• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.1-14
• /
• 2007

The Guemseong mine is located near the southern margin of the Jurassic Jecheon granitoids collectively with the Cambro-Ordovician mixed dolostone-limestone series of the Yeongweol Group, Choseon Supergroup. Here, two spatially distinct types of skarn formation have been observed. The upper transitional skarn is the calcic Mo skarn which has the mineral assemblage of $garnet+hedenbergite+epidote{\pm}wollastonite{\pm}magnetite{\pm}hematite{\pm}amphibole{\pm}chlorite{\pm}vesuvianite$ within the calcite marble. On the other hand, the lower proximal skarn occurs as a discordant magnesian Fe skarn at the contact of Mo-bearing aplitic cupolas with unidirectional solidification texture(UST) within the dolomitic marble. The magnesian Fe skarn has the mineral assemlage $olivine+diopside+magnetite+tremolite+serpentine+talc+chlorite{\pm}phlogopite$. The formation of two different types of skarn and ore mineralization in Geumseong mine have been attributed to multistage and complex metasomatic replacements that ultimately resulted in silicate-oxide-sulfide sequence of metasomatism. An early prograde stage with anhydrous skarn minerals such as olivine, clinopyroxene and/or garnet with magnetite, formed from high temperature (about $500^{\circ}\;to\;400^{\circ}C$) at an environmental condition of low $CO_2$ fugacity ($XCO_2<0.1$) and 0.5 kbar. The later retrograde stage with hydrous silicates such as amphibole, serpentine, phlogopite, epidote and chlorite with molybdenite or hematite, termed from relatively lower temperature (about $400^{\circ}\;to\;300^{\circ}C$).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1435-1442
• /
• 2008

The purpose of this study was to identify the influence of consumption value on healthy functional food choice. Also, this study explored the role of health motivation, health concern, and food involvement as a moderating variable in the relationship between consumption value and healthy functional food choice. A total of 281 responses were collected using on-site survey (response rate 96.0%) from college students in Daegu, Gyeoungbuk Province. The questionnaire contained questions on consumption value, health motivation, health concern, food involvement, and purchasing intention of healthy functional food. The respondents rated the items using a 5-point scale from 1 (strongly disagree) to 5 (strongly agree). According to the confirmatory factor analysis, item evaluating using factor loading resulted in the retention of 25 consumption value items loading on seven factors, four health motivation items loading one factor, six health concern items loading on one factor, and four food involvement items loading on one factor with an internal consistency. Results of stepwise regression found that social value-I, emotional, functional, epistemic, and conditional values among consumption value determined the purchasing intention of healthy functional food. Results of hierarchical regression showed that health concern had a positive effect on the relationship between social value-I and purchasing intention of healthy functional food.

• Journal of Global Scholars of Marketing Science
• /
• v.2
• /
• pp.17-37
• /
• 1998

