• Korean Journal of Environmental Biology
• /
• v.36 no.3
• /
• pp.400-411
• /
• 2018

This study was a survey of the Wonju stream in Wonju city from May 2015 to September 2016. A total of three sites were selected from the upstream area Gwanseol-dong to the downstream area Hojeo-myeon. Physicochemical analysis, aquatic insect changes, cluster analysis, functional group analysis, rarefaction curve, and statistical analysis were compared between 2004 and 2016. A total of 19 species (38.78%) in 2004 and 22 species (36.67%) in 2016 were analyzed, with the largest number belonging to ephemeroptera. The individual ratio ranged from 27,759.2 (ind. $m^{-2}$, 84.30%) in 2004 to 4,573.2 (ind. $m^{-2}$, 41.64%) in 2016, with the highest number involving diptera. As a result of the community analysis, significant differences were detected in the indices of dominance, diversity, evenness, and richness in 2004 and 2016 (p<0.05). Burrowers of the habitat orientation groups showed the greatest variation with an average of -68.00% (${\pm}2.15$) and the collector-gatherers of the functional feeding groups showed the highest variation of -40.12% (${\pm}1.77$). The rarefaction curve analysis suggested that the species was the poorest in the midstream regions in 2004 and 2016. Physical factors and water quality showed a significant correlation with diversity index, evenness index, and the number of individuals. MDS analysis of the similarity of upstream and downstream regions was high in 2004, and low in 2016. The differences were attributed to physicochemical changes such as increase in flow velocity due to improvement of small dams and changes in bottom structure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.55-60
• /
• 2010

Purpose: The shrinkage of dental resin cement may cause several clinical problems such as distortion that may jeopardize the accurate fit to the prepared tooth and internal stress within the restorations. It is important to know the polymerization shrinkage-strain of dental resin cement to reduce clinical complications. The purpose of this study was to investigate the polymerization shrinkage-strain kinetics of six commercially available dental resin cements. Material and methods: Three self-cure resin cements (Fujicem, Superbond, M-bond) and three dual-cure resin cements (Maxcem, Panavia-F, Variolink II) were investigated. Time dependent polymerization shrinkage-strain kinetics of the materials were measured by the Bonded-disk method as a function of time at $23^{\circ}C$, with values particularly noted at 1, 5, 10, 30, 60, 120 min after mixing. Five recordings were taken for each materials. The data were analyzed with one-way ANOVA and Scheffe post hoc test at the significance level of 0.05. Results: Polymerization shrinkage-strain values were 3.72%, 4.19%, 4.13%, 2.44%, 7.57%, 2.90% for Fujicem, Maxcem, M bond, Panavia F, Superbond, Variolink II, respectively at 120 minutes after the start of mixing. Panavia F exhibited maximum polymerization shrinkage-strain values, but Superbond showed minimum polymerization shrinkage-strain values among the investigated materials (P < .05). There was no significant differences of shrinkage-strain value between Maxcem and M bond at 120 minutes after the start of mixing (P > .05). Most shrinkage of the resin cement materials investigated occurred in the first 30 minutes after the start of mixing. Conclusion: The onset of polymerization shrinkage of self-cure resin cements was slower than that of dual-cure resin cements after mixing, but the net shrinkage strain values of self-cure resin cements was higher than that of dual-cure resin cements at 120 minutes after mixing. Most shrinkage of the dental resin cements occurred in the first 30 minutes after mixing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.175-184
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Chinese and the Japanese. Material and methods: Initial design of the adjustable dental trays was developed from the results of the dental arch size of Korean adults. This design was applied to the CAD-CAM process in order to create tray model samples. Simple silicon-base molds were then replicated based on these sample models. Polyurethane injection into the silicon- base molds completed the process of creating a large number of test products. 60 Chinese dental students (male:30, female:30) from the Shanghai Second Medical University and 60 Japanese alumni from the Kumamoto high school (male:30, female:30) were selected for taking irreversible hydrocolloid impression with these trays. The width and length of the impression body were measured on several measuring points by Vernier caliper. The results were analyzed statistically to evaluate the fitness of the trays. Results: 1. Uniform impression material thickness was achieved on the Chinese and Japanese by controlling the width of the tray using stops and beveled guides. The material thickness was generally within the range of 3 mm to 6 mm. 2. In the maxillary tray of the Chinese, average thickness of the impression material of the labial vestibule of the incisal teeth was 6.2 mm, the canine was 5.9 mm and the midpalatal part 10.5 mm and the posterior palatal part 9.7 mm. These were relatively large values. 3. In the mandibular tray of the Chinese, average length of the impression material of the lingual vestibule of first, second premolar contact point was 8.9 mm, the incisal teeth was 7.8 mm and thickness of the labial part of canine was 6.8 mm and premolars 7.0 mm. These were relatively large values. 4. In the maxillary tray of the Japanese, average thickness of the impression material of the labial vestibule of the incisal teeth was 7.4 mm, the canine was 7.7 mm and the midpalatal part 9.1 mm. These were relatively large values. 5. In the mandibular tray of the Japanese, average thickness of the impression material of the labial vestibule of first, second premolar contact point was 8.4 mm, and thickness of the labial part of canine was 7.4 mm. These were relatively large values. Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Chinese and Japanese, we can take more easy and accurate dental impressions.

