• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.253-261
• /
• 2021

The purpose of this study was to examine the effects of mindfulness on the stress of university students' lives, and to verify that Positive Affect & Negative Affect have a moderating effect in the relationship between the two variables. The Mindful Attention Awareness Scale, Positive Affect & Negative Affect Schedule, and the life stress scale for college student were utilized for 243 female university students at K Women's University. First of all, Mindfulness of female university affected the stress of college students' lives. Second, Positive Affect did not have a moderating effect in the relationship between female college student's mindfulness and stress. Third, In the relationship between mindfulness and stress, female college students showed a moderating effect. In conclusion, female university students' awareness of mindfulness helped lower interpersonal stress, current task stress, and decreased Negative Affect. The discussion discussed the limitations of this study and the future direction of the study.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.119-126
• /
• 2019

In this paper, a monopole antenna applicable to WLAN standardization is designed, fabricated, and tested. The proposed antenna is designed to have three microstrip lines based on microstrip feeding method and inserted one stub to enhance impedance characteristics. Then, it obtained triple band characteristics of the proposed antenna. We adjusted and optimized the lengths and width of the three microstrip lines and one inserted stub to obtain the required impedance bandwidth for this paper. The proposed antenna has $23.0mm(W){\times}53.1mm(L1)$ on a dielectric substrate of $24.0mm(W1){\times}60.0mm(L){\times}1.0mm$ size. From the fabrication and measurement results, bandwidths of 158 MHz (841 to 1000 MHz) for 900 MHz band, 630 MHz (2.32 to 2.95 GHz) for 2400 MHz band, and 1,040 MHz (4.95 to 5.99 GHz) for 5000 MHz band were obtained based on the impedance bandwidth. The fabricated antenna also obtained the measured gain and radiation pattern characteristics in the required triple band of the proposed antenna.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.654-664
• /
• 2018

In this paper, this system is operated by PCS that is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to DC side with solar cell using a photovoltaic (PV) that it was so called constant voltage charge. it can cause the effect of energy saving of electric power, from 10 to 20%. and through a normal operation of electric energy storage system (EESS). In addition, better output waveform was generated because of pulse width modulation (PWM) method, and it was Proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.498-503
• /
• 2019

Electric propulsion ships are gaining widespread interest in the marine industry owing to extreme air pollution concerns. Consequently, several studies are actively being conducted for improving the power quality. Various methods have been developed that incorporate passive filters, notch filters, and active filters for reducing the harmonic content in the input current of a conventional diode front end rectifier. Among such filters, the active front end (AFE) rectifier is considered as an excellent technology. In this paper, current control for an AFE rectifier employing space vector PWM (Pulse Width Modulation) is proposed. Conventional current control methods for the AFE rectifier, hysteresis, SPWM (Sinusoidal Pulse Width Modulation), and SVPWM (Space Vector Pulse Width Modulation) were simulated by employing the PSIM software tool for analysis and comparisons. The results corroborate that SVPWM has the simplest structure and provides the best performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.54-61
• /
• 2018

Incomplete combustion in automotive engines is a major cause of harmful exhaust gases. In this study, to prevent incomplete combustion and reduce exhaust gas emissions, a gasket blade for increasing the air velocity was applied to the intake manifold, and the change in exhaust gas was investigated theoretically and experimentally. First, simulation analysis for flow according to the number and angle of the gasket blade was performed using a 3D flow analysis program. As an analysis result, the internal average velocity of the gasket blade was optimum at 6-blade with an angle of $30^{\circ}$. Based on the simulation results, experiments were conducted to verify the effects of the gasket blades on the exhaust gas in a non-load engine simulation system. As the engine speed was increased from 2000 to 4000 rpm, exhaust gases of HC, CO, and NOx decreased by 23.4%, 16.5%, and 3.8%, respectively, and the emission decreasing effect was reduced.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.243-253
• /
• 2019