중소기업간 협력 활동은 사업의 전체 혹은 일정 부분에 대하여 분업이나 협업의 관계를 맺는 공동사업의 형태로 나타난다. 기업간 연결의 강도에 따라 기업들간에 형성되는 분업과 협업의 관계를 시장형, 중간조직형, 위계조직형으로 구분할 때, 중소기업간 공동사업은 중간조직형에 속하는 일종의 기업간 네트워크라고 볼 수 있다. 물론 네트워크형의 협력관계를 추진하는 방식도 업무제휴, 지분제휴, 합작투자, 컨소시엄 등으로 다양하다. 그러나 완전한 자본적 통합에 따른 위계적 조직과는 달리 참여기업들이 독립성을 유지하면서, 네트워크 밖의 기업에 대해 경쟁우위를 확보하기 위해 형성한다는 공통점을 가지고 있다. 기업간 협력관계를 통해 참여 기업들이 얻을 수 있는 혜택에 관한 기존연구들은 크게 두 가지로 나누어 볼 수 있다. 하나는 기업의 생산함수를 중심으로 그 이점을 파악하는 것이고 다른 하나는 관계의 종류에 따라 기업간 거래관계를 관리하는 소위 거래비용의 효율성을 중심으로 혜택을 파악하는 접근방법이다. 전자의 접근방법을 따를 때, 기업간 협력의 근본 유인은 규모의 경제(혹은 비경제), 범위의 경제, 집적의 경제, 구도의 경제 등이 협력관계에서 발생하는 혜택의 근본 원천이다. 기술과 제도의 발전, 시장과 경쟁환경의 변화에 따른 기업간 협력의 필요성은 갈수록 증대되고 있다. 소비자들의 요구는 매우 개성화 다양화되고 종합화되는 추세이다. 더불어 기술개발의 비용이 큰 폭으로 증가하고 있으며, 경쟁의 격화로 기술 및 제품의 진부화도 급속도로 이루어지고 있다. 세계화 상품고도화 서비스산업화 정보화 등으로 특징지워지는 새로운 경쟁환경 아래에서 장기적으로 기업의 경쟁력을 향상시키기 위해서는 시장중심적인 관점에서 형성된 기업간 전략적 연계를 바탕으로, 정보의 집적을 통해 다양한 생산성 향상 혹은 관계효율성 향상의 경제를 추구하는 것이 필연적 전제 조건이 되었다. 기업간 경쟁보다는 최종제품의 생산과 판매를 위해 형성된 기업네트워크간의 경쟁이 중시되는 시대인 것이다. 동서간(東西間) 중소기업(中小企業)의 협력(協力)을 새삼스럽게 논의하는 것은 다분히 정치적이라는 느낌을 준다. 경제적인 관점에서 실익이 있음에도 불구하고 동서간 중소기업의 협력이 이루어지지 못하고 있다면, 그 이유는 기업정보의 수집과 유통상의 문제이거나 문화나 기업관행에 대한 잘못된 선입관에서 비롯된 관계 관리비용 계산상의 문제일 것이다. 현실적으로 이 가능성은 매우 낮다. 산업의 발전 정도나 연관성에 있어서 동서축보다는 남북축을 따라 기업간 협력이 이루어질 수 밖에 없는 우리나라의 현재 상황이 동서간보다는 남북간 경제교류를 유도하고 있는 것이다. 동서간 중서기업 협력체제의 구축에 대한 논의가 본질적으로 정치적 관심에서 비롯되었다는 전제 하에, 구축의 방안을 논의하고자 한다. 경제적으로도 타당하면서 정치적으로 관심을 유발할 수 있는 협력체제 구축방안으로, 기업간 네트워크의 조직 주체로서 최근에 논의되고 있는 새로운 형태의 마케팅회사를 동서간에 공동으로 설립할 것을 제안한다. 영구 지속적 공동사업관계보다는 프로젝트별 공동사업을 전제로 기업들 사이의 효과적인 네트워크를 형성함으로써 일종의 가상적 기업을 결성할 필요가 있다. 이러한 기업간 네트워크 형성의 실행주체가 될 수 있는 새로운 마케팅 전문기업의 형태로는 공동회사(空洞會社)(hollow company), 종합상사(綜合商社)(General Trading Company), 거래형 마케팅회사(Marketing Exchange Company), 변환형 마케팅회사(Marketing Coalition Company) 등을 들 수 있다. 양 지역에서는 소비자환경과 기술환경의 특성 및 양 지역의 경제에 대한 파급효과를 고려하여 가장 적합한 마케팅회사의 유형은 선택하여 육성하고, 이를 중심으로 강력한 양 지역 및 다른 지역에 입지한 기업간의 네트워크를 구축하여야 한다. 마케팅회사를 설립하고 완전한 마케팅 서비스를 제공할 수 있도록 육성하기 위해서는 많은 투자가 필요하다. 마케팅회사의 핵심기능 분야인 금융부문, 정보부문, 영업조직 등은 모두 막대한 투자를 필요로하는 기능영역이다. 정보부문은 기술의 발전과 범세계적인 정보관련기관과의 제휴를 통해 독자적인 구축이 어느 정도 가능하나, 영업조직의 구축을 위해서는 기존업체와의 연대가 필수적인 것으로 판단된다. 지속적으로 효과적인 기업간 네트워크를 형성하고 유지하기 위해서는 또한 기업간 관계를 관리하는 방식과 제도 및 수단에 대한 연구가 필요하다. 양 지역 산 학 관의 공동노력을 통해서 새로운 경제 환경에 가장 적합한 기업 형태로 제시된 바 있는 마케팅 전문회사 중심의 기업간 네트워크를 성공적으로 구축한다면, 양 지역 및 국가 경제의 지속적인 동력원이 될 수 있을 것이다