• Journal of Korean Historical Folklife
• /
• no.46
• /
• pp.195-237
• /
• 2014

Palsapum are ornaments to reveal the purpose of commander of three naval forces as well as symbols to remember the greatness of admiral Yi, Sun-Shin. In 1966, ther were designated as a treasure No. 440 based on their value; however, they have not received attention from academia because they are relics from China. This study compares and analyzes the document, paintings, and relevant references from Korea and China focusing on Palsapum, understands their formal characteristics, and examines their historical value such as years and location of creation. As a result, the study determines five of them are original, but three of them were newly created by the later generations. The five, Dodogin (都督印, Commander's seal)·Yeongpae (令牌, Commander's tablet)·Gwido (鬼刀, Replica of the devil sword)·Chamdo (斬刀, Replica of the decapitation swor d)·and Gognapal (bugle) were created by Ming Dynasty before 1598, and delivered by the hands of General Chen Lin. The other three, Dokjeongi (督戰 旗, Battle flag)·Hongsoryeonggi (紅小令旗, Commander's flag)·and Namsoryeonggi (藍小令旗, Commander's flag), were created in 19th century by Joseon Dynasty. After analysis on the former relics, the study determines that they are not official relics with the dignity of Ming Dynasty but personal relics with regional characteristics; in other words, Palsamun are not the royal gifts from Emperor Shenzong to Admiral Yi, Sun-Shin. but personal momentoes left by General Chen Lin in the Tongjeyoung to celebrate the admiral. The names, variety, numbers, and appurtenances of Palsapum have been changed with time as follows. First, the scholars of Jeseon in 17the century only focused on Dodogin. It was certainly created in Ming Dynasty; however, it was a personal stamp, so considered to be not from the emperor but from General Chen Lin. Second, Palsapum was called Palsamul and consisted of 14 pieces of 8 kinds in 18the century, ; it is confirmed on the 「Dosul(圖說, stories with pictures of」 『Yi Chungmugong Literary Collection』 The sizes of five relics including Dodogin are similar to the records, but their patterns and shapes are exotic, or cannot be found in Joseon. Thus, they reflect the regional characteristics of Guangdong province. Third, they were called Palsapum, and consisted on 15 pieces of 8 kinds in 19th century; it is confirmed on , a sixteen-fold folding screen drawn by Shin, Gwan-Ho in 1861. The stamp box, tablet bag, and three flags were newly created to engrave Joseon style letters and patterns on damageable materials such as leather and cloth. The relics easy to be destroyed have been renewed even after 19th century. Last, there are many misunderstandings about Palsapum by governmental indifference and improper management of records even though they were designated as a treasure in very early times. Thus, authorities should be concerned with Palsapum to provide the measures for stable maintenance of the relics; this will let people remember not only the history of cooperation between Korea and China to stop the Japanese ambition, but also Admiral Yi, Sun-Shin and General Chen Lin to bring victory in Japanese invasions of Korea.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.243-248
• /
• 2010

