• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.214-216
• /
• 2008

현재 전력수급기본계획은 전국을 한일권으로 하여 발전계획을 수립하고 송변전설비계획을 수립하고 있다. 그러나 발전설비와 송변전설비는 하나의 망으로 연결되어 상호 보완적 영향을 주기 때문에 수급계획시 두 설비를 동시에 평가하는 것이 무엇보다 중요하다. 본 논문에서는 혼합정수형 선형계획법(MIP)을 이용하여 발송전 전력설비를 통합적으로 최적 구성할 수 있는 방안에 대하여 분석하였다. 전력수급기본계획 수립시 제출된 건설의향설비에 대해 송변전설비와 통합하여 적정 예비율을 갖는 최적설비 구성방안을 수립하고, 이때의 설비투자비와 운전비를 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.273-275
• /
• 2003

본 실험은 고출력 반도체 레이저의 p-side-down 마운팅용 솔더로서 AuSn 합금 솔더(80wt%:20wt%)의 적합성에 대해 연구하였다. $1{\mu}m$이하의 균일도로 폴리싱 된 Cu heat sink의 표면에 두께 $1{\mu}m$의 Ni로 코팅을 한다음, AuSn 다층박막은 e-beam 증착기로 AuSn 합금 솔더는 열증착기로 각각 증착하였다. 열처리는 산화 방지를 위해 $N_2$ 분위기에서 행하였으며, 동일한 압력으로 마운팅을 하였다. 표면의 거칠기와 형상은 AFM(Atomic Force Microscope)과 SEM(Scanning Electron Microscopy)으로 그리고 Au와 Sn의 성분비는 AES(Auger Electron Spectroscopy) 로 비교하였다. 또한 CW(연속발진)을 통한 L-I(Light-Current)측정을 통해 본딩상태를 비교하였다.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.990-993
• /
• 1987

A digital subscriber loop transmission is a key technology to provide end-to-end digital connectivity for Integrated Service Network. And the equalization of the signal is needed for a fully digitalized connection between subscriber's premises because of the limited transmission characteristics of existing subscriber loop. This paper describes the switched capacitor equalizer for the 2B+D data transmission in TCH on existing subscriber loops.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.797-799
• /
• 1999

In this paper, the edge intensification and detection algorithm which is one of image processing operations is considered. Edge detection algorithm is the most useful and important method for image processing or image analysis. The vision system based on these processing and concerned in specific project is proposed and is applied to the inverted pendulum in order to automatically acquire the angles between the bar and the perpendicular reference line. In this paper, the angles that are obtained from some images of computer vision system can offer useful informations for control of real inverted pendulum system. Next, the inverted pendulum will be controlled by the proposed method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.203-205
• /
• 2003

레이저 다이오드를 p-side-down 방식으로 본딩하기 위하여 AuSn 솔더합금을 증착한 후 온도와 압력, 시간을 변화시켜 본딩상태를 조사하였다. CuW위에 adhsion layer와 확산방지층을 각각 $500{\AA}$과 $2000{\AA}$을 증착하였으며 솔더층으로 AuSn을 $2.6{\mu}m$ 증착 하였다. 열처리는 질소 분위기에서 행하였으며, 표면의 거칠기는 AFM으로 측정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.117-121
• /
• 2002

In this paper, the proper manufacturing method to the use of Illite with many application was studied. We confirmed merit of manufacturing and forming according as respective temperature. The variety of crystallization and surface was confirmed by X-ray diffraction(XRD) analysis and SEM. Then, we performed the experiments such as a antibiosis, a heavy metal adsorption and a gas deodorizaton to confirm the function of Illite. As a result, the adsorption of gas decreased according as the heat treatment of Illite, but the ability of antibiosis wasn't changed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.242-246
• /
• 2002

인체의 손가락 끝에서 발생하는 맥의 파형과 온도, 피부저항을 측정할 수 있는 복합센서를 설계 제작하였다. 인체신호를 계측하는 여러 가지 방법 중에서 손가락 끝의 맥 파형을 계측하고자 광센서를 활용하여 계측시스템을 구현하였고 특성을 평가하였다. 그 결과 체온측정은 대략 $0.01^{\circ}C$의 분해능을 구현 할 수 있었고, 피부저항 측정은 최대 $5M{\Omega}$까지 측정 가능하고 최소분동은 $5k{\Omega}$ 정도이며, 맥박측정은 새롭게 포토센서를 적용하여 미소진동을 측정할 수 있었다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.8
• /
• pp.400-405
• /
• 2001

Quadrature Amplitude Modulation(QAM) is well known a bandwidth efficient modulation scheme. However, its use for mobile communications has been limited due to noise and signal distortion. Recently, the QAM scheme is emerging as a new modulation scheme for a band-limited wireless system. In this paper, we propose an iterative decoding algorithm assuming QAM signal for a narrow-band mobile channel. The Algorithm is based on the EM(Expectation Maximization) Algorithm, and the performances of the proposed decoder are assessed using computer simulation. The simulation results show that the proposed decoder perform better compared to that of other schemes.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1494-1496
• /
• 1997

The MRI Magnet is a most practical application of NbTi superconductor. In this paper, we present the main research results on superconducting wires for MRI magnet which we have developed. Cu/NbTi superconducting wires were fabricated by repeat of cold working and heat-treating process after that billets were extruded. We investigated the relation of superconductivities of wires and heat treatment condition. The correlation between cross section shape of wires and work inhomogeneity of NbTi rods was investigated by microscopic observation. The more repeatation number of cold working and heat-treating process, the higher critical current is achieved.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2395-2397
• /
• 2000

In this paper, a new method for color measuring is presented using fuzzy modeling technique. The fuzzy and polynomial inferences are used for obtaining RGB characteristic curve. The eight RGB real data from expert dye-stuff manufacturer, are simulated. The results show that the proposed method is more excellent than other methods, in the color measuring process of textile field.