• Journal of Environmental Science International
• /
• v.21 no.10
• /
• pp.1287-1295
• /
• 2012

Abnormal change in Gyeongpo beach shoreline in June of 2012 was illustrated using DGPS (Differential Global Positioning System, resolution < 0.6m) observation and drift experiment. Abrupt change in the shoreline was occurred in the latter part of June, 2012, this change was compared with that in June from 2009 to 2011. In the northern part of the beach, sand accumulated and it made beach extension and movement of the shoreline towards sea compared with that in June from 2009 to 2011. While on the other, in the southern part, the beach was eroded and it formed a steep slope around the southernmost of the beach. The shoreline in the southern part of the beach was shifted more towards land than that in the past. Change in the position of shoreline was higher in the northernmost and southernmost of the beach compared with those in the other parts. Drift in the southern part of the beach moved faster along the beach than that in the northern part of it.

• Journal of Environmental Science International
• /
• v.20 no.11
• /
• pp.1425-1435
• /
• 2011

Time-series change in Gyeongpo beach shoreline was illustrated using DGPS(Differential Global Positioning System, resolution < 0.6m) observation from April, 2009 to April, 2010. The shoreline was subdivided into 12 areas, and westward and eastward movement of shoreline position at each area was calculated. In general, the shoreline moved toward sea during summer, and it moved toward land during winter. The southern and northern part of the shoreline had different pattern in time-series. The shoreline in the southern part moved toward sea during summer and moved toward land during winter, but time-series pattern of the shoreline in the northern part was more complicated than that in the southern part. Pattern of time-series change in the northern part was made up of three different types; the first is that the shoreline moves continuously toward land, and the second thing is that the shoreline's movement is the opposite to the southern part, and the third thing is that the shoreline maintains a state of equilibrium without any great fluctuation. The total length of the shoreline was the largest during winter and the smallest during summer. In general, time-series change in the shoreline had positive(+) relationship with sea surface pressure and wind speed.

• Journal of Radiation Protection and Research
• /
• v.27 no.3
• /
• pp.171-179
• /
• 2002

The three-dimensional long-range dispersion model has been developed to understand the characteristics of the transport and diffusion of radioactive materials released into atmosphere. The model is designed to compute air concentration and ground deposition at distances up to some thousands of kilometers from the source point in horizontal direction. The vertical turbulent motion is considered separately within the mixing layer and above the mixing layer. The test simulation was performed In the area of Northeast Asia. The release point was assumed in the east part of China. The calculated concentration distributions art mainly advected toward the southeast part of release point by the wind fields. The developed model will be used to estimate the radiological consequences against a nuclear accident. The model will be supplemented by the comparative study using the data of the long-range field experiments.

• Journal of Radiation Protection and Research
• /
• v.27 no.3
• /
• pp.165-170
• /
• 2002

Combined with deposition model onto the ground of radionuclides, the influence of radioactive contamination to agricultural products was analyzed due to wet deposition as well as dry deposition from radioactive air concentration during a nuclear emergency. The previous dynamic food chain model, in which initial input parameter is only radionuclide concentrations on the ground, was improved for the evaluating of radioactive contamination to agricultural products from either radionuclide concentrations in air or radionuclide concentrations on the ground. As the results, in case of deposition onto the ground, wet deposition was more dominant process than thy deposition. While the contamination levels of agricultural products were dependent on the a variety of factors such as radionuclides and rainfall rate. It means that the contamination levels of agricultural products are determined from which is more dominant process between deposition on the ground and interception onto agricultural plants.

• Journal of Radiation Protection and Research
• /
• v.30 no.4
• /
• pp.247-252
• /
• 2005

The main idea of this paper is to present the general attributes of the current IAEA programs and their prospects in the arena of occupational radiation protection, thus responding to a need to attain a consolidated understanding of the Agency's programs for an effective and efficient deployment of the respective national R&D projects in Korea. In addition, the considerable and beneficial benefits from a participation in the IAEA programs have been analyzed and their immediate relevance has been emphasized. A strategy for the enhancement of an active participation in the program and its efficient implementation has also been established. It is expected that the suggested recommendations such as the long term strategy and the relevant guidelines will be helpful in establishing a nuclear policy for the further development of the international cooperative projects in the future.

• Journal of Radiation Protection and Research
• /
• v.29 no.2
• /
• pp.91-96
• /
• 2004

A practical methodology for the determination of derived intervention levels (DILs) on relocation following an accidental release of radionuclides was designed based on dose rate on the ground. The influence of DILs was investigated with respect to the change of parameter values, which are dependent on socio-environmental characteristics in distinction from temporary and permanent relocations. The DILs on relocation showed a distinct difference depending on effective removal half-life of radionuclides following a deposition, delay time in measurement and residential characteristics. In particular, the delay time. In measurement was an important factor in determination of DILs in the case of an assumption that dose rate on the ground declines in a power function, not in an exponential function. The DILs showed lower numerical values as longer effective half-life, longer delay time In measurement and longer exposure time.

