• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.5
• /
• pp.30-37
• /
• 2024

The valuation of infrastructure assets is typically conducted using the straight-line method, which employs the depreciated replacement cost as a basis. However, this approach has the limitation of failing to accurately reflect the actual value of the facility. In light of these considerations, the performance-based depreciation (PBD) method has been proposed as a means of evaluating the asset value of bridges on the basis of their performance, although it is not designed to take account of the environmental characteristics of individual bridges. This study proposes a hazard-performance based depreciation (HPBD) method that considers the risk level of individual bridges in the PBD method proposed in previous studies. The applicability of the proposed method was evaluated on more than 8,000 bridges. The risk factors for deterioration of bridges were selected, the hazard level of individual bridges was evaluated, and weights based on the hazard level were applied to the PBD method. The evaluation resulted in a present value comparable to that of the PBD method and a relatively high future value. It is postulated that the HPBD method, which considers the risk characteristics of individual bridges, can be used for a more reasonable evaluation and decision-making process.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.4
• /
• pp.113-132
• /
• 1999

Recently in Korea, application of the soil nailing is gradually extended to the sites of excavations and slopes having various ground conditions and field characteristics. Design of the soil nailing is generally carried out in two steps, The First step is to examine the minimum safety factor against a sliding of the reinforced nailed-soil mass based on the limit equilibrium approach, and the second step is to check the maximum displacement expected to occur at facing using the numerical analysis technique. However, design parameters related to the soil nailing system are so various that a reliable design method considering interrelationships between these design parameters is continuously necessary. Additionally, taking into account the anisotropic characteristics of in-situ grounds, disturbances in collecting the soil samples and errors in measurements, a systematic analysis of the field measurement data as well as a rational technique of the optimum design is required to improve with respect to economical efficiency. As a part of these purposes, in the present study, a procedure for the optimum design of a soil nailing excavation wall system is proposed. Focusing on a minimization of the expenses in construction, the optimum design procedure is formulated based on the genetic algorithm. Neural network theory is further adopted in predicting the maximum horizontal displacement at a shotcrete facing. Using the proposed procedure, various effects of relevant design parameters are also analyzed. Finally, an optimized design section is compared with the existing design section at the excavation site being constructed, in order to verify a validity of the proposed procedure.

• The Journal of Korean Society for School & Community Health Education
• /
• v.9 no.1
• /
• pp.85-97
• /
• 2008

Objectives: This study was designed to understand the oral health knowledge & conduct of middle-school students, search for the learning objective and the educational method in line with the subjects and of utilizing as the basic data for an effective oral health-care program. Methods: The samples to achieve the purpose of this research are composed of 139 students in middle-school, OO county. Chungcheongbuk-do, the number of male students 64, and female students 75. Data were statistically analyzed by frequency analysis, $x^2$-test or Fisher's exact test by using SPSS WIN Ver. 12.0. Results: Among items on oral-health knowledge in middle-school students. the awareness ratio on a cause and preventive method for oral disease was surveyed to be lower than the awareness ratio on symptoms of oral disease. As a result of examining by comparing knowledge and behavior on the time of tooth brush. both awareness and behavior were the level of 50% or less than it. In particular, 46.2% perceived after lunch. but practice just accounted for 33.0%. The frequency of tooth brush a day was the largest in a case(47.5%) of doing twice a day. However. there was also the response (5.8%) with saying of brushing once or not brushing even once. Thus, the practice of tooth brush was surveyed to be very low even if being a minority of students. The frequency of taking a light meal was 68.8% in less than twice a day. However, even students of taking more than five times were surveyed to be 9.8%. Out of the whole-body health in over 50%-59.9%. the oral health was surveyed to be perceived to be very important. Compared to the awareness level on importance of a tooth, the ratio of visiting a dentistry was analyzed to be very low. Conclusions: The study results suggest that the school oral-health project was examined to have the necessity of being expanded and carried out even in middle-and-high schools, by which the specific oral-health promotion program including oral-health education in this period is developed.