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.280-290
• /
• 2002

Three-dimensional (3-D) electromagnetic (EM) modeling algorithm has been developed using finite element method (FEM) to acquire more efficient interpretation techniques of EM data. When FEM based on nodal elements is applied to EM problem, spurious solutions, so called 'vector parasite', are occurred due to the discontinuity of normal electric fields and may lead the completely erroneous results. Among the methods curing the spurious problem, this study adopts vector element of which basis function has the amplitude and direction. To reduce computational cost and required core memory, complex bi-conjugate gradient (CBCG) method is applied to solving complex symmetric matrix of FEM and point Jacobi method is used to accelerate convergence rate. To verify the developed 3-D EM modeling algorithm, its electric and magnetic field for a layered-earth model are compared with those of layered-earth solution. As we expected, the vector based FEM developed in this study does not cause ny vector parasite problem, while conventional nodal based FEM causes lots of errors due to the discontinuity of field variables. For testing the applicability to high frequencies 100 MHz is used as an operating frequency for the layer structure. Modeled fields calculated from developed code are also well matched with the layered-earth ones for a model with dielectric anomaly as well as conductive anomaly. In a vertical electric dipole source case, however, the discontinuity of field variables causes the conventional nodal based FEM to include a lot of errors due to the vector parasite. Even for the case, the vector based FEM gave almost the same results as the layered-earth solution. The magnetic fields induced by a dielectric anomaly at high frequencies show unique behaviors different from those by a conductive anomaly. Since our 3-D EM modeling code can reflect the effect from a dielectric anomaly as well as a conductive anomaly, it may be a groundwork not only to apply high frequency EM method to the field survey but also to analyze the fold data obtained by high frequency EM method.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.66-72
• /
• 2009

The detection methods are required to monitor and diagnose the abnormality on the insulation condition inside a gas-insulated switchgear (GIS). Due to a good sensitivity to the products decomposed by partial discharges (PDs) in $SF_6$ gas, the development of a SWNT gas sensor is actively in progress. However, a few numerical studies on the diffusion mechanism of the $SF_6$ decomposition products by PD have been reported. In this study, we modeled $SF_6$ decomposition process in a chamber by calculating temperature, pressure and concentration of the decomposition products by using a commercial CFD program in conjunction with experimental data. It was assumed that the mass production rate and the generation temperature of the decomposition products were $5.04{\times}10^{-10}$ [g/s] and over 773 K respectively. To calculate the concentration equation, the Schmidt number was specified to get the diffusion coefficient functioned by viscosity and density of $SF_6$ gas instead rather than setting it directly. The results showed that the drive potential is governed mainly by the gradient of the decomposition concentration. A lower concentration of the decomposition products was observed as the sensors were placed more away from the discharge region. Also, the concentration increased by increasing the discharge time. By installing multiple sensors the location of PD is expected to be identified by monitoring the response time of the sensors, and the information should be very useful for the diagnosis and maintenance of GIS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.666-672
• /
• 1997