• Journal of the Korean Ceramic Society
• /
• v.15 no.4
• /
• pp.213-223
• /
• 1978

The purpsoe of this study was to produce domestic stamping materials; sling mass which could be used as unburned refractory for iron melt'ladle. Batch compositions were based on Belgian Ladelite; mineral compositions were composed of 84 wt% of quartz and 16 wt% of clay, and particle sizes were divided into 12 wt% of 1410/297㎛, 18wt% 297/149㎛, 20wt% of 149/74㎛, 11wt% 74/44㎛ and 39wt% 44㎛ under. The effect of variable batch compositions were also investigated such as substitution of pyrophylite or industrial grade alumina for quartz and of zircon for portion of quartz and clay, increase of clay and addition on sericite. Samples were pressed at 100kg/㎠ with 7.4wt% of water or 7.4wt% of 4 wt% PVA solution. Dried and Fired properties of samples such as linear shrinkage, apparent porosity, modulus of rupture, refractoriness and corrosion resistance to blast furnace slag were investigated. The results are summarized as follows. 1. Dried samples are shrinked, but fired at 700-1400℃ expanded. Samples fired at 700-1000℃ and 1200-1400℃ tended to expand with incresing of firing temperature, but fired at 1000-1200℃ tended to shrink with increase of firing temperature. 2. Apparent porosity of samples fired at 700℃ is increased, but fired at 1200-1400℃ decreased with increasing of firing temperature. 3. Modulus of rupture of samples fired at 700℃ is decreased, but fired at above 700℃ increased with increasment of firing temperature. 4. Dried samples with 7.4 wt% of 4 wt% PVA solution better improve modulus of rupture than with 7.4 wt% of water, but the firing strength of the sampels fired at 700-1000℃ is showed reversely. 5. In quartz-clay system, mineral phases of samples fired at above 1200℃ are consisted of α-quartz, α-cristobalite and mullite. Respectively as firing temperature was rising up, intensity of α-cristobalite and mullite is in creased. 6. Quartz-Kibushi clay system, Kimcheun quartz(substitutuion of portion of industrial grade alumina for quartz) Hampyeung clay system and pyrophyllite-clay system are better in corrosion resistance to blast furnace slag than burned pyrophyllite brick. 7. 84 wt% of pyrophyllite-16wt% of clay system is superior in modulus of rupture and corrosion resistance to blast furnace slag to 84 wt% of quartz-16 wt% of clay system.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.423-428
• /
• 2013

Porous YSZ ceramics are fabricated using 3 mol% yittria-stabilized zirconia (3YSZ) and NiO with different particlesizes (0.6 and 7 ${\mu}m$). Nickel oxide (NiO) is added to the YSZ powder as a pore former with different amounts(40, 50, and 60 vol%) and at different sintering temperatures (1350 and $1400^{\circ}C$) are applied in order to evaluate the temperature effects on the pore and mechanical properties. Heat treatment is conducted after sintering at $700^{\circ}C$ in $H_2$ for the NiO reduction process; then, Ni is removed using a $HNO_3$ etchant solution. According to the NiO contentand sintering temperatures, 41-67% porous YSZ ceramic is obtained and the flexural strength increases, while the porosity decreases with an increasing sintering temperature. The optimum flexural strength ($136.5{\pm}13.4MPa$) and porosity (47%) for oxygen transport porous YSZ membrane can be obtained with 40 vol% of 7 ${\mu}m$ NiO particle at a sintering temperature of $1350^{\circ}C$.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.4
• /
• pp.721-737
• /
• 2014

The Resident Registration Number(RRN) system has been effectively acted as a national identification system since it was enforced. On the other hand, there are some problems such as leakages of personal informations including RRNs on a large scale and each RRN makes a pair with each person in all areas of the society. Nevertheless leakages of them might cause a big damage, there is no radical countermeasure for they are never changed in actual fact. In Republic of Korea, a RRN acts as a primary key of a database, so it has to be protected by severing the connectivity between leaked RRNs and the other personal data. In this paper, the Unconnected Random Personal Identification Number system is proposed for preventing damage of data spills by removing a dependency which the RRN has. Furthermore, this paper suggests the solutions against some potential issues in the system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.422-428
• /
• 2015

A 2.45GHz microwave plasma source with a linear antenna has been developed for low temperature large scale deposition processing. Microwave power is transmitted through WR340 waveguide and a copper rod, linear antenna, is located in a quartz tube. The power matching is effectively achieved by a linear antenna is located at ${\lambda}_g/4$ or $3{\lambda}_g/4$ from the end of WR340 waveguide. The Ar plasma was generated along the surface of quartz tube and a clear standing wave pattern with nearly 10cm wavelength was observed at Ar pressure of 200mTorr and 200W input power. The electron density and electron temperature were investigated by using the electrostatic probe. The electron density and electron temperature were highly measured near the surface of quartz tube. Ar plasma density along the quartz tube is mostly uniform despite standing wave set-up and antenna of long length. A uniform temperature was measured at 10~40cm distance from the end quartz tube and 5cm distance from the surface of quartz tube.