• Journal of the Korean Society of Radiology
• /
• v.7 no.1
• /
• pp.17-24
• /
• 2013

This study estimate radiation biological danger factor by measuring patient's exposed dose and propose the low way of patient's exposed dose in panoramic radiography. We seek correcting constant of OSL dosimeter for minimize the error of exposed dose's measurement and measure the Left, Right crystalline lens, thyroid, directly included upper, lower lips, the maxillary bone and the center of photographing that indirect included in panoramic radiography by using the human body model standard phantom advised in ICRP. In result, the center of photographing's level of radiation maximum value is $413.67{\pm}6.53{\mu}Gy$ and each upper, lower lips is $217.80{\pm}2.98{\mu}Gy$, $215.33{\pm}2.61{\mu}Gy$. Also in panoramic radiography, indirect included Left, Right crystalline lens's level of radiation are $30.73{\pm}2.34{\mu}Gy$, $31.87{\pm}2.50{\mu}Gy$, and thyroid's level of measured exposed dose can cause effect of radiation biological and we need justifiable analysis about radiation defense rule and substantiation advised international organization for the low way of patient's exposed dose in panoramic radiography of dental clinic and we judge need the additional study about radiation defense organization for protect the systematize protocol's finance and around internal organs for minimize until accepted by many people that is technological, economical and social fact by using panoramic measurement.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.1-29
• /
• 2013

Surrealism with the excavation of unconsciousness, seeking for the infinity etc. has established views on aesthetics that conflict traditional western rationalism. The main concern of surrealism is problem of identity and difference. They attempted their own mysterious concept such as 'the marvelous', 'convulsive beauty', 'object chance' etc. These unique views on aesthetics was expressed as various style of art. It is the d$\acute{e}$paysemant that exists one of the typical style in surrealism. D$\acute{e}$paysemant means that objects are taken from be originally place. Therefore, The real world's objects is to leave and change environment from real space as use, ability, meaning of origin. or it is the technique to create surreal illusion that combined to a strange place where relates to extraneous attribute of objects. Namely, objects are newly arranged in expression space. Reconstitutive objects by positioning object over the time and space have given us the marvelous and psychological shock and get unfamiliar meaning and feeling over. This paper is tried to look at the way to use the d$\acute{e}$paysemant which applicated in the media, Especially, focusing on animation. Unlike the other media, animation has its unique artistic characters. First, One of the media characteristics of the animation is creativity images of the hand drawn animation by shooting of frame by frame. The animation image which is created through arrangement obtain life force by unique motility. Works of Norman McLaren and Harry Smith are very interesting that the structural characteristics of the d$\acute{e}$paysemant. It consists with abstract forms and various moving images to let audience the feel characteristics of film. We can experience from these cases, numerous illusion fantasy like change over from creature to inanimate object, space and time, creation and extinction, repetition and metamorphosis etc. One of the main apparat is the emphasis of d$\acute{e}$paysemant in space of frame. In conclusion, d$\acute{e}$paysemant is one of the most characteristic expression technique of surrealism while having inevitable linkage with animation.

• Journal of Environmental Impact Assessment
• /
• v.29 no.5
• /
• pp.338-349
• /
• 2020

The importance of citizen participation, especially in urban planning, is increasing. Citizen participation is the sharing of control or influence on decisions and choices that affect stakeholders, and providing citizens with the opportunity to participate in the decision-making process. The paradigm of urban planning has also shifted from the rational planning model, which relied solely on the rationality of planners, to expand citizen participation. In fact, citizen participation in the process of establishing a vision for comprehensive plan is expanding, especially in metropolitan governments such as Seoul, Busan, and Daegu. However, there are criticisms that citizen cannot practically participate in urban planning due to limited participation methods and lack of participation in the pre-planning process. Accordingly, the necessity of institutionalization of citizen participation in the urban planning has been raised. According to literature reviews, foreign countries have integrated environmental impact assessment (EIA) into the urban planning to institutionalize citizen participation and pursue sustainability of the plan. In particular, the EIA actively includes citizen participation from the scoping stage to identify the issues. However, it was pointed out that there is a limitation to guaranteeing sustainability of the plan since EIA is carried out only at the urban project level. In other words, in order to expand citizen participation and ensure sustainability through the integrated approach, analysis of EIA in urban planning level is needed. Therefore, this study carried out a case study of EIA in the official development assistance of the Kenya multi-purpose dam construction to analyze the impact assessment in a wider scope than the urban project-level.

