• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.307-315
• /
• 2014

The gold textile is Korean traditional weaving technique using the gold thread since 5th century. The making technique of gold thread was written in various references, but it is severed because the gold thread weaving equipment and sumptuous moods were forbidden in the early 18th century. There are some studies of traditional gold thread which are mainly about conservation treatment of cleaning and strength. To restore traditional gold thread, investigation of material and manufacturing technique is vitally required. The gold threads are composed of gold leaf, adhesive and base sheet. Gold leaf and base sheet are available for investigation because they are exposed to the surface, whereas adhesive is not easy to investigate because it is not exposed to the surface. In this study, samples are made of pure and impure gold, animal glue and lacquer, and various types of Hanji based on domestic and foreign references to compare materials for gold threads. As a result of morphological character and stability evaluation, the optimum materials for the restoration of gold threads are pure gold, animal glue and Dochimji(smoothing paper by beating). This study is expected to be basic data for manufacturing gold threads techniques and modernization of traditional gold threads hereafter research.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.24-33
• /
• 1987

This study was executed to investigate scanning electron microscopic characteristics of Korean Rhus lacquer coats. With the unrefined coat, distilled water, sodium hydroxide, acetic acid, ethyl alcohol, cold-check test, and accelerated weathering were performed after refining treatment. These treated lacquer coats were discussed through observation by scanning electron microscope and the obtained results were summarized as follows: 1. Compared with unrefined coat, the refined coat of Korean Rhus lacquer showed more even surface with regular distribution of dispression. 2. Korean Rhus lacquer coat heated at $120^{\circ}C$ for 3 hours revealed no observable difference irrespective of refining and unrefining. 3. Korean Rhus lacquer coat treated by distilled water, sodium hydroxide, acetic acid. ethyl alcohol, cold-check test. and ultraviolet radiation showed significant characteristics compared with untreated coat. Especially. large deformation and checkings were observed by cold-check test and ultraviolet radiation respectively. 4. The Korean Rhus lacquer coat radiated by ultraviolet ray showed 0.11 duller and 1.41 brighter than non-radiated coat through color difference calculator.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.109-121
• /
• 2016

Mother-of-pearl turtle shell lacquerware refers to a decoration made of a mother-of-pearl, a turtle shell and metal wires. This lacquerware features bright color tone as it is produced by sprinkling metal powder over its entire surface. This study aimed to find out its material properties and characteristics by using an optical microscopy and conducting a SEM-EDS analysis on the cross section of lacquer coating. As a result, it was found that charcoal powder and soil powder were mixed for undercoating. Then a mixture of cinnabar lacquer and monoclinic arsenic sulfide mineral ($As_2S_3$) was coated on the undercoating and brass powder was sprinkled on top of it. Especially, a little amount of pigment was found on the lacquer layer, which is distinguished from the colors used for conventional lacquer patterns. In addition, it was also found that the cinnabar lacquer and monoclinic arsenic sulfide mineral were mixed together.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.22-27
• /
• 2007

Pacquer traditionally has been used to varnish. Many reports have revealed that lacquer has durability and antimicrobial activities. Therefore, we expect that lacquer will be used as a good antifouling agent to solve the environmental problem. Here we chemically synthesized urushiol, a major component in lacquer and two urushiol derivatives, urusiol regioisomer and cardanol. We also analyzed the antimicrobial activities of these molecules to examine the inhibitory effect on the formation of the biofilms. Our results showed that synthesized urushiol and its derivatives have strong antifungal activities. Urushiol also exhibited inhibitory effect on the growth of gram positive bacteria specifically. However urushiol derivatives have low antibacterial activities.

• Journal of Fashion Business
• /
• v.22 no.1
• /
• pp.100-113
• /
• 2018

From the late 17th to the early 18th century, Europeans were strongly intrigued by products from the East. Therefore, several countries like England, France, and Netherlands formed the 'East India Company' to pursue trade. First, European markets rapidly responded to this desire for exoticism by importing goods; then, they produced imitation Oriental goods. Finally, they made stylistically advanced exotic merchandise from the perspectives of European. In terms of the textile industry, this trend was expressed in the pattern design of silk, or the so called 'bizarre silk.' In this paper, bizarre silk patterns were scrutinized based on a digital archive of museums, catalogues of museums, portal sites, and the literature. The bizarre silk patterns were analyzed then classified into six categories: pseudo-Oriental plant pattern, pattern mingled with architectural motifs, pattern of juxtaposed with Oriental goods, abstract pattern, exuberant pattern with metal threads, and semi-naturalistic pattern. These patterns were characterized according to the following features: strangely large exotic floral patterns were undulating and asymmetrical; exotic foliage and flowers were sometimes mixed with architectural motifs or Oriental goods to easily show the Oriental influence; motifs of bizarre silk patterns were abstractly stylized; bizarre silk patterns became luxurious once more like the Baroque period; finally, floral patterns became more natural, and still exotic motifs remained in the background to maintain the bizarre silk features. These bizarre silk patterns evolved from the viewpoints of Europeans through acceptance stage, compound stage, and confluent stage.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.3
• /
• pp.70-76
• /
• 2007

