• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.516-517
• /
• 2013

Whole body vibration is very important for operators in construction equipment (CE) industry. There is ISO 2631 regulation to protect operators of CE. Recently WBV is one of critical performance parameters of CE to give operators much better comfortable working environment. And there are many kinds of numerically simplified human body model for the motor industry. We applied one human body model in ISO 5982 for the CE development at early stage. And we've checked the validity of this model to consider WBV by the operator comfort point of view.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.509-513
• /
• 2013

There are so many types of construction equipment. Excavator is one of typical construction equipment which is working under the tough and severe environments. It's important for engineers to design CE components by the vibration durability point of view. Traditionally, two typical vibration durability methods to verify the durability of components. The first is experimental method which is using the vibration durability test bench. But experimental approach on vibration durability is needed a lot of cost and time. The second is analytical method which is using the vibration durability analysis such as Dirlik, Stainberg, Lalanne and others methodologies. The one of main advantages on vibration durability analysis can reduce the cost and time. We present a vibration durability analysis process and methodology on the guardrail system in excavator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.942-947
• /
• 2002

In this study, reduction of airborne and structure-borne noise of naval ship pump is presented. Since piping system arrangement such as valve location, flexible joint, pipe diameter and elbow location, discharge basin affect greatly on the noise measurement, care must be taken to minimize the unnecessary noise from the piping system. It is shown that structure-borne noise of the motor with single resilient mount system exceeds criterion. Therefore, it is concluded that double resilient mount system is inevitable. Two kinds of mount is studied for upper mount; spring and rubber type. Although both mounts show good performance at low frequency including rpm frequency, 63Hz, spring mount is found to be inadequate at high frequency, because spring coil acts as a path for SBN.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.102-107
• /
• 2012

In this study, the design procedure of hybrid active mount by an electro-magnetic actuator is proposed to reduce the transmitted force from naval shipboard equipment to ship hull structure. The hybrid type mount which is composed of a passive rubber element and an electro-magnetic actuator is introduced and, through the vibration measurement for the objective pump system, the required force of the actuator is computed and discussed in detail. The initial designs were supposed for three types, one is moving coil type actuator and the others are moving permanent magnet type actuators. Based on the initial design concept, the final designs considering shock resistance and interference with mover and stator are proposed and examined.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.139-145
• /
• 2012

The shipboard working environment of navy vessel is very inferior to the ground working environment. For this reason, the crew of a navy vessel suffer from an occupational disease such as lumbar pain, hearing loss, etc. Although standard for navy vessel's environmental vibration is applied, the criterion of the environmental vibration is too high. So it doesn't help to improve habitability of crew. In this study, for improving its habitability of crew, the current vibration level of navy vessel was examined and the standard of navy vessel's environmental vibration was investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.618-626
• /
• 2011

Recent development of related technologies and efficient utilization of the entire country for the purpose of railway construction, and plans are being accelerated. the railway noise has been improved by increasing the high speed railway station, and accelerating the existing trains. Nord2000 which is an overseas noise prediction equation could not be applied directly to the domestic railway vehicles. So the specific vehicles in the Nordic countries which is a similar specification to domestic trains should be selected. Nord2000's accuracy was compared to Schall03, CRN's. Prediction of Ground impedance and Roughness class were carried out at different. In this paper, the result of selected vehicles for Nord2000 was as follows. S-1aX2 was for express trains, N-$^*2c$-3b was for Mugunghwa, S-Pass/wood was for Saemaul, N-4a was for freight trains, N-3a was for subway, the calculation time for Nord2000 took longer than others, in addition, Ground absorption was indispensable to calculate a noise map for Nord2000. As a result, CRN's prediction noise levels at Wonju-si was closest to the measurements. However, the predicted noise levels of Nord2000 was the most accurate.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.4
• /
• pp.232-237
• /
• 2014

A passive sonar of warship is composed of several directional or omni-directional sensors. In order to model the acoustic signal received into a warship sonar, the wave propagation modeling is usually required from arbitrary noise source to all sensors equipped to the sonar. However, the full calculation for all sensors is time-consuming and the performance of sonar simulator deteriorates. In this study, we suggest an asymptotic method to estimate the sonar signal arrived to sensors adjacent to the reference sensor, where it is assumed that all information of eigenrays is known. This method is developed using Taylor series for the time delay of eigenray and similar to Fraunhofer and Fresnel approximation for sonar aperture. To validate the proposed method, some numerical experiments are performed for the passive sonar. The approximation when the second-order term is kept is vastly superior. In addition, the error criterion for each approximation is provided with a practical example.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.447-452
• /
• 2017

A rigid body supported by 4 linear springs has been analyzed, to investigate the effects of eccentricities on the vibration responses for naval shipboard equipments supported by elastic mounts. Considering mount eccentricity (the location of the center of spring reaction forces relative to the mass center) and excitation force eccentricity (the location of the center of the excitation force relative to the mass center), the vibration phenomena have been formulated and discussed. Also, the effects of the eccentricities have been evaluated and discussed for the elastically mounted naval shipboard equipment. Results show that the mount eccentricity has little effects on the structure-borne noise above the natural frequency of the system, however the excitation force eccentricity has significant effects all over the frequency range.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.589-597
• /
• 2010

The indoor noise of the naval vessel is very important considering hearing protection, improvement of working environment and easily communication between crews. When the environment of the naval vessel suffering from the noise is considered, it is very important to be quiet in the living area where the crews have a rest sufficiently. In addition, the noise of the working area should be reduced in order to increase working efficiency. Therefore, in this research, the satisfactions about the indoor noise are survey for crews working in a naval vessel. Through this survey, the relationship between the indoor noise and crew's satisfaction about it can be found. As a result, the limit of sound pressure level which almost all crew can be satisfied with the indoor noise about their living and working area is suggested base on the survey in this research.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.2
• /
• pp.145-151
• /
• 2024

Recently, ship hull-mounted passive sonar system solution is needed in the perspective of improving target detection and elimination of vibration-induced noise. Our research team suggests acousticvibration matching method using front and rear signal of a sensor as the improvement of the problem above. Thus in this paper, theoretical background about matching method and its application on finite element method based multi-physics simulation are described. Furthermore, it is shown that target detection and hull vibration performance are improved by using matching method under the condition of our sensor system. Finally, practicality and future research are discussed.