Two suspicious events, which were claimed as underground nuclear tests by North Korea, were detected in the northern Korean Peninsula on October 9, 2006 and May 25, 2009. The KIGAM and Korea-China Joint seismic stations are distributed uniformly along the boundaries between North Korea and adjacent countries. In this study, the data from broadband stations with the distance of 200 to 550 km from the test site are used to analyze and compare two nuclear tests of North Korea. By comparing the time differences of the Pn-wave arrival times of 1st and 2nd tests at multiple stations, the relative locations of two test sites could be calculated precisely. From the geometrical calculation with the velocity of Pn wave $V_{Pn}$ = 8 km/s, the 2nd test site is estimated to move in the WNW direction from 1st one with the distance of 2 km. Body wave magnitude, mb of the 2nd test, which was announced officially as the network average of 4.5, varies widely with the directional location of stations from 4.1 to 5.2. The magnitude obtained from Lg wave, $m_b$(Lg), shows less variation between 4.3 to 4.7 with the average of 4.6. The moving-window spectra of time traces of 1st and 2nd tests show very similar pattern with different scale level. In addition, the corner frequencies of P wave of 1st and 2nd tests at each station show no or negligible difference. This indicates the burial depths of two tests might be very similar. The relative yield amount of the 2nd test is estimated 8 times larger than that of the 1st from the weighted average of ground-velocity amplitude ratios.

• Cross-Cultural Studies
• /
• v.42
• /
• pp.451-474
• /
• 2016

Analysis of the syntactic structure of the modern Chinese adverbs for time 'Cengjing (曾經)' and 'Yijing (已經)' was performed to examine the tenses and aspects of the terms. The corresponding Korean words were examined and the terms in both languages were compared. The syntactic structures used in China and South Korea were found to be different. We hope the study of the Chinese language will help Korean students. 'Cengjing (曾經)' specific projects with 'aspect' of, 'Past experience aspect', 'Past continuous aspect', 'Past continuous aspect' in the past tense. [ED: unclear, please reword] These correspond to '_었 (았)_', '_었었_' in the Korean language. 'Yijing (已經)' has 'finished phase' of concrete projects, 'Past experience aspect', 'Past continuous aspect', also has a specific project tense, the 'past tense', 'present tense', 'future tense', and so tense. [ED: unclear, please reword] Adjectives can also be modified with a 'change of status'. These correspond to '_었 (았)_', '_고_', '_었었_', '곧' etc. in Korean. 'Cengjing (曾經)' and the dynamic auxiliary 'Guo (過)' were compared to determine whether they have the aspect and tense features. However, 'Guo (過)' can only modify the predicate verb, so it possesses only aspect characteristics. 'Cengjing (曾經)' modifies the range more widely. 'Yijing (已經)' may be modified by the adverb 'Zai (在)' whereas 'Cengjing (曾經)' may not. Additionally, 'Yijing (已經)' can be modified by predicate adjectives and noun predicates, while 'Cengjing (曾經)' cannot.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.325-329
• /
• 2015

Purpose: The aim of this study was to compare the film thicknesses of several resin cements as a function of time after mixing and to examine the effect of working time on the film thicknesses. Materials and methods: The film thickness (${\mu}m$) of 4 resin cements (n=10), 1 composite resin (Panavia F 2.0), 3 self-adhesive resin (Clearfil SA luting, Zirconite, RelyX U200) cements was measured at 20-second intervals after mixing of the cements up to 200 seconds under a load of 50 N. Linear regression was fitted to verify the effect of working time on the film thickness of each cement. Data were compared to the working time recommended by manufacturers using Wilcoxon test ($\alpha$=.05). Results: All of the materials showed a positive linear correlation between the film thickness and working time. There was no statistically significant difference between the working time based on our results and the values recommended by the manufacturers even though there was a discrepancy between those two values. Conclusion: The film thickness of resin cements could increase with the increase of working time. Working time to meet the ISO standard of $50-{\mu}m$ maximum film thickness could be different from the manufacturer's recommended value.