The raw oriental lacquer produced in China was used in this study. This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually be decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilution at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilution. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in lower concentration, and treated with ethanol mixture. Hanji treated with ethanol dilution at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer became lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.483-493
• /
• 2020

In this paper, we present a nondestructive analysis using X-ray and microscopic investigation to detect the structure, manufacturing technique and preservation status of the Goryeo lacquered box Inlaid with Mother-of-pearl Chrysanthemum and Scroll Design (Goryeo Lacquered Box). We confirm that the Goryeo Lacquered Box consists of the soft wood as the basic material. The soft wood was coated with textile and then lacquered. The box structure of the Goryeo Lacquered Box was formed of wooden boards with wood plants added to the side, after processing into a trefoil-shaped. The wooden sides of the Goryeo Lacquered Box were cut at regular intervals for easier processing into a curved shape. Moter-of-pearl, tortoiseshell, and metal wire were used to decorate the surface. mother-of pearl was the cutting processing, and tortoiseshell was used for back coloring. The metal line was constructed using one line and twist line.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.67-81
• /
• 2021

This study aimed to conduct tree-ring dating and analysis of the materials used for the wooden coffins excavated from the ruins of Sipjeong-dong, Incheon. The tree species for the 10 wooden coffin materials was identified as pine. For accurate tree-ring measurement, the cross section was polished using sandpaper. The annual ring width was measured with an accuracy of 0.01 mm. Since the five materials were consistent with each other in dendrochronology, a representative annual ring chronology of 83 years was prepared. The prepared representative annual ring chronology was compared with the standard annual ring chronology, and the outermost ring of the wooden coffin was confirmed to correspond to the year 1575, suggesting that the wooden coffin was produced in the late 16th century. In addition, microscopic observation and FT-IR analysis revealed that the fibers attached to the surface of the wooden coffin were fibroin (Silk), and infrared spectroscopy (FT-IR) and Py-GC/MS analysis showed that the paint left on the surface of the wooden coffin was lacquer.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.536-544
• /
• 2021

In the present study, safe management and value improvement of bamboo sunblind, which is an item of cultural heritage, were performed by adopting stable conservation treatment methods. The bamboo sunblind used in the present study was excavated from No. 1 catchment site in Baesanseongji, Busan. It was determined that the main material used to make the sunblind was bamboo, and herbal plants were used to weave the bamboo using lacquer as an adhesive agent. All contaminants and soil adhered to the sunblind was removed. Thereafter, the sunblind, which was recovered in the form of blocks, was washed separately after fixing it to a temporary plaster frame and to avoid the blocks from breaking during washing. Then, polyethylene glycol (PEG) impregnation was utilized for the reinforcement treatment. Based on the preliminary test results, the shape of the sunblind was fixed using a stainless-steel frame to prevent physical damage that may occur during the drying process. Thereafter, the bamboo sunblind was vacuum freeze-dried. PEG 20% (in ethyl alcohol) was applied as a surface treatment agent for stabilization the sunblind. After the surface treatment, the bamboo sunblind were joined together to fit the maximum width, and the rectangular shape of the sunblind was restored-as best as possible-while filling in the missing parts by maximizing the use of unknown members such as in the disturbed layers below bamboo sunblind surface. The conservation treatment was completed by fixing the bamboo sunblind into the fabricated frame.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.04a
• /
• pp.380-390
• /
• 2007

The purpose of this study is to make a functional Hanji treated with an oriental lacquer which has various functionalities. The raw oriental lacquer produced in China was used in this study This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The oriental lacquer consisted of 25.04% of water, 60% of urushiol, 3.13% of nitrogen-containing compounds, and 5.66% of gum. The pH of oriental lacquer was 5.3 and the viscosity was 1680 cP. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilutes at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilutes. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in higher concentration, and treated with ethanol mixture. Hanji treated with ethanol dilutes at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer becomes lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture. Color of Hanji treated with the solvent diluted mixture was Y to YR-type, whereas that of Hanji treated with raw oriental lacquer was Y-type, terpene