• Journal of Arbitration Studies
• /
• v.16 no.1
• /
• pp.343-373
• /
• 2006

지적재산권의 속지주의 원칙에 따라 전통적으로 지적재산권의 침해에 있어서 결과의 발생이 없는 행위지를 침해지로 인정하지 않았다. 어문과 예술작품을 보호하기 위해 1886년 체결된 베른협약(Berne Convention for the Protection of Literary and Artistic Works) 제5조 제1항은 저작자가 베른협약에 따라 보호되는 저작물에 관하여 본국 이외의 동맹국에서 각 법률이 현재 또는 장래에 자국민에게 부여하는 권리 및 이 협약이 특별히 부여하는 권리를 향유한다고 규정하여 내국민대우원칙을 천명하고 있다. 또한 베른협약 제5조 제2항은 저작권의 보호와 향유는 저작물의 본국에서 보호가 존재하는 여부와 관계가 없이, 보호의 범위와 저작자의 권리를 보호하기 위하여 주어지는 구제의 방법은 오로지 보호가 주장되는 국가의 법률의 지배를 받는다라고 규정하여 저작권 침해가 발행한 국가의 법률의 적용을 명시하고 있다. 인터넷과 무선통신 기술의 발달은 저작물을 디지탈 형식으로 실시간에 전세계에 배포하는 것을 가능하게 하였다. 특히 저작물의 인터넷상에서의 배포는 다국적 저작권 침해행위를 야기하여, 저작권자가 다수의 국가에서 저작권 침해소송을 제기하여 판결을 집행하는 것이 필요하게 되었다. 헤이그국제사법회의(Hague Conference on Private International Law)에서 1992년부터 논의되어 온 민사 및 상사사건의 국제재판관할과 외국판결에 관한 협약(Convention on Jurisdiction and Foreign Judgment in Civil and Commercial Matters)에서 채택된1999년의 예비초안(preliminary draft) 및 2001년 외교회의에서 수정된 잠정초안(Interim text) (이하 헤이그 협약 )은 저작권자가 저작권침해행위가 발생한 각 국가에서 저작권 침해행위를 금지하는 소송을 제기할 필요없이, 동 협약의 한 가맹국가의 법원의 저작권침해금지판결을 다른 가맹국가에서도 집행할 수 있는 가능성을 제시해 주는데 의미가 있다. 헤이그 협약 제10조는 불법행위(torts)에 관한 일반적인 재판관할에 관한 규정을 두고 있으며, 저작권침해에 관한 분쟁은 동 조항의 적용을 받는다. 제10조에 의해 당사자는 가해행위지 국가의 법원 또는 결과발생지 국가의 법원에서 소송을 제기할 수 있다. 결과발생지의 경우 제10조 1항 (b)는 피고가 자신의 행위가 본국의 법규에 비추어 동일한 성격의 손해를 초래할 수 있다라고 합리적으로 예견할 수 없었던 경우에 본 조항의 적용을 배제하고 있다. 인터넷을 통한 저작권침해의 경우, 피고가 자신의 국가의 법규하에서 합법적으로 저작물을 웹사이트에 게시하였으나, 그 행위가 다운로딩이 행해진 국가에서 불법인 경우, 피고는 저작권침해를 예견할 수 없었으므로 이에 문제가 제기된다. iCrave TV사건에서, 피고인 캐나다회사가 미국 및 캐나다에서 방송되는 텔레비젼 방송 프로그램을 자신의 웹사이트에 게시하여 이용자들로 하여금 컴퓨터를 통하여 방송을 재시청 할 수 있도록 하였는데 이는 캐나다에서 합법인 반면에 미국에서는 저작권 침해에 해당한다. 