS powder가 필요하다. CIGS 합성 방법 중에 solvothermal 방식이 다른 방식에 비해 균일한 크기의 구형의 나노입자를 대량생산이 쉽기 때문에 많이 연구되어지고 있다. 선행 연구 결과들은 CIS, CIGS 및 CGS는 solvothermal 법으로 합성 시 3개의 상이 모두 합성되며, 합성조건에 따라 상의 조성의 조절이 되지 않는다. 따라서 현재까지 solvothermal 법으로는 단일상의 CIGS 상의 합성이 보고되지 않고 있다. 본 연구에서는, solvothermal 방식을 이용하여 후막공정을 위한 CIGS powder를 합성하였다. 원료, 용매 및 합성 온도 등의 변화에 따른 상의 변화를 측정하였고, 원료의 농도에 따른 powder의 크기 및 형상을 제어 하였다. 또한 CIGS powder를 이용하여 페이스트을 제조한 후, 이 페이스트를 가지고 태양전지를 위한 치밀한 후막을 제조할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.33-37
• /
• 2002

The phosphorescence powder, $SrA1_2O_4:Eu^{2+}$, synthesized by a Polymerized Complex Method(PCM), has been compared with that by a Solid-State Reaction(SSR), and their luminescence characteristics have been studied. The PCM powders were synthesized at $900^{\circ}C$ and the SSR powders at $1200^{\circ}C$. The size of PCM powders was about $0.1{\mu}m$ and one tenth of that of the SSR powders, which was due to the lower synthesized temperature. On the other hand, residual carbon in the PCM powders decreased with an increase in the crystallinity of host lattice, which was responsible for the non-white color of the powders. Both powders showed the maximum luminescence peaks around 520nm in the wave length at room temperature. However, the peak position for the PCM powders was shifted to a slightly lower wavelength and the value of half-width of the peak was broad comparing to that of the SSR powders, and the peak intensity decreased significantly. Such a change in the luminescence characteristics was due to the large difference in size for two types of powders and partly the residual carbon in the PCM powders.

• Proceedings of the Korean Association for Survey Research Conference
• /
• 2000.11a
• /
• pp.229-250
• /
• 2000

신뢰할 만한 소지역 통계 작성을 위한 다양한 소지역 추정 기법들이 최근 많은 관심속에 개발되고 있다. 이 논문은 다양한 소지역 추정 기법들 중 일부 기법들에 대한 간략한 소개 및 실례를 제시한다. 먼저 대표적인 소지역에 대한 간접추정법인 인구통계학적 방법, 합성추정법과 복합추정법에 관한 이론 및 추정절차를 살펴보았고, 모형 기반 추정법으로써 경험적 베이즈(EB) 추정법과 계층적 베이즈(HB) 추정법을 소개하였다. 마지막으로 합성추정법과 복합추정법을 이용하여 충북의 시군구 실업자 추정에 적용해 보았고, 시군구 실업자 추정결과를 직접 추정법의 결과와 비교하였다.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.143-147
• /
• 2012

Photocatalytic properties of $TiO_2$ nanopowders has been received much attention due to their high potentials for environmental applications such as remediation of polluted environments. The $TiO_2$ nanopowders doped with metal or non-metal elements have been synthesized by variety methods such as flame method, chemical vapor synthesis, sol-gel, ion implantation, which affect a doping behavior in different ways resulting in different surface characteristics, leading to different photocatalytic activity. In addition to an effect of synthesis methods, the photocatalytic activity of $TiO_2$ nanopowders can be improved by subsequent heat-treatments. In this study, to obtain a highly efficient photocatalyst, we synthesized $TiO_2$ nanopowders doped with tungsten by the chemical vapor synthesis method (CVS) and determined their physical properties and photocatalytic activity, together with subsequent post-treatment in the range of $300^{\circ}C$ to $700^{\circ}C$.