First steps of Planetary exploration are usually conducted with the use of autonomous rovers. These rovers are capable of finding its own path and perform experiments about the planet's surface. This paper makes a proposal for a multi-agent system which effectively take the advantage of a blackboard system for share knowledge and effort of each agent. Agents use Reactive Model with the combination of Belief Desire Intension (BDI) Model and also use a Path Finding Algorithm for calculate shortest distance and a path for travel on the planet's surface. This approach can perform a surface exploration on a given terrain within a short period of time. Information which are gathered on the blackboard are used to make an output with detailed surface soil variance results. The developed Multi-Agent system performed well with different terrain sizes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.702-708
• /
• 2020

Recently, as LED display systems have become larger, research on effective power control methods for the systems has been in progress. This paper proposes a power control method to minimize power loss due to the difference in LED characteristics for each channel of a backlight unit (BLU) system. The proposed LED driver IC has a power optimization function and detects the minimum headroom voltage for constant current operation of all channels and linearly controls the DC-DC converter output. Thus, it minimizes power consumption due to unnecessary additional voltage. In addition, it does not require a voltage sensing comparator or a voltage generation circuit for each channel. This has a great advantage in reducing the chip size and for stabilization when implementing an integrated circuit. In order to verify the proposed function, an IC was designed using Cadence and Synopsys' design tools, and it was fabricated with a Magnachip 0.35um 5V/40V CMOS process. The experiments confirmed that the proposed power control method controls the minimum required voltage of the BLU system.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.60-67
• /
• 2021

Countries around the world, including the U.S. are actively researching to commercialize the logistics services using drones. In Korea, telecommunications companies as well as logistics companies are researching and developing the logistics services using drones. However, there's an environmental difference for last-mile delivery between the U.S. and Korea. In Korea, more than 77% of the population lives in apartments and the population density is the 4th highest in the world. Accordingly, in terms of the logistics services using drones, it is necessary to research it with the Korean suitable environment. In this paper, a precision positioning method of drone last-mile delivery in urban areas using short-range wireless communication and barometer is proposed. The experiment results show that the proposed method can detect a window within 2.5 meters. It is expected that the proposed method will help improve the logistics services using drones in urban areas.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.458-464
• /
• 2020

Drones are being spreaded for the purposes such as construction, logistics, scientific research, recording, toy and so on. However, anti-drone related technologies which make the opposite drones neutralized are also widely being researched and developed because some drones are being used for crime or terror. The range of anti-drone related technologies can be divided into detection, identification and neutralization. The drone neutralization methods are divided into Soft-kill one which blocks the detected drones using jamming and Hard-kill one which destroys the detected ones physically. In this paper, Google and Naver domestic news articles related to anti-drone were gathered. Analyzing the domestic news articles, 8 of related technologies using RF, GNSS, Radar and so on were found. Regarding as this, the general features and usage status of those technologies were described and those on anti-drone for each company and agency were gathered and analyzed.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.791-797
• /
• 2022

Using the fatigue limit (△σ_unsm) and residual stress (σ_r) of the UNSM smooth specimen, the harmless maximum crack depth (α_hml) according to the crack aspect ratio (As) was evaluated. α_hml evaluated the reliability in the relationship between the minimum crack depth (α_NDI1, α_NDI2) detectable by nondestructive inspection(NDI) and the crack depth (α₂₅, α₅₀) that reduces the fatigue limit by 25% and 50%. All α_hml was determined by the crack depth. The α_hml of 80N UNSM with high σ_r and high △σ_unsm was found to be large. σ_r in the depth direction had a much effect on α_hml. Since α_hml>α₅₀(As=0.6-0.1) and α_hml>α₂₅, α₂₅ and α₅₀(some range) can secure the safety and reliability. Since α_hml<α₅₀ (As=1. 0-0. 6), it cannot be made harmless by UNSM. So safety and reliability cannot be secured. α_NDI1 and α_NDI2 are larger than α₂₅, α₂₅ cannot be detected by NDI. α_NDI1 and α_NDI2 are smaller than α₅₀, α₂₅ can detected by NDI.