피고는 방송 프로그램을 인터넷상에서 재방송하는 것은 캐나다법상 합법이므로 저작권침해를 예견할 수 없었다고 주장하면서, 해당 사이트에 오직 캐나다 거주자만의 접속을 허용하고 미국 거주자의 접속을 제한하는 일련의 Click-Wrap 계약과 스크린 장치를 제공하였다고 주장하였다. 본 사건 피고의 주장을 받아들인다고 가정할 때, 제10조 1항(b)에 의해 원고는 결과발생지인 미국법원의 재판관할을 강제할 수 없을 것이다. 지적재산권을 둘러싼 분쟁에 관한 재판관할과 국제법상의 판결의 승인 및 집행의 통일성을 기하기 위하여 2001년 1월 세계지적재산권기구(World Intellectual Property Organization)가 제안한 WIPO 협약초안(Draft Convention on Jurisdiction and Recognition of Judgments in Intellectual Property Matters)은 헤이그 협약이 재판관할과 판결의 승인 및 집행에 대한 일반적인 접근을 하고 있는 점에 반하여 지적재산권자의 보호라는 측면을 고려하여 지적재산권침해소송에 국제재판관할권을 규정하고 있다. WIPO 협약초안 제6조는 저작권자가 저작권 침해를 막기 위한 합리적인 조치를 취한 국가에서 저작권 침해소송을 피할 수 있다고 규정하고 있다. 따라서 본 조항에 의할 경우, iCrave TV사건의 피고는 미국에서의 저작권 침해소송을 회피할 수 있을 것이다. 이상과 같이 헤이그 협약이 외국판결의 승인 및 집행을 가능하게 하고 있음에도 불구하고, 외국법원의 판결이 다수의 가맹국가에서 집행되지 못하는 가장 큰 장애는 대다수의 국가들이 외국법원의 판결이 공서양속(Public Policy)에 반하는 경우 판결을 승인하지 않는 예외규정을 두고 있기 때문이다. 미국의 경우, Uniform Recognition Act와 Restatement(Third) of Foreign Relations에 따른 공서양속의 예외규정(Public Policy exception)은 외국법원의 판결의 승인을 부인하는 근거가 된다. Yahoo! 사건에서 Yahoo! Inc.의 옥션 사이트를 통해 독일 나치 소장물의 판매가 이루어졌는데, 프랑스 형법상 이는 범죄행위에 해당하므로, 프랑스 법원은Yahoo! Inc.에게 프랑스 이용자가 당해 옥션 사이트에 접속할 수 없도록 모든 가능한 조치를 취할 것을 명하였다. 이에 미국 법원은 프랑스 법원의 판결은 Yahoo! Inc.의 미국헌법 제1 수정(First Amendment)의 언론의 자유(freedom of speech)에 반하므로 판결의 집행을 거부하였는데 이는 공서양속의 예외규정을 보여주는 예이다. 헤이그 협약 제28조와 WIPO 협약초안 제25조 또한 공서양속의 예외규정을 두고 있다. 본 논문은 인터넷과 통신기술의 발달로 야기되는 다국적 저작권 침해사건에서 한 국가의 법원의 저작권 침해금지판결이 다수의 국가에서 승인 및 집행될 수 있는 능성을 헤이그 협약과 WIPO 협약초안 및 미국판결을 중심으로 살펴보았다. 국제적으로 통일된 저작권법이 존재하지 않고 외국 판결의 승인을 부인하는 예외조항과 외국판결의 집행에 관한 각국의 이해관계와 준거법의 해석이 다른 현시점에서 지적재산권의 속지주의를 뛰어넘어 외국법원의 판결을 국제적으로 집행하는 것은 다소 어려움이 있어 보이나 국제적인 집행가능성의 열쇠를 제시하는 헤이그 협약과 장래의 국제조약에 그 기대를 걸어볼 수 있겠다.