• Korean Journal of Environment and Ecology
• /
• v.34 no.2
• /
• pp.121-129
• /
• 2020

This study investigated the change of benthic macroinvertebrates community due to erosion control dams installed in Wonju, Gangwon by comparing the data before and after a rainy season. It selected a closed-type erosion control dam (boulder stone), an open-type erosion control dam (buttress), and a control area and surveyed two upstream points and two downstream points four times between March and September 2019. The flow velocity mostly increased in the closed-type, open-type, and control areas but decreased in St. 3 after the rainy season. The number of benthic macroinvertebrates species and their populations mostly decreased after the rainy season, and the rate of decrease in the populations in the open-type and control areas were more similar than the closed-type area. Species and populations of the EPT groups mostly decreased after the rainy season. A result of the similarity analysis showed that the closed-type and open-type areas were separated by 38.4% with the control area before the rainy season, but the open-type and control areas were separated by 51.3% with the closed-type area after the rainy season. A result of the principal components analysis (PCA) based on axis 1 showed that the closed-type area had a positive value before and after the rainy season, and the open-type and control areas had a negative value before and after the rainy season. The open-type area was more correlated with the control area than the close type. The analysis of the EPT groups showed the distribution of Ephemeroptera in the closed-type area and Trichoptera in the open-type and control areas. The result of this study shows that the installation of erosion control dam can cause changes in benthic macroinvertebrates community and that the open-type area had a smaller difference community difference from the control area after the rainy season than the closed-type area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.82-89
• /
• 2014

Purpose: The purpose of this study was to observe the change of viscoelastic properties of dental resin cements during polymerization. Materials and methods: Six commercially available resin cement materials (Clearfil SA luting, Panavia F 2.0, Zirconite, Variolink N, RelyX Unicem clicker, RelyX U200) were investigated in this study. A dynamic oscillation-time sweep test was performed with AR1500 stress controlled rheometer at $32^{\circ}C$. The changes in shear storage modulus (G'), shear loss modulus (G"), loss tangent (tan ${\delta}$) and displacement were measured for twenty minutes and repeated three times for each material. The data were analyzed using one-way ANOVA and Tukey's post hoc test (${\alpha}$=0.05). Results: After mixing, all materials demonstrated an increase in G' with time, reaching the plateau in the end. RelyX U200 demonstrated the highest G' value, while RelyX Unicem (clicker type) and Variolink N demonstrated the lowest G' value at the end of experimental time. Tan ${\delta}$was maintained at some level and reached the zero at the starting point where G' began to increase. The tan ${\delta}$and displacement of the tested materials showed similar pattern in the graph within change of time. The displacement of all 6 materials approached to zero within 6 minutes. Conclusion: Compared to other resin cements used in this study, RelyX U200 maintained plastic property for a longer period of time. When it completed the curing process, RelyX U200 had the highest stiffness. It is convenient for clinicians to cement multiple units of dental prostheses simultaneously.

• The Journal of Korean Philosophical History
• /
• no.36
• /
• pp.319-352
• /
• 2013

This paper aims to compare Liang Shu-Ming and Lee Don-Hwa's perceptions of modernization and the philosophical grounds of their perceptions during the New Cultural Movement period in Korea and China. Although Liang and Lee had different levels of enthusiasm towards New Cultural Movement, they shared many commonalities in their attitudes to Western modernization and their philosophical justifications for such attitudes. Liang Shu-Ming not only held positive views of Western modernization, but also examined the spiritual dynamics contributing to the development in science and democracy in Western countries. By analyzing the three fundamental questions of life, three kinds of human attitudes toward life, three types of culture derived from human attitudes, and the recapitulation theory, Liang systematically reviewed the spiritual dimension of Western modernization. Liang defined the spirit of Western modernization as a calculative rationality based on egoism and the separation of Self and Other. Such a statement demonstrates Liang's keen insights towards Western modernization. Meanwhile, although Lee Don-Hwa basically held positive views of Western modernization, from the beginning, he pointed out the problems with Western modernization and attempted to overcome these problems by employing the "human is heaven" doctrine of Cheondogyo. While Lee embraced modern science and the theory of evolution, he also insisted on the legitimacy of mysticism and the compatibility of the creation theory of Cheondogyo and the theory of evolution. Although Lee employed the concepts in Western philosophy of life, he also emphasized the interdependence, reciprocal relationship, and connectedness between Self and Other from the perspective of Cheodogyo doctrine. From the fact that Lee Don-Hwa transcended the modernization theory when he was applying it to answer questions, it seemed that Lee preceded Liang Shu-Ming. Nevertheless, Lee did not demonstrate the keen insight into the spiritual dimension of Western modernization, and his criticism against Western modernization did not touch upon the problem of rationality as Liang did.