Twenty years' daily mean air temperature data was used to calculate the critical early seeding date(CESD), the optimum heading date(OHD), the critical late heading date for stable ripening(CHDR) and the critical late ripening date(CLRD) for rice seeded on dry paddy in different agroclimatic zones in Korea. The CESD was defined as the first day with mean air temperature of 13$^{\circ}C$, and the OHD as the first day of the 40 consecutive days with mean air temperature of 22$^{\circ}C$ or above after heading. The CHDR was defined as the date after which the cumulative daily mean air temperature would be at least 76$0^{\circ}C$. Lastly, the CLRD was defined as the last day when daily mean air temperature remains above 15$^{\circ}C$. This information was used for the estimation of periods from the earliest date of seeding to optimum heading date, the latest possible date of heading and the latest possible date of ripening in respective regions. For instance, in Suwon, those respective periods mentioned were found to be 104days, 124days, and 165days.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.968-974
• /
• 2010

We assessed the feasibility of discrete wavelet transform (DWT) applied for the spectral processing to enhance the estimation performance quality of soil organic matters using visible-near infrared spectra and mapped their distribution via block Kriging model. Continuum-removal and $1^{st}$ derivative transform as well as Haar and Daubechies DWT were used to enhance spectral variation in terms of soil organic matter contents and those spectra were put into the PLSR (Partial Least Squares Regression) model. Estimation results using raw reflectance and transformed spectra showed similar quality with $R^2$ > 0.6 and RPD> 1.5. These values mean the approximation prediction on soil organic matter contents. The poor performance of estimation using DWT spectra might be caused by coarser approximation of DWT which not enough to express spectral variation based on soil organic matter contents. The distribution maps of soil organic matter were drawn via a spatial information model, Kriging. Organic contents of soil samples made Gaussian distribution centered at around 20 g $kg^{-1}$ and the values in the map were distributed with similar patterns. The estimated organic matter contents had similar distribution to the measured values even though some parts of estimated value map showed slightly higher. If the estimation quality is improved more, estimation model and mapping using spectroscopy may be applied in global soil mapping, soil classification, and remote sensing data analysis as a rapid and cost-effective method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.260-267
• /
• 1995

In temperate zone planting rice at different date subjects the Crop to different climatic condition. The present study aimed at comparison of the change in source-sink relationship of the Japonica(J) and that of IndicaxJaponica(I$\times$J) type rice cultivars caused by shift of heading date. Two J- and two I$\times$J-type cultivars were made to head on August 16, August 26, and September 5. Sink capacity was changed by shift of heading date in different mode between the types of cultivars. In both types major determinant of sink capacity was number of effective tillers, and the number of spikelets per panicle was the minor. In J-type earlier planting/heading was beneficial to increased panicle numbers and this was due mainly to a larger diurnal difference in temperature. I$\times$J-type cultivars favored a higher daily mean temperature to increase the sink capacity. The ability of source at heading, in terms of leaf area per panicle, chlorophyll content per spiklet, photosynthetic ability of leaves per unit area at 25$\^{\circ}C$, carbohydrate and N contents of leaves, was not so different among different heading dates in both types. However, the source activity was governed principally by temperature during grain filling. The J-type cultivars headed on Sept. 5 and I$\times$J-type cultivars headed later than August 16 could not have had sufficient source activity in grain filling due to lower temperature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.98-102
• /
• 1995

Popped popcorn generally have a regular popping direction and typical shape. But the reason and mechanism are not clear yet. This experiment was carried out to investigate the shape moulding factor of popped popcorn. Pericarp thickness of tip-cap section of kernels is slightly thicker than that of top section and this fact provides the important information to the reason. Popping starts when the moisture pressure of heated popcorn is increased and reaches at the critical pressure. Therefore, in the same moisture pressure conditions, top sections are bursted first because their pericarp section is thinner than that of tip-cap section. At the very moment tip-cap sections pull down the top sections of peri carp as bi-metal does. So kernels which removed tip-cap section showed the irregular popping shape because they lost the tip-cap pericarp function. How-ever, kernels which removed embryo showed the typical popping shape but their popping volume was small due to emition and shortage of critical moisture pressure. But kernels which removed the whole pericarp and top pericarp were not popped at all because moisture was entirely emitting out of kernels. These results suggest that the shape moulding factor of popped popcorn is the pericarp thickness differences between the top and tip-cap section of kernels.