• Journal of Intelligence and Information Systems
• /
• v.23 no.2
• /
• pp.139-160
• /
• 2017

Technology commercialization creates effective economic value by linking the company's R & D processes and outputs to the market. This technology commercialization is important in that a company can retain and maintain a sustained competitive advantage. In order for a specific technology to be commercialized, it goes through the stage of technical planning, technology research and development, and commercialization. This process involves a lot of time and money. Therefore, the duration and cost of technology commercialization are important decision information for determining the market entry strategy. In addition, it is more important information for a technology investor to rationally evaluate the technology value. In this way, it is very important to scientifically estimate the duration and cost of the technology commercialization. However, research on technology commercialization is insufficient and related methodology are lacking. In this study, we propose an evaluation model that can estimate the duration and cost of R & D technology commercialization for small and medium-sized enterprises. To accomplish this, this study collected the public data of the National Science & Technology Information Service (NTIS) and the survey data provided by the Small and Medium Business Administration. Also this study will develop the estimation model of commercialization duration and cost of R&D performance on using these data based on the market approach, one of the technology valuation methods. Specifically, this study defined the process of commercialization as consisting of development planning, development progress, and commercialization. We collected the data from the NTIS database and the survey of SMEs technical statistics of the Small and Medium Business Administration. We derived the key variables such as stage-wise R&D costs and duration, the factors of the technology itself, the factors of the technology development, and the environmental factors. At first, given data, we estimates the costs and duration in each technology readiness level (basic research, applied research, development research, prototype production, commercialization), for each industry classification. Then, we developed and verified the research model of each industry classification. The results of this study can be summarized as follows. Firstly, it is reflected in the technology valuation model and can be used to estimate the objective economic value of technology. The duration and the cost from the technology development stage to the commercialization stage is a critical factor that has a great influence on the amount of money to discount the future sales from the technology. The results of this study can contribute to more reliable technology valuation because it estimates the commercialization duration and cost scientifically based on past data. Secondly, we have verified models of various fields such as statistical model and data mining model. The statistical model helps us to find the important factors to estimate the duration and cost of technology Commercialization, and the data mining model gives us the rules or algorithms to be applied to an advanced technology valuation system. Finally, this study reaffirms the importance of commercialization costs and durations, which has not been actively studied in previous studies. The results confirm the significant factors to affect the commercialization costs and duration, furthermore the factors are different depending on industry classification. Practically, the results of this study can be reflected in the technology valuation system, which can be provided by national research institutes and R & D staff to provide sophisticated technology valuation. The relevant logic or algorithm of the research result can be implemented independently so that it can be directly reflected in the system, so researchers can use it practically immediately. In conclusion, the results of this study can be a great contribution not only to the theoretical contributions but also to the practical ones.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.1
• /
• pp.95-107
• /
• 2017

In this study, a preliminary study was undertaken for development of a tunnel incident automatic detection system based on a machine learning algorithm which is to detect a number of incidents taking place in tunnel in real time and also to be able to identify the type of incident. Two road sites where CCTVs are operating have been selected and a part of CCTV images are treated to produce sets of training data. The data sets are composed of position and time information of moving objects on CCTV screen which are extracted by initially detecting and tracking of incoming objects into CCTV screen by using a conventional image processing technique available in this study. And the data sets are matched with 6 categories of events such as lane change, stoping, etc which are also involved in the training data sets. The training data are learnt by a resilience neural network where two hidden layers are applied and 9 architectural models are set up for parametric studies, from which the architectural model, 300(first hidden layer)-150(second hidden layer) is found to be optimum in highest accuracy with respect to training data as well as testing data not used for training. From this study, it was shown that the highly variable and complex traffic and incident features could be well identified without any definition of feature regulation by using a concept of machine learning. In addition, detection capability and accuracy of the machine learning based system will be automatically enhanced as much as big data of CCTV images in tunnel becomes rich.

• Journal of Korean Society of Transportation
• /
• v.18 no.1
• /
• pp.75-85
• /
• 2000

In existing models in optimization, the crisp data improve has been used in the objective or constraints to derive the optimal solution, Besides, the subjective environments are eliminated because the complex and uncertain circumstances were regarded as Probable ambiguity, In other words those optimal solutions in the existing models could be the complete satisfactory solutions to the objective functions in the Process of application for industrial engineering methods to minimize risks of decision-making. As a result of those, decision-makers in location Problems couldn't face appropriately with the variation of demand as well as other variables and couldn't Provide the chance of wide selection because of the insufficient information. So under the circumstance. it has been to develop the model for the location and size decision problems of logistics facility in the use of the fuzzy theory in the intention of making the most reasonable decision in the Point of subjective view under ambiguous circumstances, in the foundation of the existing decision-making problems which must satisfy the constraints to optimize the objective function in strictly given conditions in this study. Introducing the Process used in this study after the establishment of a general mixed integer Programming(MIP) model based upon the result of existing studies to decide the location and size simultaneously, a fuzzy mixed integer Programming(FMIP) model has been developed in the use of fuzzy theory. And the general linear Programming software, LINDO 6.01 has been used to simulate, to evaluate the developed model with the examples and to judge of the appropriateness and adaptability of the model(FMIP) in the real world.